Compact Inline Desiccant Dryers - DD15, DD30, DD60 Series | Parker NA

Compact Inline Desiccant Dryers - DD15, DD30, DD60 Series

DD15, DD30 and DD60 are compact sized point-of-use inline desiccant dryers that remove all traces of water vapor, oil vapor and particulate. They are designed for intermittent and not continuous use applications.

Description
    The DD15, DD30 and DD60 inline desiccant dryers should be used for intermittent and not continuous use applications.  Always place a bulk separator, particulate and coalescing filter upstream of the desiccant dryer. Desiccant coated with oil will not absorb oil and will render it useless. A check valve should also be installed at the dryer inlet to maximize the life of the desiccant. (Note: that desiccant must be ordered separately.) These compact inline desiccant dryers are a convenient and cost effective means of ensuring your sensitive intermittent pneumatic applications are not exposed to damaging moisture. As wet air enters through the inlet, the air travels down through a bed of desiccant which absorbs the water vapor and aerosols. The silica gel desiccant beads will reduce the humidity down to a -40°F ( -40°C) pressure dew point.  After the moisture has been removed, the dry air passes through a sintered bronze filter element (eliminating desiccant dust downstream), up the tube and out the outlet port. As the desiccant becomes saturated with moisture, the dew point will begin to rise. This is evident when the green silica gel desiccant beads in the onboard sight glass change to orange, indicating the need for desiccant replacement. Simply remove the flange and bowl and replace with new desiccant.  

      • Dryer Type: Inline Desiccant
      • Body Material: Aluminum | Steel
      • Port Type: NPT | BSPP
      • Port Size: 1/4" | 3/8" | 1/2" | 3/4" | 1"
      • Maximum Flow Capacity (SCFM): 15 - 60
      • Operating Pressure Range: 0 to 300 psi / 0 to 20.6 bar
      • Operating Temperature Range: 32° to 180°F / 0° to 82°C
      • Dew Point: -40°F or -40°C
      • Desiccant Type: Silica Gel
      • Desiccant Capacity (lbs.):  2.5 - 10
      • Filter Element (μm):  90 | 40
      • Weight Full (lbs.):  10.5 - 30
      • Weight Full (kg):  4.8 - 13.6
Description

Performance Characteristics

Function

Inline Desiccant Dryer

Body Material

Aluminum | Steel

Port Type

NPT | BSPP

Port Size

1/4" | 3/8" | 1/2" | 3/4" | 1"

Flow Rate (SCFM)

15 | 30 | 60

Operating Pressure (psig)

0 to 300

Operating Pressure (bar)

0 to 20.6

Operating Temperature (F)

+32° to +180°

Operating Temperature (C)

0° to +82°

Dewpoint (F)

-40°

Dewpoint (C)

-40°

Desiccant Type

Silica Gel

Desiccant Capacity (lb)

2.5 | 5 | 10

Filter element

90μm | 40μm

Weight (lb)

10.5 | 18 | 30

Weight (kg)

4.8 | 8.2 | 13.6

Contact Us

PNEUMATIC DIVISION NORTH AMERICA
8676 EAST M89
RICHLAND MI 49083 USA
Phone 269-629-5000. Customer Support & Applications Eng: 1-877-321-4PDN
Fax  269-629-5385