Capteurs de contrôleur mobile

Advanced True Ground Speed Sensor (ATGSS) belongs to the family of accessories provided to complement electronic control systems. ATGSS determines true ground speed using Doppler beam technology & reports information using a frequency signal.

Parker's Accelerometer and Inclinometer Sensors are MEMs devices with an output voltage dependent on the amount of inertial force applied .  The accelerometers and inclinometers have an inertial range up to ±1.5G.

Les capteurs de pression sont développés pour compléter les systèmes de commande IQAN. Ils forment une gamme de capteurs de pression conçus pour les applications hydrauliques mobiles.

Ces capteurs de température font partie de la famille des accessoires IQAN développés pour compléter les systèmes de commande IQAN. Les capteurs ST forment une gamme de capteurs de température conçus pour les applications hydrauliques mobiles.

Parker's Analog Lever Distance Sensors are Hall Effect devices with an output voltage dependent upon the angular position of a lever arm. They utilize non-contacting technology and provide linear output over one inch (35 degrees) of travel.

Les capteurs TGSS sont développés pour compléter les systèmes de commandes électroniques. Ils déterminent la vitesse réelle au sol à l'aide de la technologie du faisceau radar Doppler et relève les données à l'aide d'un signal de fréquence.

Parker's SCP sensor family is a range of compact pressure sensors for mobile hydraulic applications. The sensors feature compact construction, high linearity and excellent electromagnetic interference resistance.

Parker's Rotary Controls are panel mount Hall Effect devices with an output voltage dependent upon the angular position of it's driver. They have non-contacting electronics and are offered in multiple angular ranges to fit most every application need.

Parker's Rotary Position Sensors are Hall Effect devices with an output voltage dependent upon the angular position of the sensor. They utilize non-contacting technology and are offered in several linear ranges up to 360 degrees of rotation.

Parker's Proximity Sensors use non-contacting technology to detect the presence of a magnet target.  Designed using reed switch technology and potted electronics, they are very robust and well suited for applications where large air gaps are required.

Parker's Ferrous Proximity Sensors use back-biased reed switch technology non-contacting technology to detect the presence of ferrous targets.  Because they are non-contacting with no moving external components they are well suited for many applications.

Parker's GS Gear Speed Sensors provide a sinking output when detecting a ferrous target. They use back-biased, Hall Effect technology for zero speed sensing capability.  Offered in multiple mounting configurations, they are immune to alignment issues.

Parker's RM50 tilt switches detect angular movement in a single axis.  They are designed using reed switch technology and no moving external components making them very robust and well suited for applications where mercury (Hg) cannot be used.

Parker's UTS-ID Universal Tilt Sensor for Impact Detection  communicates impact events and acceleration signals of impact magnitude and acceleration orientation information using SAE J1939 CAN bus protocol.

Parker’s UTS Universal Tilt Sensors with Gyroscope communicate angle of tilt, pitch, and roll information using SAE J1939 CAN bus protocol. They are engineered with MEMs devices for reliability and built to withstand rugged applications.

Parker’s UTS Universal Tilt Sensors communicate angle of tilt, pitch, and roll information using SAE J1939 CAN bus protocol. They are engineered with MEMs devices for reliability and built to withstand rugged applications.

Parker’s CDS-125 is a compact force sensor for ground-engaging machinery, sweeping and clamping applications engineered to withstand the most challenging work environments.

Parker's ATS Angle/Tilt Sensors are Hall Effect devices with an output dependent upon the angular movement in one or two horizontal planes.  Offered in single or dual axis configurations, they are non-contacting and fit most every level application need.

This product is obsolete. Contact your local Parker Representative with any questions. Parker's LS60 is a solid state, dual axis, level sensor designed to limit the amount of tilt during normal operation.

Les contrôleurs de Parker permettent de synchroniser jusqu'à seize axes dans des systèmes électromécaniques, hydrauliques et pneumatiques complets. La gamme comprend des contrôleurs de mouvements autonomes, intégrés aux variateurs ou intégrant les fonctions automate et de carte d'axe dans le même boîtier.

mobile-controller-sensors

<article class="ph-card-basic">
	<header class="ph-card-basic__header">
		<h2 class="ph-card-basic__title">Créez votre compte Parker aujourd'hui !</h2>
	</header>
	<div class="ph-card-basic__body">
		<p>Créez un compte pour gérer tout ce que vous faites avec Parker, de vos préférences shopping à votre accès aux applications.</p>
	</div>
	<footer class="ph-card-basic__footer">
		<a href="[registerUrl]" class="button accent-button round-button small-button">S'enregistrer maintenant</a>
	</footer>
</article>

This store is mainly accessed by Canada users