Gantry Robot System 7: Three Axis XX''-YY''-Z | Parker NA

Gantry Robot System 7: Three Axis XX''-YY''-Z

Designed for rapid transport of moderate loads (50-100kg) in both the horizontal & vertical planes, the System 7 gantry robot system provide 3 axes of motion and is capable of high speeds and accelerations over travels of upto 7.9m x 3.3m x 1.5m

    Parker's seven standard gantry system configurations are designed to satisfy the vast majority of gantry robot applications. By standardizing on these configurations, Parker has simplified sizing and selection, shortened lead times, and reduced costs for users of these systems. The travels and loads indicated are nominal, and should not be considered limiting factors. Longer travels and increased loads are attainable depending upon the combination of parameters.

    "System Seven" is a three-axes system which utilizes the HZR unit for the vertical axis. As a result, this system can provide longer vertical travel, higher speed, and greater acceleration than System Six. The inherent rigidity of the HZR also contributes to superior  system stiffness, stability, and ease of tuning. If the Z-axis is retracted during horizontal motion, System Seven can easily handle moderate to heavy loads. With the Z-axis fully extended it can handle light to moderate loads.

    System Seven - Technical Overview:
    • Configuration : XX"-YY"-Z
    • Maximum Work Area : 7.9m (X) * 3.3m (Y) * 1.5m (Z)
    • Maximum Load : 50 - 100 kg
    • Drive Mechanism : Belt

    Parker's gantry systems provide cost-effective, easy to integrate solutions that satisfy the vast majority of automation requirements. In addition to our standard gantry systems, Parker offers products with additional capabilities to fulfill the needs of special applications. Our engineering skill and manufacturing expertise have integrated these products into custom-tailored gantry solutions which have successfully addressed the most unique and exacting requirements of machine builders and integrators around the world.

    Additional Capabilities:
    • Motors, Drives and Controls
    • Extended Travels
    • Rotary Motion Modules
    • Cleanroom Preparations
    • External Position Feedback
    • Vertical Axis Brakes
    • End Effectors
    • Protective Guarding
    • Custom Support Structures

Performance Characteristics

Product Type

Gantry Robot



Drive Type


Maximum Stroke (mm)

7900 (X) * 3300 (Y) * 1500 (Z)

Maximum Speed (m/s)

2.5 (X) * 2.5 (Y) * 1.5 (Z)

Maximum Payload Range

50 ... 100kg


± 0.2 … ± 0.5 mm

Additional Protection Option

Steel Strip Cover

Contact Us

Electromechanical and Drives Division
North America
9225 Forsyth Park Drive
United States
Phone 800-358-9070
Fax  707-584-8015