Elektricky vodivá těsnění materiálů Form-In-Place

Parker Chomerics CHO-FORM 5575 form-in-place EMI gasket is a moisture cure silicone system with 80 dB shielding effectiveness ideal for corrosion resistance in high temperature applications.

Parker Chomerics CHO-FORM® 5528 form-in-place EMI gasket is a moisture cure silicone system with >70 dB shielding effectiveness while providing a soft, low closure force gasket.

Parker Chomerics CHO-FORM® 5513 form-in-place EMI gasket is a thermal cure silicone system providing >70 dB shielding effectiveness and excellent adhesion to chromate coated aluminum surfaces.

Parker Chomerics CHO-FORM® 5560 form-in-place EMI gasket is a low hardness, thermal cure silicone system with >90 dB shielding effectiveness and excellent galvanic corrosion resistance.

Parker Chomerics CHO-FORM® 5550 form-in-place EMI gasket is a low hardness, thermal cure silicone system with >65 dB shielding effectiveness and good galvanic corrosion resistance.

Parker Chomerics CHO-FORM® 5538 form-in-place EMI gasket is a moisture cure silicone system used in small bead size applications while providing >65 dB shielding effectiveness and good galvanic corrosion resistance.

Parker Chomerics CHO-FORM® 5526 form-in-place EMI gasket is a one-component, moisture cure silicone system with >100 dB shielding effectiveness while providing a soft, low closure force gasket.

Parker Chomerics CHO-FORM® 5541 form-in-place EMI gasket is a thermal cure silicone system with >65 dB shielding effectiveness, good galvanic corrosion resistance and superb adhesion properties.

Parker Chomerics PARPHORM® 1800 non-conductive, moisture cure silicone elastomer is designed for enclosures that require low closure force, excellent adhesion, and very good compression set qualities.

Parker Chomerics PARPHORM® L1938 non-conductive, fluorosilicone material is a thermal cure system specially designed for fluid resistance applications.

Note: This product is no longer available - please refer to the “Product Support" or "Recommended products" section of this page for details on any alternative products, or contact us for further assistance.

Parker Chomerics EMI shielding Form-In-Place gaskets are the superior choice for elastomeric seals, corrosion reisistance, environmental seals, and cost effiective electronic shielding. &nbsp;

electrically-conductive-form-in-place-material-gaskets

<article class="ph-card-basic">
	<header class="ph-card-basic__header">
		<h2 class="ph-card-basic__title">Ještě dnes si založte účet Parker!</h2>
	</header>
	<div class="ph-card-basic__body">
		<p>Vytvořte si jeden účet, pomocí kterého budete moci spravovat veškerou svoji aktivitu v systému Parker, od předvoleb nákupu až po přístup k aplikacím.</p>
	</div>
	<footer class="ph-card-basic__footer">
		<a href="[registerUrl]" class="button accent-button round-button small-button">Registrovat nyní</a>
	</footer>
</article>

This store is mainly accessed by Czech Republic users