CHO-BOND 1029 TWO COMPONENT FLEXIBLE ELECTRICALLY CONDUCTIVE SILICONE ADHESIVE | 日本
日本

CHO-BOND 1029 TWO COMPONENT FLEXIBLE ELECTRICALLY CONDUCTIVE SILICONE ADHESIVE

CHO-BOND 1029 is a silver plated copper filled, two-component conductive silicone designed for applications where a flexible, strong, conductive electrical bond must be achieved.

属性を選択し、製品検索を改善します。
上記のリストから仕様を選択して下さい。
Description
    Customer Value Proposition:

    CHO-BOND 1029 is a silver plated copper filled, two-component conductive silicone designed for applications where a flexible, strong, conductive electrical bond must be achieved. CHO-BOND 1029 greatly simplifies the problem of bonding conductive silicone EMI gaskets to metal substrates. It is formulated for relatively small bond lines (less than 0.010 inches (0.25mm)), and should not be used as an EMI caulk where bond lines are greater than 0.10 inches (0.25 mm). Low volatile organic compounds (VOCs) and minimal shrinkage upon curing make CHO-BOND 1029 a good choice for a variety of commercial and military applications. Curing of CHO-BOND 1029 can be achieved in as little as 30 minutes with heat to minimize equipment downtime and increase manufacturing throughput. CHO-BOND 1029 is supplied as a two component system, one part liquid and one part wet powder solid. For optimum mixing and material performance, the sand-like solid part should be added incrementally to the liquid part and mixed slowly over a 10 minute time period.

    For best adhesion results, CHO-BOND 1029
    should be used in conjunction with CHO-SHIELD
    1085 primer. Typical applications include bonding,
    repair, and attachment of EMI gaskets, and sealing
    around EMI vents and windows.


    Features and Benefits:

    • Two component
    • Fast heat cure, increases throughput, minimizes equipment downtime.
    • Silver plated copper filler
    • Good conductivity 0.060 ohm-cm.
    • Low VOCs
    • Minimal shrinkage.
    • Heat cure silicone
    • Flexible, 120 minute working life, > 450 psi lap shear strength, 24 hr handling time at room temperature , wide range of application temperatures. 1 week for full cure.
    • Non corrosive cure mechanism
    • No corrosive by-products generated during curing to damage substrate.
    • Thick paste
    • Can be used on overhead or vertical surfaces.
Description

機能特性

ポリマー製品ファミリー

Silicone

フィルター材

Silver-plated copper

プライマー込み

1085

比率

1.0:2.5

Brownish Red

体積抵抗 (ohm-cm)

0.06

せん断強度 (kPa)

3103

比重

3.1

公称硬度 (ショア A)

80

温度の範囲 (C)

-55 to 125

作動時間

2.0 hours

貯蔵寿命 (月)

6

フィルム厚さ (mm)

0.2

お問合せ

パーカー・ハネフィン日本株式会社
東京都港区白金台3-2-10
白金台ビル2F
〒108-0071
電話 03-6408-3901(営業本部)
FAX  03-5449-7202