GH Series High Pressure Compressed Air Filter (for pressures up to 350 bar g) | 日本
日本

GH Series High Pressure Compressed Air Filter (for pressures up to 350 bar g)

High pressure filters for compressed air applications up to 350 bar g with optimized flow rates and improved housing design for high energy efficiency, maximum reliability and safe operation.

属性を選択し、製品検索を改善します。
上記のリストから仕様を選択して下さい。
Description
    Parker domnick hunter GH series high pressure filters are designed to be ideal for high pressure applications up to 350 bar g. The innovative construction features of the filter housing provide a reliable assembly, as well as simple and safe handling for replacing the filter element. One essential construction feature is the double O-ring seal which protects the housing thread against pollution and humidity and therefore prevents the thread from corrosion. Additionally the second O-ring prevents the filter housing parts from over winding.

    By fastening the filter element via its base thread screwed on the tie-rod, this provides the greatest operating safety, even under the pressure pulsations in intermittent operation that are common for high pressure applications.

    Highly effective pleated media in four different grades provide an element surface that is four times the size, compared to the conventional wrapped design. The result is a reduced flow speed and efficient separation simultaneously with low pressure drop, thus providing cost reduction during operation with reliable separation performance.

    Features
    • Optimised flow rates and compact filter housing.

    • Improved housing design with double O-ring sealing.

    • Threaded rod element fixing.

    • Pleated elements.

    • Complete filter including filter element and manual drain.

    • As an option filters are also available without a drain.

    • All filter sizes offer connectors for the installation of calibrated differential pressure gauges.

    Sizing and Selection
    To ensure quoted air purity specification is met, more than one filtration grade may be required.

    Important Note: For quoted air purity performance, compressed air filters must be sized correctly for minimum operating pressure and maximum inlet flow rate using the correction factors found in the Product Information Sheet.

    For more information or a detailed discussion about your specific requirements please contact Parker or an authorised Parker distributor.
Description

機能特性

エレメント交換間隔

12 months for V, ZP and XP elements / 3 months or max. 1500 hours of operation for A elements

ろ過効率

99.99% to 99.99999%, depending on filter type

残存オイル含有量

0.01 mg/m³ @ 20 °C (XP), 0.5 mg/m³ @ 20 °C (ZP), n.a. (V), 0.003 mg/m³ @ 20 °C (A)

最大流量 (m³/h)

365 @ 350 bar(g) to 4261 @ 350 bar(g)

最大流量 (cfm)

214 @ 5076 psig to 2507 @ 5076 psig

最大作動圧力 (barg)

350

最大作動圧力 (psig)

5076

最高作動温度 (F)

176 or 104 for filters with activated carbon elements

最低作動温度 (C)

1.5

最低作動温度 (F)

34.7

建設材料

Housing: Aluminum, anodized / Seals: NBR (G3 - G7), Housing: Steel / Seals: NBR (G9 - G13)

重量 (kg)

2.8, 3.4, 18.2, 21.9, 28.3, 39.2

重量 (lbs)

6.17, 7.49, 40.12, 48.28, 62.39, 86.42

幅 (mm)

80, 116, 125

幅 (inch)

3.15, 4.56, 4.92

高さ (mm)

355, 232, 420, 297, 455, 332, 540, 417, 655, 532, 910, 787

高さ (inch)

13.97, 9.13, 16.53, 11.69, 17.91, 13.07, 21.26, 16.42, 25.78, 20.94, 35.82, 30.98

接続の種類

BSP-P (DIN ISO 228)

ミクロン等級 (µm)

0.01, 1, 3, n.a., depending on filter type

ドレーンポートサイズ

G1/4i

ブランド

Parker domnick hunter

事前処理要件

depending on filter type

証明書

PED Fluid Group II, TR

用途の種類

Filtration of compressed air and gaseous Nitrogen

お問合せ

パーカー・ハネフィン日本株式会社
東京都港区白金台3-2-10
白金台ビル2F
〒108-0071
電話 03-6408-3901(営業本部)
FAX  03-5449-7202