Gantry Robot System 6: Three Axis XX''-YY''-Z | Parker NA

Gantry Robot System 6: Three Axis XX''-YY''-Z

Designed for rapid transport of light to moderate loads (10-100kg) in both the horizontal & vertical planes, the System 6 gantry robot system provide 3 axes of motion and is capable of high speeds and accelerations over travels of upto 7.9m x 3.0m x 1.0m

Description
    Parker's seven standard gantry system configurations are designed to satisfy the vast majority of gantry robot applications. By standardizing on these configurations, Parker has simplified sizing and selection, shortened lead times, and reduced costs for users of these systems. The travels and loads indicated are nominal, and should not be considered limiting factors. Longer travels and increased loads are attainable depending upon the combination of parameters.

    "System Six" is a three-axes version of System Two. HPLA/HLE linear modules provide motion in the X and Y directions while a vertically mounted ET cylinder provides the third axis (Z) of motion. The ET cylinder provides high vertical thrust capacity at moderate speeds. With the Z-axis retracted, this system can transport moderate to heavy loads at high rates of speed over long travel distances.

    System Six - Technical Overview:
    • Configuration : XX"-YY"-Z
    • Maximum Work Area : 7.9m (X) * 3.0m (Y) * 1.0m (Z)
    • Maximum Load : 10 - 100 kg
    • Drive Mechanism : Belt / Ballscrew


    Parker's gantry systems provide cost-effective, easy to integrate solutions that satisfy the vast majority of automation requirements. In addition to our standard gantry systems, Parker offers products with additional capabilities to fulfill the needs of special applications. Our engineering skill and manufacturing expertise have integrated these products into custom-tailored gantry solutions which have successfully addressed the most unique and exacting requirements of machine builders and integrators around the world.

    Additional Capabilities:
    • Motors, Drives and Controls
    • Extended Travels
    • Rotary Motion Modules
    • Cleanroom Preparations
    • External Position Feedback
    • Vertical Axis Brakes
    • End Effectors
    • Protective Guarding
    • Custom Support Structures
Description

Performance Characteristics

Product Type

Gantry Robot

Configuration

XX"-YY"-Z

Drive Type

Belt | Ballscrew

Maximum Stroke (mm)

7900 (X) * 3000 (Y) * 1000 (Z)

Maximum Speed (m/s)

2.5 (X) * 2.5 (Y) * 1.0 (Z)

Maximum Payload Range

10 ... 100kg

Repeatability

± 0.2 mm

Additional Protection Option

Steel Strip Cover

Contact Us

Electromechanical and Drives Division
North America
9225 Forsyth Park Drive
Charlotte
NC
United States
28273
Phone 800-358-9070
Fax  707-584-8015