Skaff deg en Parker-konto i dag!
Opprett én konto for å administrere alt du gjør med Parker, alt fra preferanser for handel til applikasjonstilgang.
The maximum number of products that can be compared is 4. Please refine your selection.
Opprett én konto for å administrere alt du gjør med Parker, alt fra preferanser for handel til applikasjonstilgang.
This product is no longer available – please contact us for further assistance.
Parker's proven proportional flow control valves of the series DUR*L06 are used to generate pressure-compensated flow from A to B e. g. for a precise adjustment of tools. The valves are equipped with a built-in check valve for the return flow. For meter-in and meter-out control of an actuator, a rectifier plate can be used.
Markets:
• Industrial
• Machine tools
Features/Benefits:
• Extremely sensitive control of low volume, load-independent flows - movements are precisely executed
• Wide range of different flow rates – enables fine adjustment
• Low hysteresis - allows a sensitive response
• High reproducibility - for reliable operation
• Short delivery time - no warehousing necessary
• Bypass check valve
• Mounting pattern to ISO 6263
• 3 flow rates: 1.6, 6.3, 18.0 liters/minute
Applications:
• Suitable for general hydraulic applications
• Predestined for the use in machine tools
Function
When solenoid current is applied, the metering spool opens against the reset spring and the flow is regulated by the pressure compensating spool to port B.
With the aid of the pressure compensating spool, the pressure drop is held constant on the metering window. Thus pressure load changes are compensated, and the oil flow remains constant.
In combination with the digital electronic module PCD00A-400 the valve parameters can be saved changed and duplicated.
Note
Rectifier plate and suplates see "Accessories" at the end of the attached catalogue PDF file.
| Compliance, Certifications & Safety |
|---|
| CERTIFICATE - DIN ISO 9001:2015 Certificate ISDE |
| CERTIFICATE - Position Paper ISDE 2006/42/EC and EN ISO 13849 |
| Produkter | Flowhastighet | Tetningsmateriale |
|---|---|---|
| DUR1,6L06PK11 | 1.6 L/MIN | FPM |
| HR13022714 | 1.6 L/MIN | NBR |
| DUR18L06PK11 | 18 L/MIN | FPM |
| DUR18L06PKA1 | 18 L/MIN | NBR |
| DUR6,3L06PK11 | 6.3 L/MIN | FPM |
| HR13022578 | 6.3 L/MIN | NBR |
