Electrically Conductive Elastomer Materials Products from parker include

: Default
Sort By Product Attributes
Division

Division

Filler Material

Filler Material

Polymer Family

Polymer Family

???ACCE_Region_Product_List???
Electrically Conductive Elastomer Materials ( 1 - 20 of 28 )
Switch to list view
List
Switch to grid view
Grid
  • 1
  • 2
Next Page
  • 1
  • 2
Next Next Page
Compare Selected
Product Listing

Typical Shielding Requirements: 95 dB, Material of choice for high shielding effectiveness where CBRN or NBC fluid resistance is needed; good performance in corrosive environments.

CHO-SEAL 1310 conductive elastomer gaskets are an ideal choice for performance in non-corrosive environments where moderate shielding is necessary.

Typical Shielding Requirements: 80 - 100 dB, High performance for non-corrosive environments; soft (45 Shore A) for low closure force where gasket geometry cannot be exploited; low tear strength; no fluid resistance.

Typical Shielding Requirements: 30 - 80 dB, Low-end shielding and ESD protection; high tensile strength; no corrosion or fluid resistance. Molded only.

Typical Shielding Requirements: 80 - 105 dB, Material of choice for high-end commercial applications; superior performance in non-corrosive environments requiring low compression forces.

Typical Shielding Requirements: 90 - 110 dB, Military grade gasket for corrosive environments; lightweight, 200°C max use temperature; good EMP resistance; molded, extruded and reinforced product forms.

Typical Shielding Requirements: 90 - 110 dB, Military grade gasket for corrosive environments; lightweight, 200°C max use temperature; good EMP resistance; molded, extruded and reinforced product forms.

Typical Shielding Requirements: 90 - 110 dB, High performance in harsh corrosive environments; material of choice for aircraft and marine military applications; good physical properties; molded, extruded and reinforced product forms.

Typical Shielding Requirements: 120 dB, High strength, hard (80 Shore A) material for waveguide, choke, cover, and flanges with grooves for EMI and pressure sealing.

Typical Shielding Requirements: 105 - 120 dB, Resists highest level of EMP induced current; military gasket of choice in non-corrosive environments; excellent processing for molding and extrusion.

Typical Shielding Requirements: 105 - 120 dB, Resists highest level of EMP induced current; military gasket of choice in non-corrosive environments; excellent processing for molding and extrusion.

Typical Shielding Requirements: >120 dB, Highest shielding effectiveness and through conductivity performance; higher physical properties; excellent processing; also available in a fabric reinforced format.

Typical Shielding Requirements: >120 dB, Highest shielding effectiveness and through conductivity performance; higher physical properties; excellent processing; also available in a fabric reinforced format.

Typical Shielding Requirements: 100 dB, Good performance in moderately corrosive environments; material of choice for flange finishes needing bite-through for good electrical contact requiring low compression forces.

Typical Shielding Requirements: 80 - 105 dB, Standard material for high volume injection and compression molding and small extrusions; high performance in non-corrosive environments; used in grounding applications with little or no vibration.

Typical Shielding Requirements: 100 dB, Good performance in moderately corrosive environments; material of choice for flange finishes needing bite-through for good electrical contact is designed for thin wall extrusions requiring low compression forces.

Typical Shielding Requirements: 100 dB, Good performance in moderately corrosive environments; material of choice for flange finishes needing “bite-through” for good electrical contact. Flame retardant 6370(E) and 6371(M) are UL 94 V-0 rated.

Typical Shielding Requirements: 100 dB, Good performance in moderately corrosive environments; material of choice for flange finishes needing “bite-through” for good electrical contact. Flame retardant 6370 and 6371 are UL 94 V-0 rated.

CHO-SEAL 6460 is an electrically conductive molding grade environmental seal specifically formulated to lower your total cost of ownership by reducing the incidence of field repairs and maintenance.

Typical Shielding Requirements: >100 dB, Highest performance in harsh environments; excellent shielding; best choice for corrosion requirements against aluminum.

Switch to list view
List
Switch to grid view
Grid
  • 1
  • 2
Next Page
  • 1
  • 2
Next Next Page

Contact Us

Americas
USA, Canada, Mexico
c-parker@parker.com
1-800-272-7537
Europe
00800 27 27 5374
AOG (Aircraft on Ground)
1-949-851-4357