Thru Drive Vane Pump - Series T6*R | Parker NA

Thru Drive Vane Pump - Series T6*R | Product Series

Filtrovat podle

    Nebyly vybrány žádné filtry

Ještě dnes si založte účet Parker!

Vytvořte si jeden účet, pomocí kterého budete moci spravovat veškerou svoji aktivitu v systému Parker, od předvoleb nákupu až po přístup k aplikacím.

Thru Drive Vane Pump - Series T6*R

Thru Drive Vane Pump - Series T6*R

Our drive train pumps allow the use of vane pump technology with a huge combination of other pumps, supported by SAE A, SAE B or SAE C rear drive.

Technické parametry

  • Typ čerpadla: Vane, Fixed
  • Konfigurace: Single, Triple
  • Geometrický objem: 10 to 268.7 cm3/rev, 0.6 to 16 inch3/rev
  • Provozní tlak: up to 275 bar depending on Size., up to 3900 psi
  • Průtok: 20 to 537 L/min @2000 Rpm, 5 to 142 gal/min @2000 Rpm
  • Provozní rychlost: 400 to 2800 RPM
  • Minimální teplota tekutiny/plynu: See Catalogue
  • Maximální teplota tekutiny/plynu: See Catalogue
  • Velikost příruby: SAE B 2 bolts, SAE C 2 bolts, 2-Bolt SAE B, 2-Bolt SAE C
  • Provozní teplota: See Catalogue
  • Hmotnost: 17 to 52 kg
  • Jmenovitá rychlost: 2000 to 2800 RPM
  • Velikost hrdla: 1-1/2 to 3 inch Suction port, 1 to 1-1/2 inch Pressure port
  • Přerušovaný výstupní tlak, hrdlo 1: 90 to 275 bar
  • Trvalý výstupní tlak, hrdlo 1: 75 to 240 bar
  • Značka: Denison
  • Výška: 150 to 188 mm
  • Délka: 282 to 376 mm
  • Šířka: 175 to 213 mm
Safety Warning

Celý popis produktu

Parker drive train vane pumps reduce installation costs and drive extended life due to their high pressure capability, up to 275 bar in a small operating envelope.   

Markets:
• Industrial
• Mobile

Features & Benefits:
• Optimized Energy Consumption : The mechanical & volumetric efficiency is consistently 94 %, reducing heat generation and allowing speeds down to 400 RPM at full pressure.
• Low Noise Level : The T6*R series has a wide speed range capability from 400 rpm to 3600 rpm, combined with large size cartridge displacements, driving the lowest noise level in the smallest envelope.
• Long Lifetime : The double lip vane concept increases the resistance to particle contamination. The low ripple pressure reduces piping noise and protects other components in the circuit.
• Manageable Installation : The port orientation allows customized installation and is ideal in restricted access conditions. In addition, utilising the same body for all displacements highly simplifies installation design.

Applications:
• Presses
• Injection machines
• Cranes

Související dokumenty

×
Produkty

687PDC
687925