Series II Standard Mass Flow Controller

Konfigurera

Köp här

Our Series II mass flow controllers & meters offer outstanding value in a wide range of applications. Exceptional accuracy for flow ranges from 0.014 sccm to 1,670 slpm, all with optional multi-gas and multi-range capability for maximum flexibility.

Tekniska specifikationer

Flödeshastighet: Up to 1670 L/min
Tryckreglering, intervall: 928 PSIA - 1450 PSIA
Anslutningstyp: Compression, Face Seal Male, None, Other
Anslutningsstorlek: 1/8"-1/2" | 6 mm - 20 mm
Gränssnitt för kommunikation: Analog or digital: RS-232, DeviceNet, Profibus-DP, Modbus-RTU
Ventiltyp: Normally Open, Normally Closed
Tätningsmaterial: EPDM, Kalrez, Viton (Standard)
Stommaterial: 316L Stainless Steel
Flödeshastighet, precision: Standard: ± 0.5% Reading plus ± 0.1% Full Scale (± 1% Full Scale for ranges 3 - 5 ml/min; ± 2% Full Scale for ranges < 3 ml/min)
Turndown-förhållande: 1 : 50 (in digital mode up to 1 : 187.5)
Upprepningsbarhet: < 0.2% reading
Fällningstid: Standard: 2 - 4 seconds
Styrstabilitet: < ±0.1% Full Scale (typical for 1 l/min N2)
Maximal arbetstemperatur: 70 °C
Lägsta driftstemperatur: -10 °C
Temperaturkoefficient: Zero: < 0.05% Full Scale / °C; span: < 0.05% Reading / °C °C
Tryckkoefficient: 0.1 ATM typical N2; 0.01% / ATM typical H2 ATM
Läckagehastighet: Tested < 2 x 10-9 mbar l/s He L/sec
Attitydkänslighet: Max. error at 90° off horizontal 0.2% at 1 ATM, typical N2
Uppvärmningstid: 30 min. for optimum accuracy 2 min. for accuracy ±2% Full Scale
Vått material: 316L Stainless Steel
Ytfinhet: 0.8 µm typical
Anslutningsmaterial: 316L Stainless Steel
Uppfyllda specifikationer: IP40
Strömförsörjning, spänning: +15 - 24 Vdc
Energiförbrukning: Max. 320 mA; Add 50 mA Profibus, if applicable
Elektrisk anslutning: 9-PIN D-Connector

Safety Warning

Fullständig produktbeskrivning

Parker's highly precise mass flow controllers provide you the diagnostic stability and repeatability you need for low flow gas applications. Controlling thermal mass flow rates from 0.6 l/m to 1,670 l/m with high precision and <0.2% repeatability. Rated for 8 separate gas types which are customer field adjustable. Our thermal mass flow controller is available in both digital and analog styles, fully compatible with RS232 and digital protocols such as Profibus. If you're not sure what gas you're going to use or your process changes, our MFC allows you to migrate to a new gas within your flow range without purchasing a new mass flow controller.

Markets:
• Laboratory and Process Instrumentation
• Pharma/Bio-Pharma Equipment
• Air Quality Monitoring System
• Furnace and Coatings

Features/Benefits:
• Fast, Repeatable and Reliable Performance
• Premium Accuracy with Proven Thermal Mass Flow Sensor and Laminar Flow Element
• Easy to integrate into your new or existing systems
• Asset calibration management software included
• Cleaned for analytical use
• Fails shut with Normally Closed Valve for safe operation
• CE, REACH and RoHS II

Applications:
• Gas Control for Laboratory and Process Equipment
• Burner Ratio Control for Ceramics and Metals
• Process and Environmental Analyzers
• Emissions Monitors and Calibrators

Relaterade dokument

Literature and Reference Materials
Model 610CV Series II Mass Flow Controller
MFM_MFC Analog Series 100_200
Mode 600CV Mass Flow Controller
Model 600CV Mass Flow Controller
Model 601AV Mass Flow Controller
Model 601CV Mass Flow Controller
Model 601CV Series II Mass Flow Controller
Model 602AV Mass Flow Controller
Model 602AV Mass Flow Controllers
Model 603AV Mass Flow Controller
Model 611AV Series II Mass Flow Controller
Model 611CV Series II Mass Flow Controller
Model 612AV Series II Mass Flow Controller
Model 613AV Series II Mass Flow Controller
Overview Brochure for Series II Mass Flow Meters and Controllers

Series II Standard Mass Flow Controller | Product Series

Skaffa ditt Parker-konto idag!

Series II Standard Mass Flow Controller

Tekniska specifikationer

Fullständig produktbeskrivning

Relaterade dokument