Pneumatic Guided Cylinder Slide - P5T Series | Parker NA

Pneumatic Guided Cylinder Slide - P5T Series

P5T is an integral cylinder designed for standard to heavy duty short-stroke applications. The max operating pressure is 145 psi. Bore sizes range from 16-100mm with standard strokes from 10-200mm. Rod lock & oversize rod options are available.

P5T is an integral cylinder designed for standard to heavy duty short-stroke applications. The max operating pressure is 145 psi. Bore sizes range from 16-100mm with standard strokes from 10-200mm. Rod lock & oversize rod options are available.

Use our configurator to build the right part for your application.
Description
    The P5T series short stroke thrust slide is designed for heavy duty short stroke applications where mounting envelopes are limited and substantial side-loading is present.  Built into the housing are four composite bushings which guide two parallel precision ground case hardened and chrome plated support shafts. This compact housing minimizes overall body length and width, allowing use in very confined spaces. The unitized body integrates a low profile cylinder which contains a wear band and piston magnet. The body comes standard with top ports; rear and side porting is optional.  Also, built into the body are piston bumpers, which reduce noise and dissipate energy, resulting in longer operating life. Standard dowel pin holes provide precision mounting for the body and tool plate.

    P5T short stroke thrusters are ideal for conveyor line stops, tamping boxes in packaging applications, presses, parts transfer, machine loading/unloading, clamping, assembly and many other factory automation applications. Available options include linear ball bearings, high load bearing configurations, NPT and BSPP porting, corrosion resistant shafting, and dual tooling plates.

    • Bore sizes: 16, 20, 25, 32, 40, 50, 63, 80, and 100mm
    • Standard strokes: 10 to 200 mm depending on model, custom stroke lengths available
    • Operating characteristics: double acting
    • Maximum operating pressure: 1MPa (145 psi or 10 bar)
    • Operating temperature range (cylinder):
          Standard seals: 0°F to 165°F or -17°C to 74°C
          Fluorocarbon seals:  0°F to 250°F or -17°C to 121°C
    • Support rod sizes: 8, 10, 12, 16, 20, 25, 30, and 35mm
    • Energy absorption:  bumpers and shock absorbers
    • Stroke adjustment:  adjustable stop collars
    • Flow controls:  Presto-lok and NPT
    • Switches and Sensors:  standard magnetic piston, optional reed switches or solid state and proximitysensors.  Sold separately.
    • Filtration requirement: 40 micron, filtered dry air
    • Rod lock option available
Description

Performance Characteristics

Cylinder Type

Guided

Cylinder Action

Double Acting

Bore Size

16mm | 20mm | 25mm | 32mm | 40mm | 50mm | 63mm | 80mm | 100mm

Maximum Stroke (mm)

200

Maximum Stroke (inch)

8

Extend Stroke Thrust (N)

120 to 4712 (at 6 bar)

Extend Stroke Thrust (lbs)

-

Retract Stroke Thrust (N)

90 to 4418 (at 6 bar)

Retract Stroke Thrust (lbs)

-

Cushioning Type

-

Port Size

M5 | 1/8 | 1/4 | 3/8

Rod End Thread Type

-

Maximum Working Pressure (bar)

10

Maximum Working Pressure (psi)

145

Operating Temperature (C)

-18 to +74 (Standard) | -18 to +121 (High)

Operating Temperature (F)

0 to +165 (Standard) | 0 to +250 (High)

Position Sensing

Groove Mounted

Mounting Option

Yes

Certificates

-

Piston Rod Material

Stainless Steel Piston Rod

Body Material

Anodized Aluminium

End Cap Material

Anodized Aluminium

Body Type

Extrusion

Corrosion Resistant Option

Yes

Repairable

Yes

Please configure part to display CAD

Contact Us

PNEUMATIC DIVISION NORTH AMERICA
8676 EAST M89
RICHLAND MI 49083 USA
Phone 269-629-5000. Customer Support & Applications Eng: 1-877-321-4PDN
Fax  269-629-5385