General Purpose Barium Grease Lubricant, Hydrocarbon Service and Pneumatic Systems Under 200 psi, Translucent (O-lube) | Parker NA
687519
687519

General Purpose Barium Grease Lubricant, Hydrocarbon Service and Pneumatic Systems Under 200 psi, Translucent (O-lube)

Email Print
Parker's O-Lube is an outstanding general purpose grease lubricant. It is intended for use with seals that perform in hydrocarbon service. It can also be used in pneumatic service.

Parker's O-Lube is an outstanding general purpose grease lubricant. It is intended for use with seals that perform in hydrocarbon service. It can also be used in pneumatic service.

Select attributes to refine your product search.
Reset Attributes
Description
    Parker’s O-lube is a barium base petroleum grease that prolongs the life of synthetic rubber seals. It offers excellent surface adherence and lubrication with inherent water resistance. It is recommended for low-pressure pneumatic systems, as well as reciprocating and low-speed oscillating or rotary applications. Parker O-Lube works well in a –20°F to +180°F temperature range. It is not recommended for silicone, butyl, or ethylene propylene rubber seals, or for use in systems with micronic filters.

    • Heat resistance – up to 82°C (180°F)
    • Cold flexibility – Down to -29°C (-20°F)
    • All-purpose
    • Excellent surface adherence
    • Water resistant

    Compatible with:
    • Epichlorohydrin
    • Fluorocarbon
    • Fluorosilicone
    • HiFluor
    • HNBR
    • Neoprene
    • Nitrile
    • Perfluoroelastomer
    • Polyacrylate
    • Polysulfide
    • Polyurethane

    Not Recommended for:
    • Use with silicone, buytl, or ethylene propylene rubber seals
    • Systems with micronic filters


    *There are special situations that may exist where one of the Parker lubricants would not be the best recommendation. For guidance in handling these unique situations, consult a Parker Applications Engineer via our online chat feature or email ordmailbox@parker.com

    **Custom sizes and coatings/markings are available upon request. Contact Parker O-Ring Division at 859-269-2351 for design and pricing assistance.

Description

Performance Characteristics

Inside Diameter

Various inch

Width

Various

Polymer Material Options

-

Thermal Application Type

Low Temperature (< -30°F)

Minimum Operating Temperature

-20 °F

Durometer

n/a

Maximum Operating Temperature

180 °F

For Fluid Type

-

Industry

General

Specifications Met

-

Region of Origin

North America

Internally Lubricated

-

Color

Translucent

FAILURE OR IMPROPER SELECTION OR IMPROPER USE OF THE PRODUCTS DESCRIBED HEREIN OR RELATED ITEMS CAN CAUSE DEATH, PERSONAL INJURY AND PROPERTY DAMAGE. This document and other information from Parker-Hannifin Corporation, its subsidiaries and authorized distributors provide product or system options for further investigation by users having technical expertise. The user, through its own analysis and testing, is solely responsible for making the final selection of the system and components and assuring that all performance, endurance, maintenance, safety and warning requirements of the application are met. The user must analyze all aspects of the application, follow applicable industry standards, and follow the information concerning the product in the current product catalog and in any other materials provided from Parker or its subsidiaries or authorized distributors. To the extent that Parker or its subsidiaries or authorized distributors provide component or system options based upon data or specifications provided by the user, the user is responsible for determining that such data and specifications are suitable and sufficient for all applications and reasonably foreseeable uses of the components or systems...

contact us
Close [ x ]
Full Screen