Industrial and Structural Adhesives

LORD® 5801S/61 acrylic adhesive system is specifically formulated to provide high strength in a room-temperature curing adhesive. LORD Accelerator 61 contains a photo initiator, allowing use of UV or visible light to remove surface tack.

LORD® 201 acrylic adhesive when cured with LORD Accelerator 17 or 19 creates an adhesive system that bonds a wide variety of prepared or unprepared metals and plastics. It replaces welding, brazing, riveting and other mechanical fastening methods.

LORD® 204 acrylic adhesive when cured with LORD Accelerator 17 or 19 creates an adhesive system that bonds a wide variety of prepared or unprepared metals and plastics. It replaces welding, brazing, riveting and other mechanical fastening methods.

LORD® 304-1/304-2 epoxy adhesive is a high viscosity adhesive system used for applications that require gap filling or non-sag characteristics on a vertical surface. It provides excellent adhesion to prepared metals and rubber, FRP, phenolic, and wood.

LORD® 305-1/305-2 epoxy adhesive system is used for applications that require strong, durable, chemically and environmentally resistant bonds. Provides excellent adhesion to prepared metals, FRP, phenolic, wood, prepared rubber and other materials.

LORD® 305-1/307-2 epoxy adhesive system is designed for assembling food processing machinery, including gaskets, bushings, shock-absorbing devices and rubber rolls. Also provides excellent adhesion to prepared metals, prepared rubber & other materials.

LORD® 306-1/306-2 epoxy adhesive system is used for applications that require gap filling or non-sag characteristics on a vertical surface. Conforms to military specification MIL-A-24456 for bonding plastic vibration damping tiles to steel.

LORD® 309-1D GB/309-2D epoxy adhesive system is for applications requiring gap filling or non-sag characteristics on vertical surface. Provides excellent adhesion to prepared metals & rubber, FRP, & wood. Glass beads allow control of bondline thickness.

LORD® 310-A/310-B adhesive system is used to bond many types of prepared metals, prepared rubber, urethane and plastics. Also used to bond disk drives, down-hole oil field equipment, automotive body panels and spoilers, and vibration damping mounts.

LORD® 312-A/312-B epoxy adhesive system is used for applications, such as potting encapsulation, requiring an adhesive with good flow characteristics. Provides excellent adhesion to prepared metals, thermosets, wood, prepared rubber and other materials.

LORD® 3170-A/3170-B adhesive is an equal-mix, epoxy structural adhesive system used to bond metals, glass, reinforced plastics, ceramics and foam materials for cryogenic applications.

LORD® 320/310-B Black epoxy adhesive system is used to bond cured rubber treated with LORD 7701 adhesion enhancer/surface modifier. It also bonds metals and plastics, both thermosets and thermoplastics.

LORD® 320/310-B epoxy adhesive system is used to bond cured rubber treated with LORD 7701 adhesion enhancer/surface modifier. It also bonds metals and plastics, both thermosets and thermoplastics.

LORD® 320/322 epoxy adhesive system is formulated for primerless adhesion to SMC. Also provides excellent adhesion to prepared metals, rubber, FRP, polyester thermosets and thermoplastics, and many other materials.

LORD® 320/323 epoxy adhesive system is formulated for primerless adhesion to SMC. Also provides excellent adhesion to prepared metals, rubber, FRP, polyester thermosets and thermoplastics. Adhesive fluoresces bright blue when exposed to UV light source.

LORD® 360-A/360-B adhesive is an equal-mix, epoxy adhesive system used in applications requiring rapid cure at room temperature.

LORD® 363-A/363-B adhesive is a fast set, epoxy adhesive system used to bond scuffed sheet molded compounds (SMC), wood, fiberglass reinforced plastics (FRP) and other plastics.

LORD® 403 acrylic adhesive in combination with LORD Accelerator 17, 19 or 19GB replaces welding, brazing, riveting & other mechanical fastening methods. It performs well in low-temperature applications that are subject to high impact or high peel loads.

LORD® 406 acrylic adhesive in combination with LORD Accelerator 17, 19 or 19GB replaces welding, brazing, riveting & other mechanical fastening methods. It performs well in low-temperature applications that are subject to high impact or high peel loads.

LORD® 410 acrylic adhesive in combination with LORD Accelerator 17, 19 or 19GB replaces welding, brazing, riveting & other mechanical fastening methods. It performs well in low-temperature applications that are subject to high impact or high peel loads.

LORD® 459X adhesion enhancer/surface modifier is a primer in xylene solvent used for promoting adhesion to TPEs, TPOs & EPDM in conjunction with LORD acrylic, urethane, and epoxy structural adhesives, as well as with a variety of double-sided tapes.

LORD® 506 acrylic adhesive when cured with LORD Accelerator 17 or 19 creates a semi-flexible adhesive system that will quickly bond a wide variety of thermoplastics and thermoset plastics.

LORD® 5206/55GB acrylic adhesive system replaces mechanical fastening methods especially over a wide range of temperature environments subject to high impact or high peel loads. Contains glass beads that allow precise control of bondline thickness.

LORD® 606/6GB adhesive system creates strong bonds with excellent surface cure & minimal surface preparation. Fast-setting system bonds composites including DCPD resin & DCPD-based FRP and contains glass beads for precise control of bondline thickness.

LORD® 661/6GB acrylic adhesive system bonds composites including DCPD resin & DCPD-based FRP and contains glass beads for control of bondline thickness. It creates exceptionally strong bonds with excellent surface cure and minimal surface preparation.

<p>With the ability to bond to a variety of substrates including bare metal, painted metal, composite, rubber-to-substrate, and more, these adhesives are suitable for a variety of applications.</p>

industrial-and-structural-adhesives

<article class="ph-card-basic">
	<header class="ph-card-basic__header">
		<h2 class="ph-card-basic__title">Skaff deg en Parker-konto i dag!</h2>
	</header>
	<div class="ph-card-basic__body">
		<p>Opprett én konto for å administrere alt du gjør med Parker, alt fra preferanser for handel til applikasjonstilgang.</p>
	</div>
	<footer class="ph-card-basic__footer">
		<a href="[registerUrl]" class="button accent-button round-button small-button">Registrer deg nå</a>
	</footer>
</article>

This store is mainly accessed by Norway users