Tangent Arm Driven Manual Rotary Stages - 2500 Series | Parker NA

Tangent Arm Driven Manual Rotary Stages - 2500 Series

The 2500-series of tangent arm driven manual rotary stages offer low friction rotary positioning, precise angular adjustment at any position and position locking. Available with optional dial or vernier, they are suitable for payloads of up to 10 lbs

Select attributes to see if your product is available for online purchase.
Please choose from the product attributes above to continue.
Description
    The 2500-series rotary stages offer low friction rotary positioning, precise angular adjustment at any position and position locking.
    • Dial and Vernier option
    • 360 degree rotation
    • 10 lb payload capacity

    Parker rotary stages are designed to produce precision rotary motion. The basic components in these stages are a base, precision bearing, drive mechanism and top (load platform). The base of all the units house the main bearing and drive mechanism and is designed to be mounted to a stationary surface. The main bearings provide low friction contact between the base and top. The drive mechanism used is a tangent arm and the table top provides a mounting surface for mounting payloads. The tangent arm drive mechanism produces a very fine resolution over a limited rotary travel range. Angular rotation is controlled by three control knobs. The release knob disengages the shaft from the drive, freeing the table to be rotated by hand to a desired location. The release knob is then tightened to re-engage the drive mechanism and transfer control to the adjustment knob which, when rotated, produces precise angular positioning of the shaft and table top. The locking knob can then be used to positively lock the table at the desired setting.
Description

Performance Characteristics

Product Type

Rotary Stage

Series

2500 Series

Axis Count

1

Bearing Type

Cross Roller

Mounting Option

English | Metric

Travel Distance (deg)

360° / 10° fine

Width (inch)

1.75 ... 2.62

Width (mm)

44.4 ... 66.5

Payload (lbs)

10

Payload (kg)

4.5

Drive Mechanism

12 arc-min vernier | No Readout

Contact Us

Electromechanical and Drives Division
North America
9225 Forsyth Park Drive
Charlotte
NC
United States
28273
Phone 800-358-9070
Fax  707-584-8015