Silicone 60 Durometer O-Ring, Rust , Food and Medical (S0317-60) | Parker NA
687519
687519

Silicone 60 Durometer O-Ring, Rust , Food and Medical (S0317-60)

Parker's silicone (VMQ) O-rings are very compatible with PFPE, cold water, and ozone.

Use our configurator to build the right part for your application.
Description
    Parker's Silicone 70 Durometer O-Ring, General Purpose, Rust (S0317-60).   Silicones have good ozone and weather resistance as well as good insulating and physiologically neutral properties as a whole.  S0317 has been tested to the extraction process of FDA, as well as being made of approved ingredients.  In addition, S0317 meets the requirements of USP Class VI.  Used across many application, however S0317 is an excellent 60 durometer silicicon for  Life Science and Consumer Product Markets.

    Certifications include FDA, USDA, USP Class VI

    • Heat resistance — Up to approximately 232°C (450°F)
    • Cold flexibility —  Down to approximately -75°C (-103°F)

    Chemical resistance
    • Animal and vegetable oil and grease
    • High molecular weight chlorinated aromatic hydrocarbons (including flame-resistant insulators, and coolant for transformers)
    • Moderate water resistance
    • Diluted salt solutions
    • Ozone, aging and weather

    Not compatible with:
    • Steam
    • Acids and alkalis
    • Low molecular weight chlorinated hydrocarbons (trichloroethylene)
    • Hydrocarbon based fuels
    +C13• Aromatic hydrocarbons (benzene, toluene)
    • Low molecular weight silicone oils

    *Custom sizes and coatings/markings are available upon request. Contact Parker O-Ring Division at 859-269-2351 for design and pricing assistance.
Description

Performance Characteristics

Inside Diameter

0.029 to 25.940 inch

Width

0.04 to 0.275 inch

Polymer Material Options

Silicone Rubber (VMQ, PVMQ)

Thermal Application Type

Low and High Temperature (< -30°F, > 250°F)

Minimum Operating Temperature

-103 °F

Durometer

60 Shore A

Maximum Operating Temperature

450 °F

For Fluid Type

General / Other

Industry

General

Specifications Met

Food
Medical
FDA
USDA
USPCLASSVI

Region of Origin

North America

Internally Lubricated

No

Color

Rust

FAILURE OR IMPROPER SELECTION OR IMPROPER USE OF THE PRODUCTS DESCRIBED HEREIN OR RELATED ITEMS CAN CAUSE DEATH, PERSONAL INJURY AND PROPERTY DAMAGE. This document and other information from Parker-Hannifin Corporation, its subsidiaries and authorized distributors provide product or system options for further investigation by users having technical expertise. The user, through its own analysis and testing, is solely responsible for making the final selection of the system and components and assuring that all performance, endurance, maintenance, safety and warning requirements of the application are met. The user must analyze all aspects of the application, follow applicable industry standards, and follow the information concerning the product in the current product catalog and in any other materials provided from Parker or its subsidiaries or authorized distributors. To the extent that Parker or its subsidiaries or authorized distributors provide component or system options based upon data or specifications provided by the user, the user is responsible for determining that such data and specifications are suitable and sufficient for all applications and reasonably foreseeable uses of the components or systems...

contact us