Adesivos para Painéis Automotivos

Fusor® 019 bare metal brushable seam sealer is a two-component, acrylic-based seam sealer used for duplicating factory appearance on seams and other applications in which a bare metal, brushable cosmetic seam sealer is required.

Fusor® 100EZ/101EZ adhesive is a two-component, epoxy-based adhesive used for structural and cosmetic repair of auto and heavy duty truck body panels and all types of rigid body plastics.

Fusor® 108B/109B adhesive is a two-component, acrylic-based metal bonding adhesive offering faster cure time than typical panel bonding adhesives.

Fusor® 110B/111B adhesive is a two-component, acrylic-based metal bonding adhesive offering faster cure time than typical panel bonding adhesives.

Fusor® 112B metal bonding adhesive meets OEM specifications for aftermarket metal bonding and weld bonding applications.

Fusor® 114LG adhesive is a two-component, epoxy-based adhesive designed for cosmetic repair of surface imperfections, scratches and pinholes on all plastic bumpers and body panels.

Fusor® 121/124 flexible foam is a two-component, urethane-based foam used for used for sound deadening and sealing/filling of voids in the vehicle where air and wind noise would enter the cabin of the vehicle, along with the gas tank filler area.

Fusor® 122EZ sealer is a two-component, epoxy-based seam sealer used for duplicating factory seams on drip rails, trunks, core support to apron seams, roof seams and quarter panel to rear deck seams.

Fusor® 123/126 sealer is a two-component, urethane-based seam sealer used for duplicating factory appearance on truck bed, tooled door skin, floor pan and core support seams.

Fusor® 123EZ sealer is a two-component, epoxy-based seam sealer used for duplicating factory appearance on truck bed, tooled door skin, floor pan, and core support seams.

Fusor® 123SL sealer is a two-component, urethane-based seam sealer used for duplicating factory appearance on truck bed, tooled door skin, floor pan and core support seams.

Fusor® 127EZ adhesive is a two-component, urethane-based adhesive used for bonding plastic body panels, spoilers and ground effects.

Fusor® 129 controlled flow sealer is a two-component, epoxy-based seam sealer used for duplicating factory appearance on roof channels, door seams, drip rails, trunk seams and truck bed floor seams.

Fusor® 130 rigid foam is a two-component, urethane-based foam used for sound & vibration dampening, reinforcement, and sealing/filling of fender rails, pillars, rocker panels, quarter panels and floors.

Fusor® 132/133 adhesive is a two-component, urethane-based adhesive used for structural and cosmetic repair of bumpers, bumper tabs, and other interior and exterior plastic components.

Fusor® 141/140 adhesive is a two-component, urethane-based adhesive used for structural repair of bumper tabs, headlamps and other interior and exterior plastic components.

Fusor® 142/143 adhesive is a two-component, urethane-based adhesive used for structural and cosmetic repair of bumpers, bumper tabs, and other interior and exterior plastic components.

Fusor® 147 adhesive is a two-component, urethane-based adhesive used for installation and bonding of small body panels, ground effects and headlight buckets.

Fusor® 152 adhesive is a two-component, urethane-based adhesive used for structural and cosmetic repair of bumpers, bumper tabs, and other interior and exterior plastic components.

Fusor® 208B adhesive is a two-component, epoxy-based panel bonding adhesive offering low odor during application and tack-free when cured.

Fusor®  2098 adhesive is a two-component, epoxy-based, structural metal bonding adhesive providing the strength and durability of OEM quality repairs.

Fusor® 2200/2201 sealer/adhesive is a black, two-component urethane adhesive system used to bond FRP, SMC and other plastics with little surface preparation where bond strengths greater than the substrate are desired.

Fusor® 231 sound dampening material is a full-bodied, two-component urethane product used to reduce noise, vibration and harshness (NVH) in all types of dampening applications.

Fusor® 380NS/383NS adhesive is a two-component, rapid-cure epoxy adhesive system used to bond fiberglass reinforced plastics (FRP), sheet molded compounds (SMC) and metals.

Fusor® 800DTM/801DTM/803DTM direct-to-metal sealer is a one-component, moisture-cure product used for duplicating factory appearance on standing seams and cosmetic seams in automotive and industrial repair.

O adesivo para painéis automotivos Fusor lida com colagem, soldagem e rebitagem, além de reparo de plástico, vedação de costura e controle de som para resultados de qualidade OEM.

automotive-and-commercial-vehicle-repair-adhesives

<article class="ph-card-basic">
	<header class="ph-card-basic__header">
		<h2 class="ph-card-basic__title">Faça sua conta da Parker hoje mesmo!</h2>
	</header>
	<div class="ph-card-basic__body">
		<p>Crie uma conta para gerenciar tudo o que você faz com a Parker, desde as preferências de compra até o acesso aos equipamentos.</p>
	</div>
	<footer class="ph-card-basic__footer">
		<a href="[registerUrl]" class="button accent-button round-button small-button">Registre-se agora</a>
	</footer>
</article>

This store is mainly accessed by Brazil users