• The HarvestClear® Filtration System is ready to plug into your process with preconditioned and sterile manifolds, up to 35% greater filter throughput, providing a complete solution for cell culture harvest
• Walk-away automation of FilterTec® reduces hands-on time
• Ready-to-use, assembled, sterile manifolds with pre-flushed filters
• Four modes of operation: constant pressure, constant rate, manual, R/P Stat Mode, which optimizes filter throughput
• In-line SciPres® pressure sensors coupled with FilterTec® Controller prevent bursting of manifold, preventing possible injury or exposure of the operator to biohazardous materials
• Three filter manifold sizes can handle high density cells from 1-20L
• SciPres® Monitor enables resolution of 0.01 psi
• SciDoc Software for data documentation and analysis
• The system can be connected to an optional WeightStation™ holding a single-use bioprocess container.
HarvestClear® Fluid Handling System (120 V or 220 V) includes the following:
• FilterTec® Controller
• SciPres® Monitor
• 2 x SciPres® Cables
• SciPres® Monitor to Expert Cable
• SciDoc Software
HarvestClear® Filtration Manifolds (3 sizes, purchased separately)
• Pre-flushed PROCLEAR GF 5 µm glass-fibre prefilter
• Pre-flushed PROPOR HC 0.2 µm polyethersulphone high capacity sterilizing-grade membrane filter
• 2 SciPres® pre-calibrated pressure sensors (1" Tri-Clover)
• Set of platinum-cured #17 silicone tubing (1/4" I.D, 3/8" O.D. 36" lead from each end of filter train)
• Luer connectors at each end, with sealing cups; bagged and zip-tied
Application
• Cell Culture Harvest