Accionadores giratorios neumáticos

Radial piston type air motor TAM4 series that can be installed in any direction by grease filling type. Since it is pneumatically driven, it is completely explosion-proof without sparks.

Pneumatic Driven Diaphragm Pump TD series that supports pumping of chemicals such as acids and alkalis, organic solvents, slurry liquids, and viscous liquids. There are 4 types of pump capacity.

Lightweight and compact high-speed vane type air motor TAV3 series. The output ratio to the volume ratio of the main body is high, and it is completely explosion-proof due to the pneumatic drive type.

It is a pneumatic rotary actuator TRA-1 series that rotates by a rack and pinion. There are 5 types of cylinder bore size from φ63 to φ80, and 3 types of mounting styles.

PRH series are compact and stable operation pneumatic rotary actuators.

PRF series are used for air-hydro systems and suitable for operation at low speed.

The HP series actuator combines an alloy steel gear set with a high strength aluminum housing and precision, micro-finish, seamless, alloy steel tubing cylinders into an actuator suitable for numerous applications where  higher torques are required.

The PTR series actuator is ideal for most pneumatic applications. The PTR combines alloy steel gears set with a high strength aluminum housing and Parker 3L or 2A series cylinder components into an actuator suitable for years of trouble free service.

Los accionadores de paleta rotatoria PV vienen en 4 tamaños y un par de torsión de 0,69 a 30,96 Nm a 6 bar. Con dos versiones, paleta única a 280° y doble paleta a 100°, que produce el doble de salida de par de torsión con las mismas dimensiones.

La serie RA consiste en un accionador compacto de doble efecto y alto par de torsión, con ángulos de rotación de 90° o 180°. Disponible en 5 tamaños, los pistones dobles transmiten un rango de par de giro de 20 a 200 Nm hacia el eje de salida.

The P1V-A ATEX certified air motor is available in six sizes and power ratings from 1600 to 18000 Watts. Motors have IEC flange mountings and optional planetary, helical or worm drive gearboxes for correct speed and torque selection.

The P1VAS ATEX certified stainless steel air motor is available in six different sizes and power ratings of 120 to 1600 Watts, and speeds from 50 to 22 000 rpm with integrated planetary.

The VRS / VRA rotary actuator in bore sizes Ø32 to 125mm with rotation angles of 96°, 186° and 366° and theoretical torque up to 460Nm converts linear motion via a rack and pinion drive to a male or female output shaft.

The P1V-M ATEX certified air motor is available in five different sizes and power ratings of 200, 400, 600, 900 and 1200 Watts. Flange mounted basic grey cast iron motors with planetary gearbox and optional foot bracket.

PRO - PRN hi rotor rotary vane actuator offers a range of 9 sizes in single or double (with double effective torque) vane versions. The PRN High Torque offers angle of 90° 180° and 270° and PRO offers adjustable angle rotation.

The B671 provides force in a reciprocating, rotational motion & is ideal for applications requiring constant torque.  The Hydro-Check option provides controlled feed rates & rotational control with pneumatic power through adjustable hydraulic resistance.

PRN(A) series rotary actuators, available in 9 sizes for torque up to 2549 lb-in @ 100 psi, incorporate a rounded vane design to virtually eliminate seal bypass. A selection of rotation angles and oscillating reference points is available for each model.

PV series rotary actuators, available in 8 sizes for a range of torque up to 1800 lb-in @ 100 psi, are configured as single or double vane. Internal bumpers reduce rotation to 90° or 180°, stroke adjusters adapt the rotation angle to the application.

Compact and stable operation pneumatic rotary actuator.  PRN(A), PRO(A) series

Note: This product is no longer available - please contact us for further assistance.

Nota: Este producto ya no está disponible - por favor, póngase en contacto con nosotros para obtener más ayuda.

La gama completa de accionadores giratorios neumáticos y piezas de Parker se utiliza en una amplia variedad de aplicaciones industriales, de investigación y desarrollo, de laboratorio, de producción y de inspección de la calidad (todas las cuales requieren un movimiento giratorio).  Estos accionadores neumáticos resultan adecuados para cargas de todos los tamaños y pueden montarse y utilizarse en cualquier dirección.  La eficiente gama de accionadores y piezas de Parker permite obtener mejoras en la productividad mediante la automatización de tareas repetitivas.

pneumatic-rotary-actuators

<article class="ph-card-basic">
	<header class="ph-card-basic__header">
		<h2 class="ph-card-basic__title">Consiga su cuenta de Parker hoy mismo!</h2>
	</header>
	<div class="ph-card-basic__body">
		<p>Cree una cuenta para gestionar todo lo que haga con Parker, desde sus preferencias de compra hasta su acceso a la aplicación.</p>
	</div>
	<footer class="ph-card-basic__footer">
		<a href="[registerUrl]" class="button accent-button round-button small-button">Regístrese ahora</a>
	</footer>
</article>

This store is mainly accessed by Brazil users