Filtre, separatorer og rensesystem

PROCLEAR PP liquid filters are ideal for the general pharmaceutical clarification duties. The all polypropylene construction makes these filters especially suited to applications where chemical compatibility could be an issue.

Incorporating a high flow, low binding polyethersulphone (PES) membrane, PROPOR SG 0.2 micron filters offer fast, economical and validated sterile filtration of pharmaceutical liquids.

PROPOR HC high capacity sterilizing grade filters have been specifically designed to extend throughput and capacity preventing premature filter blockage when processing complex pharmaceutical and biologic solutions.

PROPOR BR filters have been specifically designed for the fast and cost-effective bioburden reduction of pharmaceutical solutions.

Incorporating a highly retentive 0.1 micron PES membrane, PROPOR MR filters provide fast and effective removal of mycoplasma from cell culture media.

Parker Velcon DFO Series are designed for removal of granular contaminants from fuel and oils.

The SR series filters are capable of feeding filtered oil under positive pressure to the suction side of the boost pump filtering both open and closed loop oil systems through one filter.

The Parker EPF Series is a highly compact, eco-friendly inline hydraulic oil filter that features a re-usable element core. Capable of flows up to 700 L/min (185 GPM). Maximum allowable operating pressure pressure up to 450 bar (6,500 psi).

The Parker GMF Series is a highly compact, environmentally friendly inline hydraulic oil filter that features a re-usable element core. Capable of flows up to 600 L/min (158 GPM). Maximum allowable operating pressure 70 bar (1,015 psi).

TETPOR PLUS all fluoropolymer filter cartridges have been designed for the filtration of  liquids and gases in aggressive conditions in the bulk pharmaceutical, chemical and biopharmaceutical industries.

PROPOR LR filters have been specifically designed for high flow and effective removal of Ralstonia pickettii and other diminutive organisms.

The IN-AGB Series is a low cost, high performance in-tank mounted return line filter featuring a quick response bypass construction with low hysteresis and a high dirt-holding capacity.

The Racor P510MAM Series Pump and Filter Fuel Polishing System helps extend the life of on-board filters by removing contaminants from stored fuel. It can be used for continuous operation on fuel tanks, or as part of a day-tank transfer system.

Clean Diesel FBO filter assemblies are designed to meet the toughest industrial refueling conditions while providing easy cartridge change outs.

The Racor 700 Series Fuel Filter Water Separator is a two-stage filtration system designed for use in diesel engine applications. Its integrated fuel pump allows for easy system priming and eliminates messy filter pre-filling and engine hard starting.

The DF65 duplex filter has been designed especially for applications where space is limited. The unique design allows the installation of the filter in almost any position. Suitable for a max. flow 800 L/min and a max. pressure of 25 bar.

The 100P Series high pressure in-line filters have been designed so only the end cap of the bowl needs to be removed in order to change the element making it ideal for applications where space is at a premium.

The Parker EAB Series is an eco-friendly reservoir breather / air filter suited for a wide range of hydraulic system applications.  Multiple filter media options available down to 1 micron abs. Designed for airflows up to 1500 L/min (396 GPM).

Parker domnick hunter's BEVPOR MW filter cartridges provide full retentiaon to industry regulated, water contaminating organisms to ensure the microbiological safety of bottled water,  designed for increased process control and operational efficiency.

Parker's BEVPOR PH filter cartridges provide validated microbial retention to industry regulated contaminating organisms. Designed to provide the optimum solution for the microbial stabilization of wine, beer and bottled water.

BEVPOR PS filter cartridges have been specifically designed as a cost-effective solution for microbial stabilization of bottled water, beer stabilization and wine.

BEVPOR WG filters have been designed for the sterilization of process / service water to ensure microbial hazards are controlled within beverage processing applications, particularly aseptic filling operations.

BEVPOR PW filter cartridges have been specifically designed as a cost-effective solution for microbial stabilization of bottled water, beer stabilization and wine microbial stabilization.

Marine FBO filter assemblies are designed to meet the toughest marine and industrial refueling conditions while providing easy cartridge change outs.

Providing a simple, economical and environmental friendly solution for the effective removal of oily condensate from a compressed air system.

filters-collectors-separators-purifiers

<article class="ph-card-basic">
	<header class="ph-card-basic__header">
		<h2 class="ph-card-basic__title">Skaff deg en Parker-konto i dag!</h2>
	</header>
	<div class="ph-card-basic__body">
		<p>Opprett én konto for å administrere alt du gjør med Parker, alt fra preferanser for handel til applikasjonstilgang.</p>
	</div>
	<footer class="ph-card-basic__footer">
		<a href="[registerUrl]" class="button accent-button round-button small-button">Registrer deg nå</a>
	</footer>
</article>

This store is mainly accessed by Norway users