Proflow II-E Pleated Membrane Filter Cartridge | Chemical resistance for ultra pure microelectronics liquids and gases | Parker NA

Proflow II-E Pleated Membrane Filter Cartridge | Chemical resistance for ultra pure microelectronics liquids and gases

Where to Buy

The Proflow™II-E pleated membrane filter cartridge uses a PTFE membrane along with high-purity polypropylene supports that provide an economical alternative to all-fluoropolymer filter cartridges.

Technical Specifications

Brand: Parker
Industry: Microelectronics
Function: Clarification, Prefiltration, Polishing
Media: PTFE
Filter Construction: Pleated Membrane
End Cap Configuration: Polypropylene
Core Type: Polypropylene
Hose Reinforcement Material & Structure: Polypropylene
Flow Rate: 3.2 gal/min (gpm/psid) per 10 inch Cartridge Equivalent, 7.6 gal/min (gpm/psid) per 10 inch Cartridge Equivalent, 9.1 gal/min (gpm/psid) per 10 inch Cartridge Equivalent, 1.7 gal/min (gpm/psid) per 10 inch Cartridge Equivalent, 0.8 gal/min (gpm/psid) per 10 inch Cartridge Equivalent, 0.6 gal/min (gpm/psid) per 10 inch Cartridge Equivalent
Outside Diameter: 2.75 inch

Safety Warning

Full Product Description

The Proflow™II-E filter cartridge uses a PTFE membrane along with high-purity polypropylene supports that provide an economical alternative to all-fluoropolymer filter cartridges. It provides a high degree of retention and cleanliness along with good flow and lifetime. This filter is ideally suited for ultrapure microelectronics fluids and gases. The hydrophobic PTFE filter membrane serves as a highly efficient barrier to insure low moisture content of gases. It is available dry or wet-packed for quick installation and lower extractables.
Features/Benefits
• Good liquid and gas flow rates
• Wet-pack option for quick installation
• PTFE/ PP construction for chemical resistance
• Wide variety of configurations and ratings
• 100% integrity tested in cleanroom environment

Applications
• Bulk chemical delivery filtration for:
– Acids
– Bases
– Solvents
– Photochemical
• Wet etch and clean filtration for:
– Dilute acids
– DI water (<80°C)
• Ultrapure electronics-grade gas filtration

Related Documents

Literature and Reference Materials
Filtration Product Linecard for Microelectronic Applications
Filtration guide to microelectronics products & applications
Microelectronics Filtration Applications Interactive
Proflow II-E Pleated Membrane Filter Cartridge Data Sheet
[PRODUCT GUIDE] Filter End Caps

Selector Guides
High-Purity Chemical Filtration Product Guide

Share / Email

Showing 1 to 100 of 137 entries

Products	Options	Style	End Cap Material	Length (inch)	Micron Rating (µm)	Seal Material	Secondary Seal	Special Options	Options	Style	End Cap Material	Length (inch)	Micron Rating (µm)	Seal Material	Secondary Seal	Special Options
34-10105-001-NN-E	Standard	No Insert	DOE	5	0.1	None	No gasket	Standard	1__Standard __1	2__No Insert __2	3__DOE __3	4__5 __4	5__0.1 __5	6__None __6	7__No gasket __7	8__Standard __8
34-10110-002-11-E	Standard	No Insert	DOE	10	0.2	EPDM	5mm thick gasket	Standard	1__Standard __1	2__No Insert __2	3__DOE __3	4__10 __4	5__0.2 __5	6__EPDM __6	7__5mm thick gasket __7	8__Standard __8
34-10110-002-41-E	Standard	No Insert	DOE	10	0.2	Viton	5mm thick gasket	Standard	1__Standard __1	2__No Insert __2	3__DOE __3	4__10 __4	5__0.2 __5	6__Viton __6	7__5mm thick gasket __7	8__Standard __8
34-10110-004-NN-E	Standard	No Insert	DOE	10	0.45	None	No gasket	Standard	1__Standard __1	2__No Insert __2	3__DOE __3	4__10 __4	5__0.45 __5	6__None __6	7__No gasket __7	8__Standard __8
34-10110-010-41-E	Standard	No Insert	DOE	10	1	Viton	5mm thick gasket	Standard	1__Standard __1	2__No Insert __2	3__DOE __3	4__10 __4	5__1 __5	6__Viton __6	7__5mm thick gasket __7	8__Standard __8
34-10110-010-NN-E	Standard	No Insert	DOE	10	1	None	No gasket	Standard	1__Standard __1	2__No Insert __2	3__DOE __3	4__10 __4	5__1 __5	6__None __6	7__No gasket __7	8__Standard __8
34-10130-010-41-E	Standard	No Insert	DOE	30	1	Viton	5mm thick gasket	Standard	1__Standard __1	2__No Insert __2	3__DOE __3	4__30 __4	5__1 __5	6__Viton __6	7__5mm thick gasket __7	8__Standard __8
34-10130-010-NN-E	Standard	No Insert	DOE	30	1	None	No gasket	Standard	1__Standard __1	2__No Insert __2	3__DOE __3	4__30 __4	5__1 __5	6__None __6	7__No gasket __7	8__Standard __8
34-10140-004-NN-E	Standard	No Insert	DOE	40	0.45	None	No gasket	Standard	1__Standard __1	2__No Insert __2	3__DOE __3	4__40 __4	5__0.45 __5	6__None __6	7__No gasket __7	8__Standard __8
34-10210-925-5-E	Standard	No Insert	226 O-Ring/Flat Cap	10	0.03	FEP Encapsulated Viton	N/A	Standard	1__Standard __1	2__No Insert __2	3__226 O-Ring/Flat Cap __3	4__10 __4	5__0.03 __5	6__FEP Encapsulated Viton __6	7__N/A __7	8__Standard __8
34-10305-002-5-E	Standard	No Insert	222 O-Ring/Flat Cap	5	0.2	FEP Encapsulated Viton	N/A	Standard	1__Standard __1	2__No Insert __2	3__222 O-Ring/Flat Cap __3	4__5 __4	5__0.2 __5	6__FEP Encapsulated Viton __6	7__N/A __7	8__Standard __8
34-10310-001-1-E	Standard	No Insert	222 O-Ring/Flat Cap	10	0.1	EPDM	N/A	Standard	1__Standard __1	2__No Insert __2	3__222 O-Ring/Flat Cap __3	4__10 __4	5__0.1 __5	6__EPDM __6	7__N/A __7	8__Standard __8
34-10310-001-5-E	Standard	No Insert	222 O-Ring/Flat Cap	10	0.1	FEP Encapsulated Viton	N/A	Standard	1__Standard __1	2__No Insert __2	3__222 O-Ring/Flat Cap __3	4__10 __4	5__0.1 __5	6__FEP Encapsulated Viton __6	7__N/A __7	8__Standard __8
34-10310-001-5-EW	Standard	No Insert	222 O-Ring/Flat Cap	10	0.1	FEP Encapsulated Viton	N/A	Wet Packed	1__Standard __1	2__No Insert __2	3__222 O-Ring/Flat Cap __3	4__10 __4	5__0.1 __5	6__FEP Encapsulated Viton __6	7__N/A __7	8__Wet Packed __8
34-10310-002-1-E	Standard	No Insert	222 O-Ring/Flat Cap	10	0.2	EPDM	N/A	Standard	1__Standard __1	2__No Insert __2	3__222 O-Ring/Flat Cap __3	4__10 __4	5__0.2 __5	6__EPDM __6	7__N/A __7	8__Standard __8
34-10310-002-4-E	Standard	No Insert	222 O-Ring/Flat Cap	10	0.2	Viton	N/A	Standard	1__Standard __1	2__No Insert __2	3__222 O-Ring/Flat Cap __3	4__10 __4	5__0.2 __5	6__Viton __6	7__N/A __7	8__Standard __8
34-10310-002-5-E	Standard	No Insert	222 O-Ring/Flat Cap	10	0.2	FEP Encapsulated Viton	N/A	Standard	1__Standard __1	2__No Insert __2	3__222 O-Ring/Flat Cap __3	4__10 __4	5__0.2 __5	6__FEP Encapsulated Viton __6	7__N/A __7	8__Standard __8
34-10310-002-5-EW	Standard	No Insert	222 O-Ring/Flat Cap	10	0.2	FEP Encapsulated Viton	N/A	Wet Packed	1__Standard __1	2__No Insert __2	3__222 O-Ring/Flat Cap __3	4__10 __4	5__0.2 __5	6__FEP Encapsulated Viton __6	7__N/A __7	8__Wet Packed __8
34-10310-004-5-E	Standard	No Insert	222 O-Ring/Flat Cap	10	0.45	FEP Encapsulated Viton	N/A	Standard	1__Standard __1	2__No Insert __2	3__222 O-Ring/Flat Cap __3	4__10 __4	5__0.45 __5	6__FEP Encapsulated Viton __6	7__N/A __7	8__Standard __8
34-10310-004-5-EW	Standard	No Insert	222 O-Ring/Flat Cap	10	0.45	FEP Encapsulated Viton	N/A	Wet Packed	1__Standard __1	2__No Insert __2	3__222 O-Ring/Flat Cap __3	4__10 __4	5__0.45 __5	6__FEP Encapsulated Viton __6	7__N/A __7	8__Wet Packed __8
34-10310-004-6-E	Standard	No Insert	222 O-Ring/Flat Cap	10	0.45	FEP Encapsulated Silicone	N/A	Standard	1__Standard __1	2__No Insert __2	3__222 O-Ring/Flat Cap __3	4__10 __4	5__0.45 __5	6__FEP Encapsulated Silicone __6	7__N/A __7	8__Standard __8
34-10310-010-4-E	Standard	No Insert	222 O-Ring/Flat Cap	10	1	Viton	N/A	Standard	1__Standard __1	2__No Insert __2	3__222 O-Ring/Flat Cap __3	4__10 __4	5__1 __5	6__Viton __6	7__N/A __7	8__Standard __8
34-10310-010-5-E	Standard	No Insert	222 O-Ring/Flat Cap	10	1	FEP Encapsulated Viton	N/A	Standard	1__Standard __1	2__No Insert __2	3__222 O-Ring/Flat Cap __3	4__10 __4	5__1 __5	6__FEP Encapsulated Viton __6	7__N/A __7	8__Standard __8
34-10310-010-5-EW	Standard	No Insert	222 O-Ring/Flat Cap	10	1	FEP Encapsulated Viton	N/A	Wet Packed	1__Standard __1	2__No Insert __2	3__222 O-Ring/Flat Cap __3	4__10 __4	5__1 __5	6__FEP Encapsulated Viton __6	7__N/A __7	8__Wet Packed __8
34-10310-010-6-E	Standard	No Insert	222 O-Ring/Flat Cap	10	1	FEP Encapsulated Silicone	N/A	Standard	1__Standard __1	2__No Insert __2	3__222 O-Ring/Flat Cap __3	4__10 __4	5__1 __5	6__FEP Encapsulated Silicone __6	7__N/A __7	8__Standard __8
36-10310-925-5-EW	DI Flush	No Insert	222 O-Ring/Flat Cap	10	0.05	FEP Encapsulated Viton	N/A	Wet Packed	1__DI Flush __1	2__No Insert __2	3__222 O-Ring/Flat Cap __3	4__10 __4	5__0.05 __5	6__FEP Encapsulated Viton __6	7__N/A __7	8__Wet Packed __8
36-10320-001-5-E	DI Flush	No Insert	222 O-Ring/Flat Cap	20	0.1	FEP Encapsulated Viton	N/A	Standard	1__DI Flush __1	2__No Insert __2	3__222 O-Ring/Flat Cap __3	4__20 __4	5__0.1 __5	6__FEP Encapsulated Viton __6	7__N/A __7	8__Standard __8
36-10320-001-5-EW	DI Flush	No Insert	222 O-Ring/Flat Cap	20	0.1	FEP Encapsulated Viton	N/A	Wet Packed	1__DI Flush __1	2__No Insert __2	3__222 O-Ring/Flat Cap __3	4__20 __4	5__0.1 __5	6__FEP Encapsulated Viton __6	7__N/A __7	8__Wet Packed __8
36-10320-002-5-E	DI Flush	No Insert	222 O-Ring/Flat Cap	20	0.2	FEP Encapsulated Viton	N/A	Standard	1__DI Flush __1	2__No Insert __2	3__222 O-Ring/Flat Cap __3	4__20 __4	5__0.2 __5	6__FEP Encapsulated Viton __6	7__N/A __7	8__Standard __8
36-10320-002-5-EW	DI Flush	No Insert	222 O-Ring/Flat Cap	20	0.2	FEP Encapsulated Viton	N/A	Wet Packed	1__DI Flush __1	2__No Insert __2	3__222 O-Ring/Flat Cap __3	4__20 __4	5__0.2 __5	6__FEP Encapsulated Viton __6	7__N/A __7	8__Wet Packed __8
36-10320-002-6-E	DI Flush	No Insert	222 O-Ring/Flat Cap	20	0.2	FEP Encapsulated Silicone	N/A	Standard	1__DI Flush __1	2__No Insert __2	3__222 O-Ring/Flat Cap __3	4__20 __4	5__0.2 __5	6__FEP Encapsulated Silicone __6	7__N/A __7	8__Standard __8
36-10320-004-6-E	DI Flush	No Insert	222 O-Ring/Flat Cap	20	0.45	FEP Encapsulated Silicone	N/A	Standard	1__DI Flush __1	2__No Insert __2	3__222 O-Ring/Flat Cap __3	4__20 __4	5__0.45 __5	6__FEP Encapsulated Silicone __6	7__N/A __7	8__Standard __8
36-10320-923-5-EW	DI Flush	No Insert	222 O-Ring/Flat Cap	20	0.03	FEP Encapsulated Viton	N/A	Wet Packed	1__DI Flush __1	2__No Insert __2	3__222 O-Ring/Flat Cap __3	4__20 __4	5__0.03 __5	6__FEP Encapsulated Viton __6	7__N/A __7	8__Wet Packed __8
36-10320-925-5-E	DI Flush	No Insert	222 O-Ring/Flat Cap	20	0.05	FEP Encapsulated Viton	N/A	Standard	1__DI Flush __1	2__No Insert __2	3__222 O-Ring/Flat Cap __3	4__20 __4	5__0.05 __5	6__FEP Encapsulated Viton __6	7__N/A __7	8__Standard __8
36-10330-001-5-E	DI Flush	No Insert	222 O-Ring/Flat Cap	30	0.1	FEP Encapsulated Viton	N/A	Standard	1__DI Flush __1	2__No Insert __2	3__222 O-Ring/Flat Cap __3	4__30 __4	5__0.1 __5	6__FEP Encapsulated Viton __6	7__N/A __7	8__Standard __8
36-10330-001-5-EW	DI Flush	No Insert	222 O-Ring/Flat Cap	30	0.1	FEP Encapsulated Viton	N/A	Wet Packed	1__DI Flush __1	2__No Insert __2	3__222 O-Ring/Flat Cap __3	4__30 __4	5__0.1 __5	6__FEP Encapsulated Viton __6	7__N/A __7	8__Wet Packed __8
36-10330-002-2-E	DI Flush	No Insert	222 O-Ring/Flat Cap	30	0.2	S7442	N/A	Standard	1__DI Flush __1	2__No Insert __2	3__222 O-Ring/Flat Cap __3	4__30 __4	5__0.2 __5	6__S7442 __6	7__N/A __7	8__Standard __8
36-10330-002-5-EW	DI Flush	No Insert	222 O-Ring/Flat Cap	30	0.2	FEP Encapsulated Viton	N/A	Wet Packed	1__DI Flush __1	2__No Insert __2	3__222 O-Ring/Flat Cap __3	4__30 __4	5__0.2 __5	6__FEP Encapsulated Viton __6	7__N/A __7	8__Wet Packed __8
36-10330-923-5-E	DI Flush	No Insert	222 O-Ring/Flat Cap	30	0.03	FEP Encapsulated Viton	N/A	Standard	1__DI Flush __1	2__No Insert __2	3__222 O-Ring/Flat Cap __3	4__30 __4	5__0.03 __5	6__FEP Encapsulated Viton __6	7__N/A __7	8__Standard __8
36-10330-925-5-EW	DI Flush	No Insert	222 O-Ring/Flat Cap	30	0.05	FEP Encapsulated Viton	N/A	Wet Packed	1__DI Flush __1	2__No Insert __2	3__222 O-Ring/Flat Cap __3	4__30 __4	5__0.05 __5	6__FEP Encapsulated Viton __6	7__N/A __7	8__Wet Packed __8
36-10710-001-4-E	DI Flush	No Insert	226 O-Ring/Fin	10	0.1	Viton	N/A	Standard	1__DI Flush __1	2__No Insert __2	3__226 O-Ring/Fin __3	4__10 __4	5__0.1 __5	6__Viton __6	7__N/A __7	8__Standard __8
36-10710-001-5-E	DI Flush	No Insert	226 O-Ring/Fin	10	0.1	FEP Encapsulated Viton	N/A	Standard	1__DI Flush __1	2__No Insert __2	3__226 O-Ring/Fin __3	4__10 __4	5__0.1 __5	6__FEP Encapsulated Viton __6	7__N/A __7	8__Standard __8
36-10710-010-5-E	DI Flush	No Insert	226 O-Ring/Fin	10	1	FEP Encapsulated Viton	N/A	Standard	1__DI Flush __1	2__No Insert __2	3__226 O-Ring/Fin __3	4__10 __4	5__1 __5	6__FEP Encapsulated Viton __6	7__N/A __7	8__Standard __8
36-10720-001-4-E	DI Flush	No Insert	226 O-Ring/Fin	20	0.1	Viton	N/A	Standard	1__DI Flush __1	2__No Insert __2	3__226 O-Ring/Fin __3	4__20 __4	5__0.1 __5	6__Viton __6	7__N/A __7	8__Standard __8
36-10720-001-5-E	DI Flush	No Insert	226 O-Ring/Fin	20	0.1	FEP Encapsulated Viton	N/A	Standard	1__DI Flush __1	2__No Insert __2	3__226 O-Ring/Fin __3	4__20 __4	5__0.1 __5	6__FEP Encapsulated Viton __6	7__N/A __7	8__Standard __8
36-10810-002-4-E	DI Flush	No Insert	222 O-Ring/Fin	10	0.2	Viton	N/A	Standard	1__DI Flush __1	2__No Insert __2	3__222 O-Ring/Fin __3	4__10 __4	5__0.2 __5	6__Viton __6	7__N/A __7	8__Standard __8
36-10810-925-5-E	DI Flush	No Insert	222 O-Ring/Fin	10	0.05	FEP Encapsulated Viton	N/A	Standard	1__DI Flush __1	2__No Insert __2	3__222 O-Ring/Fin __3	4__10 __4	5__0.05 __5	6__FEP Encapsulated Viton __6	7__N/A __7	8__Standard __8
36-A0305-001-5-E	DI Flush	1/2" Shortened 222 Fitting	222 O-Ring/Flat Cap	5	0.1	FEP Encapsulated Viton	N/A	Standard	1__DI Flush __1	2__1/2 Shortened 222 Fitting __2	3__222 O-Ring/Flat Cap __3	4__5 __4	5__0.1 __5	6__FEP Encapsulated Viton __6	7__N/A __7	8__Standard __8
36-A0310-001-5-EW	DI Flush	1/2" Shortened 222 Fitting	222 O-Ring/Flat Cap	10	0.1	FEP Encapsulated Viton	N/A	Wet Packed	1__DI Flush __1	2__1/2 Shortened 222 Fitting __2	3__222 O-Ring/Flat Cap __3	4__10 __4	5__0.1 __5	6__FEP Encapsulated Viton __6	7__N/A __7	8__Wet Packed __8
36-A0R10-001-5-EW	DI Flush	1/2" Shortened 222 Fitting	222 O-Ring/Recessed End Cap	10	0.1	FEP Encapsulated Viton	N/A	Wet Packed	1__DI Flush __1	2__1/2 Shortened 222 Fitting __2	3__222 O-Ring/Recessed End Cap __3	4__10 __4	5__0.1 __5	6__FEP Encapsulated Viton __6	7__N/A __7	8__Wet Packed __8
36-A0R10-925-5-E	DI Flush	1/2" Shortened 222 Fitting	222 O-Ring/Recessed End Cap	10	0.05	FEP Encapsulated Viton	N/A	Standard	1__DI Flush __1	2__1/2 Shortened 222 Fitting __2	3__222 O-Ring/Recessed End Cap __3	4__10 __4	5__0.05 __5	6__FEP Encapsulated Viton __6	7__N/A __7	8__Standard __8
36-A0R10-925-5-EW	DI Flush	1/2" Shortened 222 Fitting	222 O-Ring/Recessed End Cap	10	0.05	FEP Encapsulated Viton	N/A	Wet Packed	1__DI Flush __1	2__1/2 Shortened 222 Fitting __2	3__222 O-Ring/Recessed End Cap __3	4__10 __4	5__0.05 __5	6__FEP Encapsulated Viton __6	7__N/A __7	8__Wet Packed __8
34-10720-010-5-E	Standard	No Insert	226 O-Ring/Fin	20	1	FEP Encapsulated Viton	N/A	Standard	1__Standard __1	2__No Insert __2	3__226 O-Ring/Fin __3	4__20 __4	5__1 __5	6__FEP Encapsulated Viton __6	7__N/A __7	8__Standard __8
34-10720-010-6-E	Standard	No Insert	226 O-Ring/Fin	20	1	FEP Encapsulated Silicone	N/A	Standard	1__Standard __1	2__No Insert __2	3__226 O-Ring/Fin __3	4__20 __4	5__1 __5	6__FEP Encapsulated Silicone __6	7__N/A __7	8__Standard __8
34-10730-002-2-E	Standard	No Insert	226 O-Ring/Fin	30	0.2	S7442	N/A	Standard	1__Standard __1	2__No Insert __2	3__226 O-Ring/Fin __3	4__30 __4	5__0.2 __5	6__S7442 __6	7__N/A __7	8__Standard __8
34-10730-002-4-E	Standard	No Insert	226 O-Ring/Fin	30	0.2	Viton	N/A	Standard	1__Standard __1	2__No Insert __2	3__226 O-Ring/Fin __3	4__30 __4	5__0.2 __5	6__Viton __6	7__N/A __7	8__Standard __8
34-10810-002-1-E	Standard	No Insert	222 O-Ring/Fin	10	0.2	EPDM	N/A	Standard	1__Standard __1	2__No Insert __2	3__222 O-Ring/Fin __3	4__10 __4	5__0.2 __5	6__EPDM __6	7__N/A __7	8__Standard __8
34-10810-925-5-E	Standard	No Insert	222 O-Ring/Fin	10	0.05	FEP Encapsulated Viton	N/A	Standard	1__Standard __1	2__No Insert __2	3__222 O-Ring/Fin __3	4__10 __4	5__0.05 __5	6__FEP Encapsulated Viton __6	7__N/A __7	8__Standard __8
34-10820-001-1-E	Standard	No Insert	222 O-Ring/Fin	20	0.1	EPDM	N/A	Standard	1__Standard __1	2__No Insert __2	3__222 O-Ring/Fin __3	4__20 __4	5__0.1 __5	6__EPDM __6	7__N/A __7	8__Standard __8
34-10820-002-5-E	Standard	No Insert	222 O-Ring/Fin	20	0.2	FEP Encapsulated Viton	N/A	Standard	1__Standard __1	2__No Insert __2	3__222 O-Ring/Fin __3	4__20 __4	5__0.2 __5	6__FEP Encapsulated Viton __6	7__N/A __7	8__Standard __8
34-10820-010-6-E	Standard	No Insert	222 O-Ring/Fin	20	1	FEP Encapsulated Silicone	N/A	Standard	1__Standard __1	2__No Insert __2	3__222 O-Ring/Fin __3	4__20 __4	5__1 __5	6__FEP Encapsulated Silicone __6	7__N/A __7	8__Standard __8
34-10830-001-5-E	Standard	No Insert	222 O-Ring/Fin	30	0.1	FEP Encapsulated Viton	N/A	Standard	1__Standard __1	2__No Insert __2	3__222 O-Ring/Fin __3	4__30 __4	5__0.1 __5	6__FEP Encapsulated Viton __6	7__N/A __7	8__Standard __8
34-10830-002-4-E	Standard	No Insert	222 O-Ring/Fin	30	0.2	Viton	N/A	Standard	1__Standard __1	2__No Insert __2	3__222 O-Ring/Fin __3	4__30 __4	5__0.2 __5	6__Viton __6	7__N/A __7	8__Standard __8
34-10830-010-5-E	Standard	No Insert	222 O-Ring/Fin	30	1	FEP Encapsulated Viton	N/A	Standard	1__Standard __1	2__No Insert __2	3__222 O-Ring/Fin __3	4__30 __4	5__1 __5	6__FEP Encapsulated Viton __6	7__N/A __7	8__Standard __8
34-10830-010-6-E	Standard	No Insert	222 O-Ring/Fin	30	1	FEP Encapsulated Silicone	N/A	Standard	1__Standard __1	2__No Insert __2	3__222 O-Ring/Fin __3	4__30 __4	5__1 __5	6__FEP Encapsulated Silicone __6	7__N/A __7	8__Standard __8
34-10830-925-5-E	Standard	No Insert	222 O-Ring/Fin	30	0.05	FEP Encapsulated Viton	N/A	Standard	1__Standard __1	2__No Insert __2	3__222 O-Ring/Fin __3	4__30 __4	5__0.05 __5	6__FEP Encapsulated Viton __6	7__N/A __7	8__Standard __8
34-10H10-002-1-E	Standard	No Insert	213 O-Ring/Recessed End Cap	10	0.2	EPDM	N/A	Standard	1__Standard __1	2__No Insert __2	3__213 O-Ring/Recessed End Cap __3	4__10 __4	5__0.2 __5	6__EPDM __6	7__N/A __7	8__Standard __8
34-10H20-002-1-E	Standard	No Insert	213 O-Ring/Recessed End Cap	20	0.2	EPDM	N/A	Standard	1__Standard __1	2__No Insert __2	3__213 O-Ring/Recessed End Cap __3	4__20 __4	5__0.2 __5	6__EPDM __6	7__N/A __7	8__Standard __8
34-50310-001-5-E	Standard	Encapsulated Stainless Steel	222 O-Ring/Flat Cap	10	0.1	FEP Encapsulated Viton	N/A	Standard	1__Standard __1	2__Encapsulated Stainless Steel __2	3__222 O-Ring/Flat Cap __3	4__10 __4	5__0.1 __5	6__FEP Encapsulated Viton __6	7__N/A __7	8__Standard __8
34-50310-002-5-E	Standard	Encapsulated Stainless Steel	222 O-Ring/Flat Cap	10	0.2	FEP Encapsulated Viton	N/A	Standard	1__Standard __1	2__Encapsulated Stainless Steel __2	3__222 O-Ring/Flat Cap __3	4__10 __4	5__0.2 __5	6__FEP Encapsulated Viton __6	7__N/A __7	8__Standard __8
34-50740-002-2-EW	Standard	Encapsulated Stainless Steel	226 O-Ring/Fin	40	0.2	S7442	N/A	Wet Packed	1__Standard __1	2__Encapsulated Stainless Steel __2	3__226 O-Ring/Fin __3	4__40 __4	5__0.2 __5	6__S7442 __6	7__N/A __7	8__Wet Packed __8
34-50740-002-5-EW	Standard	Encapsulated Stainless Steel	226 O-Ring/Fin	40	0.2	FEP Encapsulated Viton	N/A	Wet Packed	1__Standard __1	2__Encapsulated Stainless Steel __2	3__226 O-Ring/Fin __3	4__40 __4	5__0.2 __5	6__FEP Encapsulated Viton __6	7__N/A __7	8__Wet Packed __8
34-50830-001-2-EW	Standard	Encapsulated Stainless Steel	222 O-Ring/Fin	30	0.1	S7442	N/A	Wet Packed	1__Standard __1	2__Encapsulated Stainless Steel __2	3__222 O-Ring/Fin __3	4__30 __4	5__0.1 __5	6__S7442 __6	7__N/A __7	8__Wet Packed __8
34-60710-002-2-E	Standard	Encapsulated Polysulfone	226 O-Ring/Fin	10	0.2	S7442	N/A	Standard	1__Standard __1	2__Encapsulated Polysulfone __2	3__226 O-Ring/Fin __3	4__10 __4	5__0.2 __5	6__S7442 __6	7__N/A __7	8__Standard __8
34-60730-001-2-EW	Standard	Encapsulated Polysulfone	226 O-Ring/Fin	30	0.1	S7442	N/A	Wet Packed	1__Standard __1	2__Encapsulated Polysulfone __2	3__226 O-Ring/Fin __3	4__30 __4	5__0.1 __5	6__S7442 __6	7__N/A __7	8__Wet Packed __8
34-A0305-002-1-E	Standard	1/2" Shortened 222 Fitting	222 O-Ring/Flat Cap	5	0.2	EPDM	N/A	Standard	1__Standard __1	2__1/2 Shortened 222 Fitting __2	3__222 O-Ring/Flat Cap __3	4__5 __4	5__0.2 __5	6__EPDM __6	7__N/A __7	8__Standard __8
34-A0310-001-1-E	Standard	1/2" Shortened 222 Fitting	222 O-Ring/Flat Cap	10	0.1	EPDM	N/A	Standard	1__Standard __1	2__1/2 Shortened 222 Fitting __2	3__222 O-Ring/Flat Cap __3	4__10 __4	5__0.1 __5	6__EPDM __6	7__N/A __7	8__Standard __8
34-A0310-001-5-E	Standard	1/2" Shortened 222 Fitting	222 O-Ring/Flat Cap	10	0.1	FEP Encapsulated Viton	N/A	Standard	1__Standard __1	2__1/2 Shortened 222 Fitting __2	3__222 O-Ring/Flat Cap __3	4__10 __4	5__0.1 __5	6__FEP Encapsulated Viton __6	7__N/A __7	8__Standard __8
34-A0310-001-5-EW	Standard	1/2" Shortened 222 Fitting	222 O-Ring/Flat Cap	10	0.1	FEP Encapsulated Viton	N/A	Wet Packed	1__Standard __1	2__1/2 Shortened 222 Fitting __2	3__222 O-Ring/Flat Cap __3	4__10 __4	5__0.1 __5	6__FEP Encapsulated Viton __6	7__N/A __7	8__Wet Packed __8
34-10310-925-1-E	Standard	No Insert	222 O-Ring/Flat Cap	10	0.05	EPDM	N/A	Standard	1__Standard __1	2__No Insert __2	3__222 O-Ring/Flat Cap __3	4__10 __4	5__0.05 __5	6__EPDM __6	7__N/A __7	8__Standard __8
34-10310-925-5-E	Standard	No Insert	222 O-Ring/Flat Cap	10	0.05	FEP Encapsulated Viton	N/A	Standard	1__Standard __1	2__No Insert __2	3__222 O-Ring/Flat Cap __3	4__10 __4	5__0.05 __5	6__FEP Encapsulated Viton __6	7__N/A __7	8__Standard __8
34-10310-925-5-EW	Standard	No Insert	222 O-Ring/Flat Cap	10	0.05	FEP Encapsulated Viton	N/A	Wet Packed	1__Standard __1	2__No Insert __2	3__222 O-Ring/Flat Cap __3	4__10 __4	5__0.05 __5	6__FEP Encapsulated Viton __6	7__N/A __7	8__Wet Packed __8
34-10320-001-1-E	Standard	No Insert	222 O-Ring/Flat Cap	20	0.1	EPDM	N/A	Standard	1__Standard __1	2__No Insert __2	3__222 O-Ring/Flat Cap __3	4__20 __4	5__0.1 __5	6__EPDM __6	7__N/A __7	8__Standard __8
34-10320-001-1-EW	Standard	No Insert	222 O-Ring/Flat Cap	20	0.1	EPDM	N/A	Wet Packed	1__Standard __1	2__No Insert __2	3__222 O-Ring/Flat Cap __3	4__20 __4	5__0.1 __5	6__EPDM __6	7__N/A __7	8__Wet Packed __8
34-10320-001-2-E	Standard	No Insert	222 O-Ring/Flat Cap	20	0.1	S7442	N/A	Standard	1__Standard __1	2__No Insert __2	3__222 O-Ring/Flat Cap __3	4__20 __4	5__0.1 __5	6__S7442 __6	7__N/A __7	8__Standard __8
34-10320-001-5-E	Standard	No Insert	222 O-Ring/Flat Cap	20	0.1	FEP Encapsulated Viton	N/A	Standard	1__Standard __1	2__No Insert __2	3__222 O-Ring/Flat Cap __3	4__20 __4	5__0.1 __5	6__FEP Encapsulated Viton __6	7__N/A __7	8__Standard __8
34-10320-001-5-EW	Standard	No Insert	222 O-Ring/Flat Cap	20	0.1	FEP Encapsulated Viton	N/A	Wet Packed	1__Standard __1	2__No Insert __2	3__222 O-Ring/Flat Cap __3	4__20 __4	5__0.1 __5	6__FEP Encapsulated Viton __6	7__N/A __7	8__Wet Packed __8
34-10320-002-5-E	Standard	No Insert	222 O-Ring/Flat Cap	20	0.2	FEP Encapsulated Viton	N/A	Standard	1__Standard __1	2__No Insert __2	3__222 O-Ring/Flat Cap __3	4__20 __4	5__0.2 __5	6__FEP Encapsulated Viton __6	7__N/A __7	8__Standard __8
34-10320-002-5-EW	Standard	No Insert	222 O-Ring/Flat Cap	20	0.2	FEP Encapsulated Viton	N/A	Wet Packed	1__Standard __1	2__No Insert __2	3__222 O-Ring/Flat Cap __3	4__20 __4	5__0.2 __5	6__FEP Encapsulated Viton __6	7__N/A __7	8__Wet Packed __8
34-10320-004-1-E	Standard	No Insert	222 O-Ring/Flat Cap	20	0.45	EPDM	N/A	Standard	1__Standard __1	2__No Insert __2	3__222 O-Ring/Flat Cap __3	4__20 __4	5__0.45 __5	6__EPDM __6	7__N/A __7	8__Standard __8
34-10320-010-4-E	Standard	No Insert	222 O-Ring/Flat Cap	20	1	Viton	N/A	Standard	1__Standard __1	2__No Insert __2	3__222 O-Ring/Flat Cap __3	4__20 __4	5__1 __5	6__Viton __6	7__N/A __7	8__Standard __8
34-10320-925-5-EW	Standard	No Insert	222 O-Ring/Flat Cap	20	0.05	FEP Encapsulated Viton	N/A	Wet Packed	1__Standard __1	2__No Insert __2	3__222 O-Ring/Flat Cap __3	4__20 __4	5__0.05 __5	6__FEP Encapsulated Viton __6	7__N/A __7	8__Wet Packed __8
34-10330-001-1-E	Standard	No Insert	222 O-Ring/Flat Cap	30	0.1	EPDM	N/A	Standard	1__Standard __1	2__No Insert __2	3__222 O-Ring/Flat Cap __3	4__30 __4	5__0.1 __5	6__EPDM __6	7__N/A __7	8__Standard __8
34-10330-001-1-EW	Standard	No Insert	222 O-Ring/Flat Cap	30	0.1	EPDM	N/A	Wet Packed	1__Standard __1	2__No Insert __2	3__222 O-Ring/Flat Cap __3	4__30 __4	5__0.1 __5	6__EPDM __6	7__N/A __7	8__Wet Packed __8
34-10330-001-5-E	Standard	No Insert	222 O-Ring/Flat Cap	30	0.1	FEP Encapsulated Viton	N/A	Standard	1__Standard __1	2__No Insert __2	3__222 O-Ring/Flat Cap __3	4__30 __4	5__0.1 __5	6__FEP Encapsulated Viton __6	7__N/A __7	8__Standard __8
34-10330-002-5-E	Standard	No Insert	222 O-Ring/Flat Cap	30	0.2	FEP Encapsulated Viton	N/A	Standard	1__Standard __1	2__No Insert __2	3__222 O-Ring/Flat Cap __3	4__30 __4	5__0.2 __5	6__FEP Encapsulated Viton __6	7__N/A __7	8__Standard __8
34-10330-002-5-EW	Standard	No Insert	222 O-Ring/Flat Cap	30	0.2	FEP Encapsulated Viton	N/A	Wet Packed	1__Standard __1	2__No Insert __2	3__222 O-Ring/Flat Cap __3	4__30 __4	5__0.2 __5	6__FEP Encapsulated Viton __6	7__N/A __7	8__Wet Packed __8
34-10330-923-5-E	Standard	No Insert	222 O-Ring/Flat Cap	30	0.03	FEP Encapsulated Viton	N/A	Standard	1__Standard __1	2__No Insert __2	3__222 O-Ring/Flat Cap __3	4__30 __4	5__0.03 __5	6__FEP Encapsulated Viton __6	7__N/A __7	8__Standard __8
34-10330-923-5-EW	Standard	No Insert	222 O-Ring/Flat Cap	30	0.03	FEP Encapsulated Viton	N/A	Wet Packed	1__Standard __1	2__No Insert __2	3__222 O-Ring/Flat Cap __3	4__30 __4	5__0.03 __5	6__FEP Encapsulated Viton __6	7__N/A __7	8__Wet Packed __8
34-10330-925-5-E	Standard	No Insert	222 O-Ring/Flat Cap	30	0.05	FEP Encapsulated Viton	N/A	Standard	1__Standard __1	2__No Insert __2	3__222 O-Ring/Flat Cap __3	4__30 __4	5__0.05 __5	6__FEP Encapsulated Viton __6	7__N/A __7	8__Standard __8

Show entries

Previous1 2Next

Proflow II-E Pleated Membrane Filter Cartridge | Chemical resistance for ultra pure microelectronics liquids and gases | Product Series

Options

Style

End Cap Material

Length (inch)

Micron Rating (µm)

Seal Material

Secondary Seal

Special Options

Get your Parker account Today!

Proflow II-E Pleated Membrane Filter Cartridge | Chemical resistance for ultra pure microelectronics liquids and gases

Technical Specifications

Full Product Description

Related Documents

Recommended