橡胶热硫化胶粘剂

Chemlok® 2000 primer is a general-purpose primer that bonds a wide variety of vulcanized and unvulcanized rubber compounds to metals and other rigid substrates.

Chemlok® 236X adhesive is a covercoat adhesive that bonds a variety of uncured elastomers to primed metal parts. Chemlok 236X adhesive is recommended for use over Chemlok 205 primer.

Chemlok® 238 (NW) adhesive is a covercoat adhesive used to bond a variety of non-polar elastomers to themselves or to Chemlok 205 primed metals and other rigid substrates. It bonds compounds based on butyl and EPDM, as well as other rubber compounds.

Chemlok® 238 ID adhesive is a covercoat adhesive used to bond a variety of non-polar elastomers to themselves or to Chemlok 205 primed metals and other rigid substrates. It bonds compounds based on butyl and EPDM, as well as other rubber compounds.

Chemlok® 248 thinner is used for diluting or thinning Chemlok 213 adhesive. It is composed of a mixture of solvents.

Chemlok® 259 adhesive is a covercoat adhesive that bonds uncured rubber to metal substrates during the vulcanization of the elastomer. It is recommended for use over Chemlok 207 primer.

Chemlok® 286 tacky tie cement is designed for use over rubber-to-metal adhesives when bonding natural rubber to metal in lining operations. It is suitable for cure by autoclave, open steam or chemical techniques.

Chemlok® 289/290 adhesive is a primer/covercoat adhesive system designed for bonding rubber linings to steel, stainless steel, aluminum, titanium, wood and other substrates. It is suitable for cure by autoclave, open steam or chemical techniques.`

Chemlok® 305-1/310-B Black adhesive is a general purpose, medium viscosity, two-component epoxy adhesive system used for bonding waterworks assemblies.

Chemlok® 320/310-B Black adhesive is a two-component epoxy adhesive system used to bond cured rubber treated with Chemlok 7701 surface treatment. This adhesive system also bonds metals and plastics, both thermosets and thermoplastics.

Chemlok® 402X-HS adhesive is a solvent-based, single-coat adhesive specifically formulated to bond textiles to various unvulcanized elastomers. It is an all-xylene variant of Chemlok 402 adhesive.

Chemlok® 459T primer is designed for promoting adhesion to thermoplastic elastomers (TPE), thermoplastic polyolefins (TPO) and EPDM.

Chemlok® 459X primer is designed for promoting adhesion to TPE, TPO, EPDM and other difficult-to-coat elastomers . It can be used with urethane and epoxy adhesives, as well as with a variety of double-sided tapes.

Chemlok® 481/Curative 44 adhesive two-component adhesive system is used to bond TPEs to metals during the injection molding process. This adhesive system can also be used to fabricate hose for cold and hot [54-65°C (130-150°F)] liquids.

Chemlok® 485/Curative 44 two-component adhesive system is used for insert mold bonding of PVC and Alcryn to substrates such as metal and rubber

Chemlok® 487 A/B two-component adhesive is used to bond TPEs to metals, glass, plastics (both thermoplastic and thermoset) and other elastomers during injection molding. Chemlok 487 adhesive works well for bonding Santoprene, Kraton and Sarlink TPEs.

Chemlok® 489/456 adhesive is a two-component adhesive system designed for bonding PVC to prepared metals, glass and plastics during injection molding.

Chemlok® 5150 solvent-based adhesive is used to bond uncured fluoroelastomers to metal. It can also be used to bond FKM with an incorporated cure system to mechanically prepared metals as well as phosphatized metals used in manufacture of dynamic seals.

Chemlok® 5151 one-coat adhesive is used to bond uncured fluoroelastomers to metal. It can also be used to bond fluoroelastomers to phosphatized metals.

Chemlok® 6016 adhesive is a general purpose adhesive used to bond a variety of elastomers to various metals. It is a non-chlorinated solvent adhesive that can be applied as a one- or two-coat system depending on environmental conditions.

Chemlok® 607 adhesive is a clear one-coat adhesive used to bond unvulcanized silicone rubber to various substrates such as metals, glass, plastics and textiles. It also bonds specialty elastomers and some peroxide-cured elastomers.

Chemlok® 608 adhesive is a one-coat adhesive designed for bonding unvulcanized silicone elastomers to various rigid substrates. It also provides excellent adhesion to a variety of commercially available silicone compounds which require a post cure.

Chemlok® 610 adhesive is a one-coat, water-based adhesive used to bond specialty elastomers to metals and textiles. It can also be used as a coating to protect metals against corrosion.

Chemlok® 6100 adhesive is a covercoat adhesive that bonds a variety of elastomers to various metals. It provides excellent adhesion to mechanically or chemically treated cold rolled steel or aluminum and is highly resistant to salt spray.

Chemlok® 6108 covercoat adhesive is used to bond a variety of elastomers to various metals. It is a non-chlorinated solvent adhesive that provides strong resistance to harsh environments. In some applications, it may be used as a one-coat adhesive.

<p>我们的橡胶热硫化胶粘剂在多个行业中表现出色，应用广泛且可靠。</p>

rubber-to-substrate-adhesives

<article class="ph-card-basic">
	<header class="ph-card-basic__header">
		<h2 class="ph-card-basic__title">立即获取您的派克帐户！</h2>
	</header>
	<div class="ph-card-basic__body">
		<p>无论是购物偏好还是应用小程序，创建一个帐户即可管理所有派克与您相关的内容。</p>
	</div>
	<footer class="ph-card-basic__footer">
		<a href="[registerUrl]" class="button accent-button round-button small-button">立即注册</a>
	</footer>
</article>