Heavy Duty Sand Recovery/Vacuum Hose, Series SW409 | Product Series

Crie uma conta para gerenciar tudo o que você faz com a Parker, desde as preferências de compra até o acesso aos equipamentos.

Heavy Duty Sand Recovery/Vacuum Hose, Series SW409

Onde Comprar

Heavy Duty Sand Recovery/Vacuum Hose incorporates a 3/16” thick natural rubber tube and is designed for high pressure transfer of sand and severely abrasive materials in applications to 150°F and 200 psi, Series SW409

Especificações técnicas

Fator de design: 4:1
Temperatura mínima de operação: -40 °C, -40 °F
Material da capa: Styrene Butadiene Rubber (SBR)
Mídia: Wet Abrasive Powders
Especificações atendidas: n/a
Classificação entre vácuo e pressão: 29 inch-Hg, 737 mm-Hg
Peso: 0.19 to 0.73 kg/m, 1.4 to 5.3 lb/ft, 1.41 to 5.30 lb, 0.64 to 2.40 kg
Pressão máxima de operação: 0.7 to 1.4 MPa, 100 to 200 psi, 6.9 to 13.8 bar
Diâmetro nominal interno da mangueira: 50 to 150 mm
Diâmetro interno: 2 to 6 inch, 50.8 to 152.4 mm
Aplicação: Material Handling
Material do reforço da mangueira: 2 Plies of Textile with Dual Wire Helix
Diâmetro externo: 2.750 to 6.813 inch, 69.9 to 173.0 mm
Tipo de pacote: Coil
Material do tubo interno da mangueira: 3/16" Static Dissipative, Black Static Dissipative, Natural Rubber (NR) Static Dissipative
Cor da capa: Black
Estrutura de cobertura: Wrapped
Temperatura máxima de operação: 150 °F, 66 °C
Raio de curvatura mínimo: 6 to 24 inch, 152.4 to 609.6 mm
Comprimento por pacote: 100 ft

Descrição completa do produto

Parker's Series SW409 Heavy Duty Sand Recovery/Vacuum Hose provides superior service across multiple high pressure bulk transfer applications. The thick rubber tube provides additional resistance to sand and other severely abrasive materials going through the hose, and dissipates static electrical charge for operator safety. The cover provides resistance to abrasion and weathering for maximum performance.

Markets:
• Construction
• General Industrial
• Surface Mining

Features/Benefits:
• Tube: Tan 1/4” thick natural rubber for superior abrasion resistance to 150°F.
• Reinforcement: Multiple textile plies for strength and durability, and a wire helix for crush resistance and kink resistance, full suction capability and a path to conduct a static charge to ground.
• Cover: Black SBR for resistance to abrasion, cuts, gouging, scuffs and weathering resistance.

Applications:
- media
• Abrasive materials
• Debris
• Sand
- usage
• Bulk loading/unloading
• Construction sites
• Highway maintenance
• In-plant transfer
• On-site sand clean-up/recovery

Warnings:
• Couplings attached with bands or clamps may reduce the working pressure of the hose assembly to less than the maximum rated working pressure of the hose. Refer to NAHAD Industrial Hose Assembly Guidelines.