Antares Series Low Energy Tandem Technology Compressed Air Dryer | 日本
日本

Antares Series Low Energy Tandem Technology Compressed Air Dryer

Compact, energy efficient Tandem Technology dryers for compressed air applications in industrial and processing markets. Available for volume flows up to 2040 m³/h @ 7 bar g and dew points between plus 5°C to -70°C.

属性を選択し、製品検索を改善します。
上記のリストから仕様を選択して下さい。
Description
    Parker Hiross Antares dryers with Tandem Technology are an innovative family of compressed air dryers for volume flows from 150 to 2040 m³/h @ 7 bar g / PDP -40°C. Tandem Technology from Parker Hiross is a further development of the standard hybrid compressed air drying process. Compared to the conventional hybrid compressed air treatment process which is a simple lining-up of a refrigeration and an adsorption dryer, the Tandem Technology goes one step further and fully integrates the two classic drying principles in a compact compressed air treatment package. This unique combination enables high-quality compressed air to be provided to the end-user at low energy consumption levels when compared to more traditional adsorption dryers.

    Benefits
    • A reduction of energy consumption up to 60% against traditional heatless desiccant dryers. This enables a payback time of less than 24 months. Even higher savings are possible in partial load situations or when the required pressure dew point is above 0°C.

    • The pressure dew point is freely adjustable between 5°C and -70°C with no physical changes to the dryer, i.e. like changing an orifice, a nozzle or type of desiccant material in order to reach the desired the dew point.

    • Antares series compressed air dryers work with high compressed air inlet temperatures of up to 65°C.

    • Very low cost of ownership, especially due to reduced maintenance costs. Compared to standard adsorption dryers, Antares series compressed air dryers need much less desiccant material. Additionally, some Antares models do not even need regular vessel inspections, the downtime therefore is very low.

    • Antares helps to keep process safety at a very high level with three integrated high performance filters that are validated according to the demanding ISO12500 standards.

    • Antares series compressed air dryers are very compact; their footprint is considerably smaller compared to standard hybrid dryers of a similar performance.

    Sizing and Selection
    To ensure quoted air purity performance is met, a compressed air dryer must be sized correctly for minimum operating pressure, maximum inlet temperature and maximum inlet flow rate using the correction factors found in the Product Information Sheet.

    For more information or a detailed discussion about your specific requirements please contact Parker or an authorised Parker distributor.
Description

機能特性

最大流量 (m³/h)

150 (@ 7 bar(g) / PDP -40°C) to 2040 (@ 7 bar(g) / PDP -40°C)

最大流量 (cfm)

88 (@ 101 psig / PDP -40°F) to 1200 (@ 101 psig / PDP -40°F)

最大作動圧力 (psig)

232, 174

最高周囲温度 (C)

50

最低周囲温度 (C)

5

定格 IP

44

最高作動温度 (C)

65

最高作動温度 (F)

149

最低作動温度 (C)

5

最低作動温度 (F)

41

接続の種類

BSP-P

重量 (kg)

180 to 950

幅 (mm)

706 to 1007

奥行き (mm)

1246 to 2535

高さ (mm)

1064 to 1720

電気的要件

230V, 1-phase, 50Hz, 400V, 3-phase, 50Hz

最小作動圧力 (barg)

2 or 4, depending on model

冷媒

R134a, R407C

ドライヤーテクノロジー

Tandem Technology (advanced Hybrid)

圧力露点 (C)

+5 to -70

圧力露点 (F)

+41 to -94

ブランド

Parker Hiross

前置フィルターの種類

GL Series ZL Grade High Performance Filters

中間フィルターの種類

GL Series XL Grade High Performance Filters

後置フィルターの種類

GL Series ZL Grade High Performance Filters

消費電力

0.94 kW to 5.17 kW

お問合せ

パーカー・ハネフィン日本株式会社
東京都港区白金台3-2-10
白金台ビル2F
〒108-0071
電話 03-6408-3901(営業本部)
FAX  03-5449-7202