İğne Valfler

Parker'ın V Serisi İğne Valfleri akışkanlarda ve gazlarda etkili, sızdırmaz bir kapanma ve regülasyon sağlayacak şekilde tasarlanmıştır. Bu valfler 5000 psi'ye kadar basınçlarda enstrümantasyon ve genel amaçlı uygulamalara yöneliktir.

Parker's union bonnet needle valves, U Series have been engineered for use in high pressure and high temperature instrumentation and industrial applications. These severe service needle valves have packing below the threads to protect the valve stem

Parker Autoclave's SM Series needle valves are a non-rotating rising stem design, with working pressures to 20,000 psi (1379 bar). Tubing sizes range from 1/4" to 1-1/2".The valve connections utilize the Parker Autoclave coned and threaded design.

Parker offers standard needle valves and needle valves with a reverse free-flow check. Parker’s needle valves are non-compensated adjustable orifices capable of flows up to 225 lpm (60 gpm) and pressures as high as 420 bar (6000 psi).

Parker TN series needle valve with high performance and various connections available to users for a wide variety of markets, industries and applications. For use at pressure up to 6,000psi (414 bar) and temperature up to 1,000°F (538 °C).

Parker Legris compact needle valves can be installed in any system and are designed for applications requiring accurate leak-free fluid control and excellent service life.

Parker’s Colorflow MVI series is a cartridge-type metering valve that meters flow in both directions.

Parker's Colorflow N series  hydraulic flow control, in-line needle valves meters flow in both directions or provides a reliable shut off. This needle valve flow control is used in air and oil applications and has standard and fine metering options.

Parker’s Colorflow MV series valves is a high precision adjust needle valve that meters flow in both directions.

Parker's bar stock rising plug hand valves with soft seat tip and a straight through flow path, specifically designed for isolation and regulation of contaminated media. Pressure rating up to 10,000 psi (689 bar).

Parker Autoclave's P Series needle valves offer a diverse line of pipe valves for small bore instrumentation applications in the oil and gas processing industry. These are rated to 15,000 psi (1034 bar) with sizes ranging from 1/4" to 1" pipe.

Parker'ın MAN Serisi MPI İğne Valfleri, zorlu uygulamalarda daha yüksek bir performans için dişli tasarımın altında conta içerir.

Parker Autoclave’s 20DBNV Series is a three valve block and bleed compact system that is designed for blocking, bleeding, and calibration of instrumentation systems. This valve is a non-rotating rising stem design, rated to 20,000 psi (1379 bar).

Parker Autoclave's SW Series needle valves are a non-rotating rising stem design, with working pressures to 15,000 psi (1034 bar). These high flow valves are available in 316 Stainless Steel and utilize the Speed Bite single ferrule connection.

Parker Autoclave'ın Y Serisi boyunduruk valfleri, endüstriyel uygulamalar ve önemli hizmet uygulamaları için çok yoğun çalışma şartlarına uygun, tesis sınıfı valflerdir.

Parker’ın çok portlu ölçüm valfleri, 6000 psig (414 bar) ve 10.000 psig'ye (689 bar) kadar basınçlarda çalışma üzere amaca yönelik tasarlanmış valflerdir.

Parker Autoclave's QS Series low pressure needle valves are rated for operation up to 15,000 PSI (1034 bar). The bar stock valve has a non-rotating rising stem design to prevent galling in severe service applications.

Parker Autoclave's 150V Series needle valves are a non-rotating rising stem design, with working pressures to 150,000 psi ( 10350 bar) with 5/16” ” end connections. These valves are a cylindrical body of high strength 15-5PH Stainless Steel.

Dış vida ve boyunduruklu konik model iğne valfler özellikle 6000 psi’ye (414 bar) kadar olan uygulamaların izolasyonu için tasarlanmıştır.

Parker Autoclave’s FCNV Series needle valve is specifically designed to interface with the FCC Flared Cone Connection to 22,500 psi (1,550 bar). The needle valves are available to connect with 1/4" to 1” O.D. Parker Autoclave tube sizes.

Parker'ın H Serisi dağıtım manifoldu ünitesi, kolay çalışma ve etkili, sızdırmaz bir kapanma için PTFE rakor contalı, 5 veya 10 metal yuvalı iğne valf seçeneği ve "H" serisi kafa aksamları sunar.

Parker’ın 20.000 PSI H-Serisi iğne valfi, 20.000 psi (1.379 bar) sınıfına kadar olan tüm akışkanlarla çalışması amacıyla tasarlandı.

Parker YG series valves are Y pattern globe valves that are widely used in the power industry, petroleum,and chemical/petrochemical industries. With a maximum operating pressure of 414bar(6,000psi) and a maximum operating temperature of 676℃(1,250°F).

Parker's bar stock gauge valves with single vent, designed for safe isolation and control of flow to pressure measuring devices and venting or draining of trapped process media. Available in pressure ratings up to 6,000 psi and 10,000 psi.

Düşük debili kritik uygulamalarda izolasyon ve debi düzenlemesi için tasarlanmış Parker çubuk kollu el vanaları. 6.000 psi (414 bar) ve 10.000 psi'ye (689 bar) kadar basınç değerlerinde düz (HNV) ve açılı (HNAV) stillerde mevcuttur.

Parker, pozitif sızdırmazlık kapatma ve sıvı ve gazların regülasyonu için çeşitli gövde tiplerinde hem hat içi hem de açılı şekillerde iğne valfler sunmaktadır. Agresif kimyasal ve gaz uygulamaları için PFA ürünü yanında, petrol ve gaz işleme tesisleri için birçok tasarım sunulmaktadır.

needle-valves

<article class="ph-card-basic">
	<header class="ph-card-basic__header">
		<h2 class="ph-card-basic__title">Parker hesabınızı hemen bugün edinin.</h2>
	</header>
	<div class="ph-card-basic__body">
		<p>Alışveriş tercihlerinizden uygulama erişimine kadar Parker ile ilgili yaptığınız her şeyi yönetmek için bir hesap oluşturun.</p>
	</div>
	<footer class="ph-card-basic__footer">
		<a href="[registerUrl]" class="button accent-button round-button small-button">Şimdi Kaydolun</a>
	</footer>
</article>

This store is mainly accessed by Turkey users