No image available
No image available
Your request is being processed.
687563
Plastic and Fluoropolymer Tubing

Nylon Air Brake Tubing - Series 1120

Parflex Air Brake Tubing is 100% pressure tested, meets SAE Specification J844, has excellent abrasion and kink resistance and is designed for use in air brake and transportation applications.

Roll On To Zoom


Parflex Air Brake Tubing is 100% pressure tested, meets SAE Specification J844, has excellent abrasion and kink resistance and is designed for use in air brake and transportation applications.

Choose attributes to view part number:

Reset Attributes
Description

Recognized as the global leader in air brake tubing, Parker develops brake system connections that maintain a basically fixed relationship between couplings during vehicle operation. The tubing is made from virgin nylon and is available in more than ten colors for quick identification of lines. In addition, air brake tubing can be manufactured and prepared in pre-cut lengths, harnesses and preformed bundles that can reduce installation times by more than 70%. In tractor, trailer and other mobile air brake applications, time studies show an average chassis harness installation took 4 employees about 40 minutes to complete. However, with a Parflex preformed harness, installation time dropped to 10 minutes and only 1 employee was required to complete the isntallation. Based on labor rates of $30/hr, customers saved over $75 an hour and 150 production minutes. With reduced manufacturing and labor costs, increased dimensional stability, and excellent UV stability, the Parflex 1120 Series Air Brake Tubing is the optimal solution for air brake applications in expanding transportation markets.

Markets:
• Transportation
• Military
• RV & Bus

Features:
• 100% pressure tested
• Excellent UV stability for extended tubing life
• Abrasion resistant for added protection
• Kink resistant, allowing for less downtime due to kinking failure
• Available in more than ten colors for quick identification of lines
• No plasticizers
• Reduced manufacturing and labor costs due to harness and preformed bundle options
• Tubing maintains extended dimensional integrity and stability for durability and increased tubing life

Applications:
• Air brake lines

Certifications/Compliance:
• Meets SAE Specification J844
• Meets DOT FMVSS 49CFR 571.106

Technical Specifications:
• Material:
         Type A - Single-wall extruded Nylon (polyamide)
         Type B - Nylon (polyamide) core, fiber reinforcement, Nylon        (polyamide) cover/sheath
• Working and burst pressures rated at 73°F (23°C)
• The wall thickness is for reference only
• Packaged on reels

Description

Performance Characteristics
Tube O.D. (inch) 0.125 - 0.750
Tube O.D. (mm) 3.2 - 19.1
Tube I.D. (inch) 0.079 - 0.566
Tube I.D. (mm) 2.0 - 14.4
Tube Wall Thickness (inch) .023 - .092
Tube Wall Thickness (mm) 0.6 - 2.3
Maximum Working Pressure (psi) 150
Maximum Working Pressure (bar) 10.3
Minimum Burst Pressure (psi) 800 - 1400
Minimum Burst Pressure (bar) 55.2 - 96.5
Minimum Bend Radius (inch) 0.37 - 3
Minimum Bend Radius (mm) 9.4 - 76.2
Minimum Working Temperature (F) -40
Minimum Working Temperature (C) -40
Maximum Working Temperature (F) 200
Maximum Working Temperature (C) 93
Application Transportation, Air Brake
Media Brake Fluid
Industry Standards DOT 49CFR571.106, SAE J844
Compatible Fittings NTA, PTC, PMT
Tubing Material Nylon, Nylon with fiber reinforcement

???ATTACHMENTS???

Contact Us


PARFLEX DIVISION


1300 N FREEDOM STREET

RAVENNA

OH

UNITED STATES

44266


Ph:3302962871


Fax:3302968433