The DC590G Integrator series meets the demands of the most complex motor control applications. Extensive application software (including winder control as standard) together with Function Block Programming and configurable I/O creates a total drive system in a single module.
Options :
ā¢ Technology Box for Communications (Profibus, RS485)
ā¢ Speed Feedback Technology Box (analogue Tachometer, 5701 Plastic Fibre Microtach, Wire-ended Encoder , 5901 Glass Fibre Microtach.)
Features & Advantages:
ā¢ Extremely simple set-up and programming
ā¢ Extremely Compact
ā¢ Motor Thermistor Input
Macro Function Blocks:
ā¢ Open-loop winder control
ā¢ Winder control - loadcell/dancer
ā¢ Math functions
ā¢ Embedded controller functions
Technical Specifications:
ā¢ Power Supply: Three Phase 380VAC Ā± 10 %, 50-60 Hz Ā± 5%
ā¢ Output Armature Current Ratings: 35 - 270A
ā¢ Overload:150% for 30 sec / 200% for 10 sec
ā¢ Environment:
for 35 to 70A drives : 0-45Ā°C / 32-113Ā°F
for 110 to 270A drives : 0-35Ā°C / 32-95Ā°F
ā¢ Protection:IP00
ā¢ Speed Feedback:
Armature Voltage Feedback / analogue Tachometer / Encoder / Optical Fiber Microtach encoder
ā¢ Analog Inputs:
5 Total : 1 x 12 bit, 4 x 10 bit
- 1x Speed Demand Setpoint (-10/0/+10V) / 4x Configurable
ā¢ Analog Outputs:
3 Total : 10 bit
- 1x Armature Current Output (-10/0/+10V or 0-10V) / 2x Configurable
ā¢ Digital Inputs:
9 Total : 24VDC (max 15mA)
- 1x Program Stop / 1x Coast Stop / 1x External Stop / 1x Start-Run / 5x Configurable
ā¢ Digital Outputs:
3 Total : 24VDC / 100mA
- 3x Configurable
ā¢ Reference Supplies:
1x +10VDC / 1x -10VDC / 1x +24VDC
ā¢ Power Bridge:
590G - 4 Quadrant Regenerative : Dual Three Phase SCR bridges
591G - 2 Quadrant Non-Regenerative : Single SCR bridge
Variable Field Control with SCR's
ā¢ Drive Protection:
High energy MOV's / Heatsink overtemperature / Instantaneous overcurrent
Thyristor trigger failure / Inverse time overcurrent / Interline snubber network
Field Failure / Zero speed detection / Speed feedback failure / Stall protection
Motor overtemperature