Příslušenství úpravných jednotek vzduchu

Global FRL soft start/dump valve product offering includes individual soft start or dump valves or combined soft start/dump valves.

P3XD is a 62mm 3-way, 2-position valve, automatically dumps downstream pressure on loss of pilot signal, 1/2",3/4" BSPP (NPT 1/2") port. Max pressure of 10 bar (solenoid). Temp -10°C to 60°C.

P3XT is a 62mm 3-way, 2-position valve, automatically dumps downstream pressure on loss of pilot signal, adjustable slow start, 1/2",3/4" BSPP (NPT 1/2") port. Max pressure of 16 bar (30mm coil solenoid). Temp -10°C to 60°C.

P3Y Global Soft Start Valves offer a combined soft start/quick dump or soft start only option that provides safe introduction of pressure to a machine or system.

The P33 Safety Exhaust valve is designed to safely remove trapped air from the machine during a faulted or e-stop condition. This product is externally monitored and designed for two channel safety architecture up to Category 4, Performance level e.

P4Q quick exhaust valves provide rapid exhaust of cylinder exhaust and increase cylinder stroke speeds. Diaphragm materials are available in Nitrile and Viton to meet a wide variety of temperature and pressure operating conditions.

Aluminium bodied in-line non-return valve.

Allows to provide a single pneumatic signal coming from two different sources, making a "Logic OR" between these two sources.

VQB flow control valves are available as By-pass or Bi-directional control options. Robust metal design, easy precise adjustment and maximum 10 bar rating.

Banjo sockets for plug-in sensors and designed to accept (piggy backed) other functional fittings such as flow controls and blocking valves.

The plug in PWS sensors with pneumatic, electric or electronic outputs monitor back pressure on a cylinder exhaust to provide cylinder status signals.

Stainless Steel constructed design to restrict and silence exhausted air. Screwdriver adjustment allows simple control of cylinder speeds.

The 337 series flow control valve adjustment knob features a numerical micrometer position for visual indication, and includes a fine taper needle which provides precise flow control even at low flow rates.

0R quick exhaust valves provide rapid exhaust of cylinder exhaust and increase cylinder stroke speeds. Diaphragm materials are available in Urethane, Nitrile, Fluorocarbon, and PTFE to meet a wide variety of temperature and pressure operating conditions.

06T modular compact dump valve automatically shuts upstream pressure and exhausts the downstream pressure when the pilot pressure is released.

07T modular standard dump valve automatically shuts upstream pressure and exhausts the downstream pressure when the pilot pressure is released.

The blocking valve, rated to 150 psi, is a single acting spring return 2/2 valve. The device requires a pneumatic pilot signal to open. When the pilot signal is removed, the internal spring will close the blocking valve, bubble tight.

Blow guns have a die cast zinc body, painted finish, and finger guard with hang-up hook for easy storage. Nozzle options are: Brass, Vortec FLO-GAIN, Self-Regulating, and Pistol Grip.

These low silhouette versions of the muffler/filter are useful where space is a problem and/or to prevent contamination.  Use for vacuum relief or pressure equalization in gear boxes, oil tanks, or reservoirs.

339 series Check valves allow free flow in one direction and provide positive checked flow in the reverse direction. These valves are available with NPTF ports and are recommended for pneumatic service. Available in female to female connection only.

3047 series check valves allow free flow in one direction and provide positive checked flow in the reverse direction. These valves are available with NPTF ports and are recommended for pneumatic service. Available in male to male connection only.

E9 protectors are intended for mobile or quick venting applications, and breathers that require protection against clogging. They are ideal for valves in harsh conditions and time sensitive applications, such as lift-axles, pushers or tag axles.

The 3250 series flow control valves are designed to accurately meter the flow of air with large port sizes up to 1-1/2" NPT and flows of 1800 SCFM. Each valve has a fine screw adjustment, allowing precise settings that are secured by a sturdy lock nut.

Parker nabízí řadu produktů a příslušenství určených pro přípravu vzduchu v různých aplikacích, zahrnující kulové a otočné ventily, zpětné ventily, regulátory průtoku, ofukovací pistole, odvětrávací ventily a širokou škálu spojek, šroubení a konektorů.

air-preparation-accessories

<article class="ph-card-basic">
	<header class="ph-card-basic__header">
		<h2 class="ph-card-basic__title">Get your Parker account Today!</h2>
	</header>
	<div class="ph-card-basic__body">
		<p>Create one account to manage everything you do with Parker, from your shopping preferences to your application access.</p>
	</div>
	<footer class="ph-card-basic__footer">
		<a href="[registerUrl]" class="button accent-button round-button small-button">Register now</a>
	</footer>
</article>