Pneuválce

Note: This product is no longer available - please refer to the “Related Products” section of this page for alternative products, or contact us for further assistance.

C0D thrust cylinder with diaphragm pistons are available in single and double acting variants for high force to size ratio applications such as clamping, riveting, punching. Forces up to 12000N.

C0P thrust cylinders are linear actuators for a high force to size ratio. 8 versions including single and double acting, provide forces from 1600 to 25000N (at 6 bar). Suitable for clamping, riveting and punching applications. Strokes up to 100mm.

The P1A actuator in bore sizes Ø10 to Ø25mm is a mini ISO 6432 cylinder for standard temperature -20°C to +80°C and high temperature -10°C to +150°C suitable for lighter duties in the packaging, food and textile industries.

Note: This product is no longer available - please contact us for further assistance.

The C05 actuator is available in double acting bores Ø12 to Ø63mm and C05S in single acting bores Ø8 to Ø63mm. With stainless steel piston rod as standard and corrosion resistant body is suitable for clamping and locking operations.

The P1G actuator in bore sizes Ø6 to Ø16mm is a single acting cartridge cylinder for standard temperature -20°C to +80°C. A nickel plated brass threaded body offers corrosion protection. Suitable for light duty applications.

The P1P actuator in bore sizes Ø20 to Ø100mm is an ISO 21287 compact cylinder for standard temperature -20°C to +80°C with high and low temperature options suitable for processing, packaging and handling applications.

The P1S actuator in bore sizes Ø10 to Ø63 mm is an ISO 6431 / ISO 6432 stainless steel cylinders with standard temperature of -20°C to +80°C and high temperature options.

The P5T actuator in bore sizes Ø16 to Ø100 is a twin guided non rotating rod cylinder for standard temperature -20°C to +80°C. Available with plain or recirculating bearings and suitable for handling and packaging application.

Note: This product is no longer available – please contact us for further assistance.

9109 and SP series air bellows are high thrust single acting actuators with one, two or three convolutions. In bores Ø70 to Ø660mm and strokes 20 to 375mm in standard and high temperature versions for vibration damper applications.

The OSP-L rodless actuator in bore sizes Ø25 to Ø40mm is a linear actuator, guidance and control package designed into a modular system. Ideally suited for point-to point, reciprocating and simple traverse / transfer applications.

The OSP-P rodless actuator in bore sizes Ø10 to Ø80mm is a linear actuator, guidance and control package designed into a modular system. Ideally suited for point-to point, reciprocating and simple traverse / transfer applications.

Constructed of high quality, corrosion-resistant material and available in the widest selection of sizes, strokes and diameters available, Parker pneumatic cylinders, parts and kits offer unrivaled reliability and performance. The range of styles include standard and compact air cylinders, aluminum cylinders, guide cylinders, ISO pneumatic cylinders, low profile pneumatic cylinders, tie rod pneumatic cylinders and stainless steel air cylinders.

pneumatic-cylinders

<article class="ph-card-basic">
	<header class="ph-card-basic__header">
		<h2 class="ph-card-basic__title">Ještě dnes si založte účet Parker!</h2>
	</header>
	<div class="ph-card-basic__body">
		<p>Vytvořte si jeden účet, pomocí kterého budete moci spravovat veškerou svoji aktivitu v systému Parker, od předvoleb nákupu až po přístup k aplikacím.</p>
	</div>
	<footer class="ph-card-basic__footer">
		<a href="[registerUrl]" class="button accent-button round-button small-button">Registrovat nyní</a>
	</footer>
</article>

This store is mainly accessed by Czech Republic users