CHO-BOND 1075 ONE COMPONENT CORROSION RESISTANTELECTRICALLY CONDUCTIVE SILICONE SEALANT | 日本
日本

CHO-BOND 1075 ONE COMPONENT CORROSION RESISTANTELECTRICALLY CONDUCTIVE SILICONE SEALANT

CHO-BOND 1075 is a silver plated aluminum
filled, one-component conductive silicone
designed for use as a fillet, gap filler and
seam sealant on electrical enclosures.

属性を選択し、製品検索を改善します。
上記のリストから仕様を選択して下さい。
Description
    Customer Value Proposition:

    CHO-BOND 1075 is a silver plated aluminum
    filled, one-component conductive silicone
    designed for use as a fillet, gap filler and
    seam sealant on electrical enclosures
    for EMI shielding or electrical grounding.
    Minimum recommended bond line for CHOBOND
    1075 is 0.010 inches (0.25mm). In
    addition, CHO-BOND 1075 may be used for
    EMI gasket repair, bonding, and attachment
    in applications where moderate strength
    (100 psi) is required. The silver aluminum
    filler of CHO-BOND 1075 provides excellent
    galvanic corrosion resistance when applied
    to aluminum substrates. No volatile organic
    compounds (VOCs) and minimal shrinkage
    upon curing make CHO-BOND 1075 a good
    choice for a variety of commercial and
    military applications. CHO-BOND 1075’s
    moisture cure silicone polymer system
    allows it to cure to the touch in 24 hours
    and provides a robust conductive and
    environmental seal over a wide range of
    application temperatures.
    For best adhesion results, CHO-BOND 1075
    should be used in conjunction with CHOSHIELD
    1086 primer. Typical applications
    include man portable electronics, radar and
    communication systems, EMI vents, military
    ground vehicles, and shelters.

    • One component
    • Easy to use, no weighing or mixing required.
    • Silver plated aluminum filler
    • Excellent conductivity 0.010 ohm-cm outstanding galvanic corrosion resistance against aluminum substrates.
    • No VOCs
    • Minimal shrinkage.
    • Moisture cure silicone
    • 15 minute working life, rapid skin formation, 24 hr handling time, requires no pressure during curing, wide range of application temperatures. 1 week for full cure.
    • Light weight
    • More coverage per gram of material, minimal weight added to assembly or vehicle.
    • Non corrosive cure mechanism
    • No corrosive by-products generated during curing to damage substrate.
    • Dry medium paste
    • Can be used on overhead or vertical surfaces.
Description

機能特性

ポリマー製品ファミリー

Silicone

フィルター材

Silver-plated aluminum

パッケージ

1.5 fluid ounce foil tube , 6 fluid ounce SEMCO cartridge

Gray

体積抵抗 (ohm-cm)

0.01

せん断強度 (kPa)

689

比重

2

公称硬度 (ショア A)

81

温度の範囲 (C)

-55 to 200

作動時間

0.25 hour

貯蔵寿命 (月)

6

フィルム厚さ (mm)

0.25 to 3.18

お問合せ

パーカー・ハネフィン日本株式会社
東京都港区白金台3-2-10
白金台ビル2F
〒108-0071
電話 03-6408-3901(営業本部)
FAX  03-5449-7202