Pneumatiske sylindere

The OSP-P rodless actuator in bore sizes Ø10 to Ø80mm is a linear actuator, guidance and control package designed into a modular system. Ideally suited for point-to point, reciprocating and simple traverse / transfer applications.

The P1P actuator in bore sizes Ø20 to Ø100mm is an ISO 21287 compact cylinder for standard temperature -20°C to +80°C with high and low temperature options suitable for processing, packaging and handling applications.

The VB actuator is a single acting pneumatic clamp cylinder with built in oleo pneumatic intensifier producing a force up to 2100 daN. Compact and easy to install for clamping, holding and riveting applications.

C0D thrust cylinder with diaphragm pistons are available in single and double acting variants for high force to size ratio applications such as clamping, riveting, punching. Forces up to 12000N.

The C05 actuator is available in double acting bores Ø12 to Ø63mm and C05S in single acting bores Ø8 to Ø63mm. With stainless steel piston rod as standard and corrosion resistant body is suitable for clamping and locking operations.

C0P thrust cylinders are linear actuators for a high force to size ratio. 8 versions including single and double acting, provide forces from 1600 to 25000N (at 6 bar). Suitable for clamping, riveting and punching applications. Strokes up to 100mm.

The P1G actuator in bore sizes Ø6 to Ø16mm is a single acting cartridge cylinder for standard temperature -20°C to +80°C. A nickel plated brass threaded body offers corrosion protection. Suitable for light duty applications.

The P1A actuator in bore sizes Ø10 to Ø25mm is a mini ISO 6432 cylinder for standard temperature -20°C to +80°C and high temperature -10°C to +150°C suitable for lighter duties in the packaging, food and textile industries.

The P1S actuator in bore sizes Ø10 to Ø63 mm is an ISO 6431 / ISO 6432 stainless steel cylinders with standard temperature of -20°C to +80°C and high temperature options.

The R Series actuator in bores Ø32 to Ø63mm is an aluminium round cylinder for standard temperature -10°C to +70°C. Lightweight and available with pneumatic cushioning providing an economical package for a variety of applications.

The P5T actuator in bore sizes Ø16 to Ø100 is a twin guided non rotating rod cylinder for standard temperature -20°C to +80°C. Available with plain or recirculating bearings and suitable for handling and packaging application.

9109 and SP series air bellows are high thrust single acting actuators with one, two or three convolutions. In bores Ø70 to Ø660mm and strokes 20 to 375mm in standard and high temperature versions for vibration damper applications.

The OSP-L rodless actuator in bore sizes Ø25 to Ø40mm is a linear actuator, guidance and control package designed into a modular system. Ideally suited for point-to point, reciprocating and simple traverse / transfer applications.

18 bar Heavy Duty Pneumatic Cylinders conforming to ANSI and NFPA. The tie rod construction sets the standard for performance, durability and trouble-free operation with superior design and quality to ensure long cylinder service life.

The P1F Series in bore sizes Ø32 to 125mm is an ISO 15552 pneumatic cylinder suitable for standard, low & high temperatures. With various piston rod materials and wiper/rod sealing options for a wide range of applications. Strokes up to 2500 mm.

The P1F-T Series in bore sizes Ø32 to 125mm is an ISO 15552 Tie-Rod pneumatic cylinder suitable for standard, low & high temperatures. With various piston rod materials and rod sealing options for a wide range of applications. Strokes up to 2500 mm.

P1F-S Series ISO 15552 pneumatic actuators are suitable for low, normal & high temperatures. With various piston rod material and wiper sealing options, bore sizes Ø32 to 125mm and strokes up to 2000mm.

Series 2AP and Series 2ANP heavy duty steel pneumatic cylinders with Rod Lock prevent rod movement upon release of stored energy. They are rated for air service to 100 psi and can hold loads in excess of 5,000 lb., depending on bore size.

The P1F-T actuator in bore sizes Ø160 to 320mm is an ISO 15552 magnetic tie rod cylinder for standard temperature -20 to +80°C. The P1F-T has corrosion resistant materials and is suitable for heavy duty applications. Strokes up to 2000mm.

The P1F Series in bore sizes Ø32 to 100mm is a range of twin rods pneumatic cylinders suitable for use in non rotating applications like for handling and packaging.

The RDV series double acting, twin rod, non rotate, pneumatic linear actuators in bores Ø25 mm with adjustable pneumatic cushioning and magnetic piston for handling and packaging applications.

Note: This product is no longer available - please refer to the “Related Products” section of this page for alternative products, or contact us for further assistance.

Note: This product is no longer available - please contact us for further assistance.

Parkers pneumatiske sylindre, deler og sett tilbyr uovertruffen pålitelighet og ytelse da de består av et korrosjonsresistent materiale av høy kvalitet og er tilgjengelig i en lang rekke størrelser, slaglengder og diametre. Stilutvalget inkluderer standard og kompakte luftsylindre, aluminiumsylindre, veiledersylindre, pneumatiske ISO-sylindre, pneumatiske sylindre med lav profil, pneumatiske trekkstangsylindre og luftsylindre i rustfritt stål.

pneumatic-cylinders

<article class="ph-card-basic">
	<header class="ph-card-basic__header">
		<h2 class="ph-card-basic__title">Skaff deg en Parker-konto i dag!</h2>
	</header>
	<div class="ph-card-basic__body">
		<p>Opprett én konto for å administrere alt du gjør med Parker, alt fra preferanser for handel til applikasjonstilgang.</p>
	</div>
	<footer class="ph-card-basic__footer">
		<a href="[registerUrl]" class="button accent-button round-button small-button">Registrer deg nå</a>
	</footer>
</article>

This store is mainly accessed by Norway users