Ethylene Propylene 80 Durometer O-Ring, General Purpose , Purple (E0893-80) | Parker NA
687519
687519

Ethylene Propylene 80 Durometer O-Ring, General Purpose , Purple (E0893-80)

Parker's ethylene propylene rubber (EPM, EPR, EPDM) O-rings are compatible with solvents and other chemicals.

Use our configurator to build the right part for your application.
Description
    E0893-80 is colored purple, to differentiate this seal material from black O-rings.

    • Heat resistance — Up to 121°C (250°F)
    • Cold flexibility — Down to approximately -57°C (-70°F)

    Chemical resistance
    • Hot water and steam
    • Glycol based brake fluids (Dot 3 & 4) and silicone-based brake fluids (Dot 5)
    • Many organic and inorganic acids
    • Cleaning agents, sodium and potassium alkalis
    • Phosphate-ester based hydraulic fluids (HFD-R)
    • Silicone oil and grease
    • Many polar solvents (alcohols, ketones, esters)
    • Ozone, aging and weather resistant

    Not compatible with:
    • Mineral oil products (oils, greases and fuels)

    Used for General Purpose

    *Custom sizes and coatings/markings are available upon request. Contact Parker O-Ring Division at 859-269-2351 for design and pricing assistance.
Description

Performance Characteristics

Inside Diameter

0.029 to 25.940 inch

Width

0.04 to 0.275 inch

Polymer Material Options

Ethylene Propylene Rubber (EPM, EPR, EPDM)

Thermal Application Type

Low Temperature (< -30°F)

Minimum Operating Temperature

-70 °F

Durometer

80 Shore A

Maximum Operating Temperature

250 °F

For Fluid Type

Water
Steam

Industry

General

Specifications Met

None

Region of Origin

North America

Internally Lubricated

No

Color

Purple

FAILURE OR IMPROPER SELECTION OR IMPROPER USE OF THE PRODUCTS DESCRIBED HEREIN OR RELATED ITEMS CAN CAUSE DEATH, PERSONAL INJURY AND PROPERTY DAMAGE. This document and other information from Parker-Hannifin Corporation, its subsidiaries and authorized distributors provide product or system options for further investigation by users having technical expertise. The user, through its own analysis and testing, is solely responsible for making the final selection of the system and components and assuring that all performance, endurance, maintenance, safety and warning requirements of the application are met. The user must analyze all aspects of the application, follow applicable industry standards, and follow the information concerning the product in the current product catalog and in any other materials provided from Parker or its subsidiaries or authorized distributors. To the extent that Parker or its subsidiaries or authorized distributors provide component or system options based upon data or specifications provided by the user, the user is responsible for determining that such data and specifications are suitable and sufficient for all applications and reasonably foreseeable uses of the components or systems...

contact us