AKM 10-95 Series Activated Carbon Adsorbers | 日本
日本

AKM 10-95 Series Activated Carbon Adsorbers

Activated carbon adsorbers for volume flows up to 940 m³/h for industrial compressed air treatment applications

属性を選択し、製品検索を改善します。
上記のリストから仕様を選択して下さい。
Description
    The Parker Zander AKM 10-95 range of activated carbon adsorbers are designed to purify pre-dried industrial compressed air down to a remaining oil content of 0,003 mg/m³. The units can be installed free-standing or on a frame. They come equipped with integrated high performance after filtration, pressure gauge and oil indicator and are capable of volume flows up to 940m³/h in a system operating at 7 barg (100 psig).

    Features
    • Volume flows up to 940 m³/h @ 7 barg (100 psig)

    • High performance after filters installed as standard

    • Start-up devices available as an option

    • Oil indicator and pressure gauge included

    Benefits
    • Efficient removal of oil aerosols and oil vapors for highest quality air

    Operation
    Pre-dried compressed air flows from top to bottom through a single vessel containing activated carbon. Any remaining oil aerosols and oil vapors including odours and tastes are removed by the active surface area of the highly porous activated carbon to produce high quality, clean compressed air. Finally, the treated compressed air exits via the validated after-filter into the downstream compressed air network. Using an oil-indicator tube, quality checks can be carried out periodically.

    Sizing and Selection
    Important Note: For quoted air purity performance, compressed air filters must be sized correctly for minimum operating pressure and maximum inlet flow rate using the correction factors found in the Product Information Sheet.

    Please note: The lifetime of the activated carbon filling can vary and is dependent on the contamination type and quantity and also on the humidity of the compressed air.

    For more information or a detailed discussion about your specific requirements please contact Parker or an authorised Parker distributor.
Description

機能特性

最大流量 (cfm)

61.80 @ 7 bar(g) to 553.27 @ 7 bar(g)

最大作動圧力 (barg)

16

最大作動圧力 (psig)

232.06

最小作動圧力 (barg)

5

最小作動圧力 (psig)

72.52

最高周囲温度 (C)

50

最高周囲温度 (F)

122

最低周囲温度 (C)

1.5

最低周囲温度 (F)

34.7

最高作動温度 (C)

50

最高作動温度 (F)

122

最低作動温度 (C)

25

最低作動温度 (F)

77

接続の種類

BSP-P

重量 (kg)

59 to 215

幅 (mm)

420 to 520

奥行き (mm)

480 to 645

高さ (mm)

1450 to 2080

ドライヤーテクノロジー

Activated Carbon Adsorber

ブランド

Parker Zander

証明書

CE, AS1210, TR

後置フィルターの種類

GL9ZLDH to GL14ZLDH

建設材料

Vessels & Piping: Steel, Seals: NBR

お問合せ

パーカー・ハネフィン日本株式会社
東京都港区白金台3-2-10
白金台ビル2F
〒108-0071
電話 03-6408-3901(営業本部)
FAX  03-5449-7202