Gantry Robot System 2: Two Axis XX''-YY'' | Parker NA

Gantry Robot System 2: Two Axis XX''-YY''

Designed for rapid transport of moderate to heavy loads (30-200kg) in a single horizontal plane, the System 2 gantry robot system provide 2 axes of motion and is capable of high speeds and accelerations over travels of up to 7.9m x 3.0m

Description
    Parker's seven standard gantry system configurations are designed to satisfy the vast majority of gantry robot applications. By standardizing on these configurations, Parker has simplified sizing and selection, shortened lead times, and reduced costs for users of these systems. The travels and loads indicated are nominal, and should not be considered limiting factors. Longer travels and increased loads are attainable depending upon the combination of parameters.

    "System Two" utilizes two linear modules in both axes (X & Y). The second linear module of the Y-axis is an idler unit which increases load capacity (normal and moment) and permits longer travel. The addition of this unit doubles the load capacity over System One. Traction force can be improved by linking the second axis (Y) module to the first with a common drive shaft. The link shaft doubles the potential acceleration of the system. This system is intended for moderate to heavy loads.

    System Two - Technical Overview:
    • Configuration : XX"-YY"
    • Maximum Work Area : 7.9m (X) * 3.0m (Y)
    • Maximum Load : 30 - 200 kg
    • Drive Mechanism : Belt


    Parker's gantry systems provide cost-effective, easy to integrate solutions that satisfy the vast majority of automation requirements. In addition to our standard gantry systems, Parker offers products with additional capabilities to fulfill the needs of special applications. Our engineering skill and manufacturing expertise have integrated these products into custom-tailored gantry solutions which have successfully addressed the most unique and exacting requirements of machine builders and integrators around the world.

    Additional Capabilities:
    • Motors, Drives and Controls
    • Extended Travels
    • Rotary Motion Modules
    • Cleanroom Preparations
    • External Position Feedback
    • Vertical Axis Brakes
    • End Effectors
    • Protective Guarding
    • Custom Support Structures
Description

Performance Characteristics

Product Type

Gantry Robot

Configuration

XX"-YY"

Drive Type

Belt

Maximum Stroke (mm)

7900 (X) * 3000 (Y)

Maximum Speed (m/s)

2.0 (X) * 4.0 (Y)

Maximum Payload Range

30 ... 200kg

Repeatability

± 0.2 mm

Additional Protection Option

Steel Strip Cover

Contact Us

Electromechanical and Drives Division
North America
9225 Forsyth Park Drive
Charlotte
NC
United States
28273
Phone 800-358-9070
Fax  707-584-8015