600 Series Stat-O-Seal® | Product Series

필터 기준:

    선택한 필터 없음

크기

재질-씰

리테이너 재료

최저 작동 온도 (F)

최대 작동 온도 (F)

내경 (inch)

코팅 옵션

지금 Parker 계정을 만들어 보십시오!

계정을 만들면 구매 선호사항에서 애플리케이션 액세스에 이르는 모든 Parker 관련 정보를 관리할 수 있습니다.


LOADING IMAGES
600 Series Stat-O-Seal®

600 Series Stat-O-Seal®

구매처 안내

Parker's Stat-O-Seal® fastener seal designs feature an elastomeric sealing element molded in place within a metal retainer (washer). Stat-O-Seal fasteners are intended to seal immediately under the head of a bolt and conform NAS1523.

기술 사양

  • 열적 활용 유형: Standard, Low, High & Low, High °F
  • 충족된 사양: None, MIL/Aero, MIL/Aero, None, SAE AMS-R-6855, Class 1, Grade 60, SAE AMS 7276
  • 외경: 0.385 to 5.5 inch
  • 중합체 재료 옵션: Nitrile, Silicone, Neoprene, Fluorocarbon, Ethylene Propylene, Butyl, Fluorocarbon Rubber (FKM, FPM)

전체 제품 설명

The Stat-O-Seal® fastener is designed with a pre-calculated interference factor built into the teardrop shaped elastomeric seal. The cross-section free height of the rubber is greater than the metal retainer, providing the proper compression without squeezing the seal beyond its elastic limit.

Stat-O-Seal fasteners are one-piece, molded-in-place seals with the rubber sealing element mechanically and/or chemically bonded to the metal retainer. Parker’s “Splined and Coined” mechanical bonding feature is used on many
600, NAS1523 and 610 series sizes. This feature ensures a positive attachment of the rubber to the retainer, eliminating missing or loose seal elements associated with bonded seals. Stat-O-Seal fasteners are designed to seal beneath the head of the fastener for both internal and external pressure and vacuum systems.

Stat-O-Seal fastener features and benefits include:

     • No machined O-ring grooves are required in the mating flange
     • Precisely controlled optimum percent squeeze eliminates over compression
     • Easy assembly. The self centering design ensures accurate placement of the seal.
     • The retainer edge is visible after installation allowing for easy visual inspection and reducing failures caused by missing seals
     • The solid metal to metal contact improves joint stability and eliminates re-torquing
     • Long reliable service and a high level of reusability
     • Rubber/bolt interference provides for easy assembly

As the fastener is installed into the mating hardware, the elastomer is compressed down to the retainer thickness. The retainer provides a positive alternate load path for fastener torque and forms a protective gland area for the confinement of the seal in a controlled state. Since the elastomer seal cannot move outward, the mass of the seal is forced inward against the shank of the fastener and against the mating surfaces, creating a positive seal. This principle is known as controlled confinement sealing. The diameter of the fastener head should always exceed that of the maximum "E diameter" in order to preserve this principle. (See Related Support Documents for details)


HOW TO ORDER

Use the part configuration tool above to generate the custom part for your application.  Click on “Where to Buy” to find a Distributor in your area, or contact us for assistance.

 

Contact us at the link provided to discuss customized solutions outside standard materials and size ranges shown.

관련 문서

Literature and Reference Materials
Composite Sealing Systems: Products, Markets, Solutions--CSS 5110
FAQs - Finite Element Analysis (FEA)
FAQs - Finite Element Analysis (FEA)
FAQs - Gask-O-Seal®
Sealing A/C systems
Contact & Support Information
Application Data Sheet (ADS)
CSS Directory
CSS Distributor Guide
Frequently Asked Questions
Compliance, Certifications & Safety
CSS Baja I Nadcap Elastomer Seals
CSS San Diego Nadcap Elastomer Seals
Selector Guides
Fastener and Fitting video
×
카탈로그보기
공유 / 이메일
출력
제품 크기 재질-씰 리테이너 재료 최저 작동 온도 (F) 최대 작동 온도 (F) 내경 (inch) 코팅 옵션
600-3130-1 -1 VM720-75 Fluorocarbon 302/304 Stainless Steel, SAE AMS 5513 -20 400 0.988 Passivate Per AMS 2700
600-0102-8 -8 N406-60 Nitrile Low Carbon Steel, ASTM A 109/A 109M -40 225 0.156 Zinc Plated Per ASTM B 633 Type I
600-0102-1 -1 N406-60 Nitrile Low Carbon Steel, ASTM A 109/A 109M -40 225 0.988 Zinc Plated Per ASTM B 633 Type I
600-0102-3/8 -0.375 N406-60 Nitrile Low Carbon Steel, ASTM A 109/A 109M -40 225 0.364 Zinc Plated Per ASTM B 633 Type I
600-0102-5/16 -0.3125 N406-60 Nitrile Low Carbon Steel, ASTM A 109/A 109M -40 225 0.301 Zinc Plated Per ASTM B 633 Type I
600-0102-6 -6 N406-60 Nitrile Low Carbon Steel, ASTM A 109/A 109M -40 225 0.130 Zinc Plated Per ASTM B 633 Type I
600-0102-7/16 -0.4375 N406-60 Nitrile Low Carbon Steel, ASTM A 109/A 109M -40 225 0.427 Zinc Plated Per ASTM B 633 Type I
600-0102-1/2 -0.5 N406-60 Nitrile Low Carbon Steel, ASTM A 109/A 109M -40 225 0.490 Zinc Plated Per ASTM B 633 Type I
600-0102-1/4 -0.25 N406-60 Nitrile Low Carbon Steel, ASTM A 109/A 109M -40 225 0.240 Zinc Plated Per ASTM B 633 Type I
600-0102-1/4 O/S -1/4 O/S N406-60 Nitrile Low Carbon Steel, ASTM A 109/A 109M -40 225 0.245 Zinc Plated Per ASTM B 633 Type I
600-0102-10 -10 N406-60 Nitrile Low Carbon Steel, ASTM A 109/A 109M -40 225 0.180 Zinc Plated Per ASTM B 633 Type I
600-0102-10 O/S -10 O/S N406-60 Nitrile Low Carbon Steel, ASTM A 109/A 109M -40 225 0.186 Zinc Plated Per ASTM B 633 Type I
600-3130-1/2 -0.5 VM720-75 Fluorocarbon 302/304 Stainless Steel, SAE AMS 5513 -20 400 0.490 Passivate Per AMS 2700
600-3130-1/4 -0.25 VM720-75 Fluorocarbon 302/304 Stainless Steel, SAE AMS 5513 -20 400 0.240 Passivate Per AMS 2700
600-3130-1/4 O/S -1/4 O/S VM720-75 Fluorocarbon 302/304 Stainless Steel, SAE AMS 5513 -20 400 0.245 Passivate Per AMS 2700
600-3130-10 -10 VM720-75 Fluorocarbon 302/304 Stainless Steel, SAE AMS 5513 -20 400 0.180 Passivate Per AMS 2700
600-3130-10 O/S -10 O/S VM720-75 Fluorocarbon 302/304 Stainless Steel, SAE AMS 5513 -20 400 0.186 Passivate Per AMS 2700
600-3130-3/8 -0.375 VM720-75 Fluorocarbon 302/304 Stainless Steel, SAE AMS 5513 -20 400 0.364 Passivate Per AMS 2700
600-3130-5/16 -0.3125 VM720-75 Fluorocarbon 302/304 Stainless Steel, SAE AMS 5513 -20 400 0.301 Passivate Per AMS 2700
600-3130-6 -6 VM720-75 Fluorocarbon 302/304 Stainless Steel, SAE AMS 5513 -20 400 0.130 Passivate Per AMS 2700
600-3130-7/16 -0.4375 VM720-75 Fluorocarbon 302/304 Stainless Steel, SAE AMS 5513 -20 400 0.427 Passivate Per AMS 2700
600-3130-8 -8 VM720-75 Fluorocarbon 302/304 Stainless Steel, SAE AMS 5513 -20 400 0.156 Passivate Per AMS 2700
Close [ x ]
Full Screen
687611
687486