Adhésifs pour Panneaux Automobiles

Fusor® 019 bare metal brushable seam sealer is a two-component, acrylic-based seam sealer used for duplicating factory appearance on seams and other applications in which a bare metal, brushable cosmetic seam sealer is required.

Fusor® 100EZ/101EZ adhesive is a two-component, epoxy-based adhesive used for structural and cosmetic repair of auto and heavy duty truck body panels and all types of rigid body plastics.

Fusor® 108B/109B adhesive is a two-component, acrylic-based metal bonding adhesive offering faster cure time than typical panel bonding adhesives.

Fusor® 110B/111B adhesive is a two-component, acrylic-based metal bonding adhesive offering faster cure time than typical panel bonding adhesives.

Fusor® 112B metal bonding adhesive meets OEM specifications for aftermarket metal bonding and weld bonding applications.

Fusor® 114LG adhesive is a two-component, epoxy-based adhesive designed for cosmetic repair of surface imperfections, scratches and pinholes on all plastic bumpers and body panels.

Fusor® 121/124 flexible foam is a two-component, urethane-based foam used for used for sound deadening and sealing/filling of voids in the vehicle where air and wind noise would enter the cabin of the vehicle, along with the gas tank filler area.

Fusor® 122EZ sealer is a two-component, epoxy-based seam sealer used for duplicating factory seams on drip rails, trunks, core support to apron seams, roof seams and quarter panel to rear deck seams.

Fusor® 123/126 sealer is a two-component, urethane-based seam sealer used for duplicating factory appearance on truck bed, tooled door skin, floor pan and core support seams.

Fusor® 123EZ sealer is a two-component, epoxy-based seam sealer used for duplicating factory appearance on truck bed, tooled door skin, floor pan, and core support seams.

Fusor® 123SL sealer is a two-component, urethane-based seam sealer used for duplicating factory appearance on truck bed, tooled door skin, floor pan and core support seams.

Fusor® 127EZ adhesive is a two-component, urethane-based adhesive used for bonding plastic body panels, spoilers and ground effects.

Fusor® 129 controlled flow sealer is a two-component, epoxy-based seam sealer used for duplicating factory appearance on roof channels, door seams, drip rails, trunk seams and truck bed floor seams.

Fusor® 130 rigid foam is a two-component, urethane-based foam used for sound & vibration dampening, reinforcement, and sealing/filling of fender rails, pillars, rocker panels, quarter panels and floors.

Fusor® 132/133 adhesive is a two-component, urethane-based adhesive used for structural and cosmetic repair of bumpers, bumper tabs, and other interior and exterior plastic components.

Fusor® 141/140 adhesive is a two-component, urethane-based adhesive used for structural repair of bumper tabs, headlamps and other interior and exterior plastic components.

Fusor® 142/143 adhesive is a two-component, urethane-based adhesive used for structural and cosmetic repair of bumpers, bumper tabs, and other interior and exterior plastic components.

Fusor® 147 adhesive is a two-component, urethane-based adhesive used for installation and bonding of small body panels, ground effects and headlight buckets.

Fusor® 152 adhesive is a two-component, urethane-based adhesive used for structural and cosmetic repair of bumpers, bumper tabs, and other interior and exterior plastic components.

Fusor® 208B adhesive is a two-component, epoxy-based panel bonding adhesive offering low odor during application and tack-free when cured.

Fusor®  2098 adhesive is a two-component, epoxy-based, structural metal bonding adhesive providing the strength and durability of OEM quality repairs.

Fusor® 2200/2201 sealer/adhesive is a black, two-component urethane adhesive system used to bond FRP, SMC and other plastics with little surface preparation where bond strengths greater than the substrate are desired.

Fusor® 231 sound dampening material is a full-bodied, two-component urethane product used to reduce noise, vibration and harshness (NVH) in all types of dampening applications.

Fusor® 380NS/383NS adhesive is a two-component, rapid-cure epoxy adhesive system used to bond fiberglass reinforced plastics (FRP), sheet molded compounds (SMC) and metals.

Fusor® 800DTM/801DTM/803DTM direct-to-metal sealer is a one-component, moisture-cure product used for duplicating factory appearance on standing seams and cosmetic seams in automotive and industrial repair.

L'adhésif pour panneaux automobiles Fusor gère le collage, le soudage et le rivetage, ainsi que la réparation de plastiques, l'étanchéité des joints et le contrôle du son pour des résultats de qualité OEM.

automotive-and-commercial-vehicle-repair-adhesives

<article class="ph-card-basic">
	<header class="ph-card-basic__header">
		<h2 class="ph-card-basic__title">Créez votre compte Parker aujourd'hui !</h2>
	</header>
	<div class="ph-card-basic__body">
		<p>Créez un compte pour gérer tout ce que vous faites avec Parker, de vos préférences shopping à votre accès aux applications.</p>
	</div>
	<footer class="ph-card-basic__footer">
		<a href="[registerUrl]" class="button accent-button round-button small-button">S'enregistrer maintenant</a>
	</footer>
</article>

This store is mainly accessed by Netherlands users