WVM Series Large Flow Low Energy Vacuum Regenerated Compressed Air Dryer | 日本
日本

WVM Series Large Flow Low Energy Vacuum Regenerated Compressed Air Dryer

For large flow industrial compressed air applications providing volume flows of up to 14500m³/h and pressure dew points down to -70°C, with energy savings of up to 25%.

For large flow industrial compressed air applications providing volume flows of up to 14500m³/h and pressure dew points down to -70°C, with energy savings of up to 25%.

属性を選択し、製品検索を改善します。
上記のリストから仕様を選択して下さい。
Description
    Parker Zander WVM compressed air dryers provide an energy efficient heat regenerated compressed air drying solution for large scale compressed air applications. Ideal for electronics and automotive production plants but suitable for all general manufacturing industries where typically high volume flows and low pressure dew points are required.

    Providing energy savings of up to 25% compared to conventional systems, WVM series compressed air dryers can be equipped with heat exchangers that allow steam or other available process heat sources to be used for heat regeneration. This alternative regeneration process can be employed in addition to or instead of the standard electrical heaters, resulting in even higher energy savings.

    Features
    • Two layered desiccant bed

    • Active heating under vacuum

    • Intensive cooling

    • Pressure build-up on the wet side

    • Dew point control as standard

    • Changeover without dewpoint peak

    • Reliable dewpoint down to -70°C

    • Function alarm

    • Various options for optimal adaptability to customer needs

    Benefits
    • Low energy costs

    • No air loss

    • Regeneration without purge air

    • Low regeneration temperature

    WVM series compressed air dryers combine highest quality and reliability with the added peace of mind of being covered by an extended warranty scheme*, as well as being backed by a variety of global approvals.

    Sizing and Selection
    To ensure quoted air purity performance is met, a compressed air dryer must be sized correctly for minimum operating pressure, maximum inlet temperature and maximum inlet flow rate using the correction factors found in the Product Information Sheet.

    For more information or a detailed discussion about your specific requirements please contact Parker or an authorised Parker distributor. *For details on extended warranty, please see www.polewr.com.
Description

機能特性

最大流量 (cfm)

247 (@ 101 psig / PDP -13°F) to 8534 (@ 101 psig / PDP -13°F)

最大作動圧力 (barg)

10

最大作動圧力 (psig)

145

最高周囲温度 (C)

40 °C for intake air for regeneration; otherwise 50 °C

最低周囲温度 (C)

1.5 (insulation required if temperature is below 15°C)

定格 IP

54

最高作動温度 (C)

40

最高作動温度 (F)

104

最低作動温度 (C)

20

最低作動温度 (F)

68

ポートサイズ

DN40 to DN250, depending on model

接続の種類

Flange acc. to EN 1092-1

重量 (kg)

570 to 13500, depending on model

幅 (mm)

1140 to 3500, depending on model

奥行き (mm)

990 to 2380, depending on model

高さ (mm)

2230 to 4200, depending on model

電気的要件

400V, 50Hz

コントローラーの種類

ZDMC2 with Touch Panel

最小作動圧力 (barg)

4

消費電力

3 kW to 98 kW, depending on model

ドライヤーテクノロジー

Vacuum Heat Regeneration with Zero Purge

圧力露点 (C)

-25°C to -70°C

圧力露点 (F)

-13°F to -94°F

ブランド

Parker Zander

コミュニケーションインターフェース

Modbus RS485, Ethernet RJ45, Profibus Slave (Option)

証明書

PED, other certificates or approvals on request

お問合せ

パーカー・ハネフィン日本株式会社
東京都港区白金台3-2-10
白金台ビル2F
〒108-0071
電話 03-6408-3901(営業本部)
FAX  03-5449-7202