Hypersep STH & SFH series high pressure centrifugal water separator (For pressures up to 40 barg) | 日本
日本

Hypersep STH & SFH series high pressure centrifugal water separator (For pressures up to 40 barg)

PED approved centrifugal high pressure water separators with low pressure drop for the removal of bulk condensate water from compressed air in industrial applications.

属性を選択し、製品検索を改善します。
上記のリストから仕様を選択して下さい。
Description
    Hypersep high pressure water separators utilise centrifugal technology for the effective removal of bulk liquid from a compressed air system; providing essential downstream protection as well as the added benefit of improving the performance of other downstream equipment.

    Designed to be maintenance free, Hypersep high pressure water separators are available in both threaded and flanged connections and can be installed in horizontal or vertical configuration. Hypersep Series water separators are available for volume flows up to 5826 m³/hr and operating pressures of up to 40 barg.

    Requiring no external power, the easy to install Hypersep features unique Hirosheild surface protection, enabling the water separator to withstand the toughest industrial conditions. Hypersep high pressure water separators are available in carbon steel and are designed to operate at pressures up to 40 barg.

    Sizing and Selection
    Important Note: For quoted air purity performance, water separators must be sized correctly for minimum operating pressure and maximum inlet flow rate using the correction factors found in the Product Information Sheet.

    For more information or a detailed discussion about your specific requirements please contact Parker or an authorised Parker distributor.
Description

機能特性

最大作動圧力 (barg)

40

最大作動圧力 (psig)

580.15

重量 (kg)

4.5 to 151

重量 (lbs)

9.92 to 332.90

幅 (mm)

148 to 660

幅 (inch)

5.83 to 25.98

高さ (mm)

280 to 1135

高さ (inch)

11.02 to 44.69

接続の種類

BSP-T or Horizontal Flanged DIN EN 1092-1

最大流量 (cfm)

31.78 to 3429.08

建設材料

Housing: Carbon Steel, Seals: FASIT 50

最高作動温度 (C)

65

最高作動温度 (F)

149

最低作動温度 (C)

0

最低作動温度 (F)

32

ブランド

Parker Hiross

証明書

PED, others on request (GOST, ASME, SELO)

用途の種類

Bulk liquid removal from compressed air and gaseous nitrogen

お問合せ

パーカー・ハネフィン日本株式会社
東京都港区白金台3-2-10
白金台ビル2F
〒108-0071
電話 03-6408-3901(営業本部)
FAX  03-5449-7202