Parker PGI’s Body Vent Bleeder Fittings are offered in two styles of Body Vent (Bleeder) Wellhead Grease Fittings, the Standard Hex Head Style and the Hex Socket Head Style. Both are used to bleed pressure from valve bodies in service to 10,000 PSI.
Both styles of Body Vent Fittings come standard with a stop pin to prevent the stinger from backing all of the way out of the fitting. In addition, both styles have the vent port on the side of the fitting instead of venting from the top which could be a safety issue in certain applications.
• Oil and Gas
• Service up to 10,000 PSI
• O’ring seal to prevent leakage through stem cavity
• Compact Designs
• ½” to 1” NPT sizes
• Wellhead Equipment maintenance
• Valve Body pressure relief
Standard Hex Head | Hex Socket Head
Connection Thread Size (inch)
1-1/2" NPT to 1/4" NPT
1215 | 316 SS | 4140 | Consult factory for additional materials
Nut Hex Size (inch)
2" to 7/8"
2-5/8" to 1-5/8"
Annealed (NACE) | Rc 22 Max (NACE) | N/A
440 SS | Tungsten Carbide | Consult factory for additional materials
Please configure part to display CAD