Proflow II-G Pleated Membrane Filter Cartridge | Hydrophobic PTFE membrane for gas & solvent purification | Parker NA

Proflow II-G Pleated Membrane Filter Cartridge | Hydrophobic PTFE membrane for gas & solvent purification

Where to Buy

Proflow™ II-G filter cartridges provide an economic alternative for general applications where reliable gas and liquid flow rates are required.

Technical Specifications

Brand: Parker
Industry: Microelectronics
Function: Clarification, Prefiltration, Polishing
Media: PTFE
Filter Construction: Pleated Membrane
Outside Diameter: 2.75 inch
End Cap Configuration: Polypropylene
Core Type: Polypropylene
Hose Reinforcement Material & Structure: Polypropylene
Flow Rate: 1.2 gal/min (gpm/psid) per 10 inch Cartridge Equivalent for 0.1 Micron, 2.5 gal/min (gpm/psid) per 10 inch Cartridge Equivalent for 0.2 Micron, 5.1 gal/min (gpm/psid) per 10 inch Cartridge Equivalent for 0.45 Micron, 6.2 gal/min (gpm/psid) per 10 inch Cartridge Equivalent for 1 Micron, 0.6 gal/min (gpm/psid) per 10 inch Cartridge Equivalent

Safety Warning

Full Product Description

Proflow™ II-G filter cartridges provide an economic alternative for general applications where reliable gas and liquid flow rates are required. With 5.6 square feet of expanded PTFE membrane, Proflow II-G filter is a highly efficient hydrophobic barrier, for the production of dry gas, and will effectively purify aggressive liquids and organic solvents.
Proflow II-G cartridges are manufactured under cleanroom conditions and integrity tested before shipment to assure consistent performance and quality.
Features/Benefits
• Reliable air and liquid flow rates for effective performance
• Broad chemical compatibility enables use in many applications
• Broad range of micron ratings for user convenience
• Superior hydrophobicity for long life in vent/air applications
• Integrity tested to ensure quality

Applications
• Photoresists Filtration
• Compressed gas Filtration
• Filtration for Non-sterile venting
• Electronic grade solvent Filtration
• Hot deionized water Filtration (less than 80°C)

Related Documents

Literature and Reference Materials
Filtration Product Linecard for Industrial Applications--GL_IP_LC
Filtration Product Linecard for Microelectronic Applications
Proflow II-G PTFE Membrane Filter Cartridge Data Sheet
[PRODUCT GUIDE] Filter End Caps

Share / Email

Showing 1 to 80 of 80 entries

Products	Options	Style	End Cap Material	Length (inch)	Micron Rating (µm)	Seal Material	Secondary Seal	Options	Style	End Cap Material	Length (inch)	Micron Rating (µm)	Seal Material	Secondary Seal
34-10230-001-6-G	Standard	No Insert	226 O-Ring/Flat Cap	30	0.1	FEP Encapsulated Silicone	N/A	1__Standard __1	2__No Insert __2	3__226 O-Ring/Flat Cap __3	4__30 __4	5__0.1 __5	6__FEP Encapsulated Silicone __6	7__N/A __7
34-10310-001-5-G	Standard	No Insert	222 O-Ring/Flat Cap	10	0.1	FEP Encapsulated Viton	N/A	1__Standard __1	2__No Insert __2	3__222 O-Ring/Flat Cap __3	4__10 __4	5__0.1 __5	6__FEP Encapsulated Viton __6	7__N/A __7
34-10320-001-5-G	Standard	No Insert	222 O-Ring/Flat Cap	20	0.1	FEP Encapsulated Viton	N/A	1__Standard __1	2__No Insert __2	3__222 O-Ring/Flat Cap __3	4__20 __4	5__0.1 __5	6__FEP Encapsulated Viton __6	7__N/A __7
34-10330-001-4-G	Standard	No Insert	222 O-Ring/Flat Cap	30	0.1	Viton	N/A	1__Standard __1	2__No Insert __2	3__222 O-Ring/Flat Cap __3	4__30 __4	5__0.1 __5	6__Viton __6	7__N/A __7
34-10610-001-5-G	Standard	No Insert	020 Internal O-Ring/Flat Cap	10	0.1	FEP Encapsulated Viton	N/A	1__Standard __1	2__No Insert __2	3__020 Internal O-Ring/Flat Cap __3	4__10 __4	5__0.1 __5	6__FEP Encapsulated Viton __6	7__N/A __7
34-10710-001-2-G	Standard	No Insert	226 O-Ring/Fin	10	0.1	S7442	N/A	1__Standard __1	2__No Insert __2	3__226 O-Ring/Fin __3	4__10 __4	5__0.1 __5	6__S7442 __6	7__N/A __7
34-10810-001-6-G	Standard	No Insert	222 O-Ring/Fin	10	0.1	FEP Encapsulated Silicone	N/A	1__Standard __1	2__No Insert __2	3__222 O-Ring/Fin __3	4__10 __4	5__0.1 __5	6__FEP Encapsulated Silicone __6	7__N/A __7
34-50310-001-2-G	Standard	Encapsulated Stainless Steel	222 O-Ring/Flat Cap	10	0.1	S7442	N/A	1__Standard __1	2__Encapsulated Stainless Steel __2	3__222 O-Ring/Flat Cap __3	4__10 __4	5__0.1 __5	6__S7442 __6	7__N/A __7
34-A0310-001-5-G	Standard	1/2" Shortened 222 Fitting	222 O-Ring/Flat Cap	10	0.1	FEP Encapsulated Viton	N/A	1__Standard __1	2__1/2 Shortened 222 Fitting __2	3__222 O-Ring/Flat Cap __3	4__10 __4	5__0.1 __5	6__FEP Encapsulated Viton __6	7__N/A __7
34-A0320-001-5-G	Standard	1/2" Shortened 222 Fitting	222 O-Ring/Flat Cap	20	0.1	FEP Encapsulated Viton	N/A	1__Standard __1	2__1/2 Shortened 222 Fitting __2	3__222 O-Ring/Flat Cap __3	4__20 __4	5__0.1 __5	6__FEP Encapsulated Viton __6	7__N/A __7
34-10010-002-21-G	Standard	No Insert	DOE (Cuno)	10	0.2	S7442	5mm thick gaskets	1__Standard __1	2__No Insert __2	3__DOE (Cuno) __3	4__10 __4	5__0.2 __5	6__S7442 __6	7__5mm thick gaskets __7
34-10010-002-22-G	Standard	No Insert	DOE (Cuno)	10	0.2	S7442	3mm thick gaskets	1__Standard __1	2__No Insert __2	3__DOE (Cuno) __3	4__10 __4	5__0.2 __5	6__S7442 __6	7__3mm thick gaskets __7
34-10110-002-11-G	Standard	No Insert	DOE	10	0.2	EPDM	5mm thick gaskets	1__Standard __1	2__No Insert __2	3__DOE __3	4__10 __4	5__0.2 __5	6__EPDM __6	7__5mm thick gaskets __7
34-10110-002-21-G	Standard	No Insert	DOE	10	0.2	S7442	5mm thick gaskets	1__Standard __1	2__No Insert __2	3__DOE __3	4__10 __4	5__0.2 __5	6__S7442 __6	7__5mm thick gaskets __7
34-10110-002-41-G	Standard	No Insert	DOE	10	0.2	Viton	5mm thick gaskets	1__Standard __1	2__No Insert __2	3__DOE __3	4__10 __4	5__0.2 __5	6__Viton __6	7__5mm thick gaskets __7
34-10110-002-NN-G	Standard	No Insert	DOE	10	0.2	None	No gasket	1__Standard __1	2__No Insert __2	3__DOE __3	4__10 __4	5__0.2 __5	6__None __6	7__No gasket __7
34-10310-002-1-G	Standard	No Insert	222 O-Ring/Flat Cap	10	0.2	EPDM	N/A	1__Standard __1	2__No Insert __2	3__222 O-Ring/Flat Cap __3	4__10 __4	5__0.2 __5	6__EPDM __6	7__N/A __7
34-10310-002-2-G	Standard	No Insert	222 O-Ring/Flat Cap	10	0.2	S7442	N/A	1__Standard __1	2__No Insert __2	3__222 O-Ring/Flat Cap __3	4__10 __4	5__0.2 __5	6__S7442 __6	7__N/A __7
34-10310-002-4-G	Standard	No Insert	222 O-Ring/Flat Cap	10	0.2	Viton	N/A	1__Standard __1	2__No Insert __2	3__222 O-Ring/Flat Cap __3	4__10 __4	5__0.2 __5	6__Viton __6	7__N/A __7
34-10310-002-5-G	Standard	No Insert	222 O-Ring/Flat Cap	10	0.2	FEP Encapsulated Viton	N/A	1__Standard __1	2__No Insert __2	3__222 O-Ring/Flat Cap __3	4__10 __4	5__0.2 __5	6__FEP Encapsulated Viton __6	7__N/A __7
34-10310-002-6-G	Standard	No Insert	222 O-Ring/Flat Cap	10	0.2	FEP Encapsulated Silicone	N/A	1__Standard __1	2__No Insert __2	3__222 O-Ring/Flat Cap __3	4__10 __4	5__0.2 __5	6__FEP Encapsulated Silicone __6	7__N/A __7
34-10310-002-N-G	Standard	No Insert	222 O-Ring/Flat Cap	10	0.2	None	N/A	1__Standard __1	2__No Insert __2	3__222 O-Ring/Flat Cap __3	4__10 __4	5__0.2 __5	6__None __6	7__N/A __7
34-10320-002-1-G	Standard	No Insert	222 O-Ring/Flat Cap	20	0.2	EPDM	N/A	1__Standard __1	2__No Insert __2	3__222 O-Ring/Flat Cap __3	4__20 __4	5__0.2 __5	6__EPDM __6	7__N/A __7
34-10320-002-2-G	Standard	No Insert	222 O-Ring/Flat Cap	20	0.2	S7442	N/A	1__Standard __1	2__No Insert __2	3__222 O-Ring/Flat Cap __3	4__20 __4	5__0.2 __5	6__S7442 __6	7__N/A __7
34-10610-002-0-G	Standard	No Insert	020 Internal O-Ring/Flat Cap	10	0.2	Buna-N	N/A	1__Standard __1	2__No Insert __2	3__020 Internal O-Ring/Flat Cap __3	4__10 __4	5__0.2 __5	6__Buna-N __6	7__N/A __7
34-10710-002-2-G	Standard	No Insert	226 O-Ring/Fin	10	0.2	S7442	N/A	1__Standard __1	2__No Insert __2	3__226 O-Ring/Fin __3	4__10 __4	5__0.2 __5	6__S7442 __6	7__N/A __7
34-10710-002-4-G	Standard	No Insert	226 O-Ring/Fin	10	0.2	Viton	N/A	1__Standard __1	2__No Insert __2	3__226 O-Ring/Fin __3	4__10 __4	5__0.2 __5	6__Viton __6	7__N/A __7
34-10720-002-2-G	Standard	No Insert	226 O-Ring/Fin	20	0.2	S7442	N/A	1__Standard __1	2__No Insert __2	3__226 O-Ring/Fin __3	4__20 __4	5__0.2 __5	6__S7442 __6	7__N/A __7
34-10720-002-4-G	Standard	No Insert	226 O-Ring/Fin	20	0.2	Viton	N/A	1__Standard __1	2__No Insert __2	3__226 O-Ring/Fin __3	4__20 __4	5__0.2 __5	6__Viton __6	7__N/A __7
34-10810-002-0-G	Standard	No Insert	222 O-Ring/Fin	10	0.2	Buna-N	N/A	1__Standard __1	2__No Insert __2	3__222 O-Ring/Fin __3	4__10 __4	5__0.2 __5	6__Buna-N __6	7__N/A __7
34-10810-002-2-G	Standard	No Insert	222 O-Ring/Fin	10	0.2	S7442	N/A	1__Standard __1	2__No Insert __2	3__222 O-Ring/Fin __3	4__10 __4	5__0.2 __5	6__S7442 __6	7__N/A __7
34-10810-002-5-G	Standard	No Insert	222 O-Ring/Fin	10	0.2	FEP Encapsulated Viton	N/A	1__Standard __1	2__No Insert __2	3__222 O-Ring/Fin __3	4__10 __4	5__0.2 __5	6__FEP Encapsulated Viton __6	7__N/A __7
34-10820-002-1-G	Standard	No Insert	222 O-Ring/Fin	20	0.2	EPDM	N/A	1__Standard __1	2__No Insert __2	3__222 O-Ring/Fin __3	4__20 __4	5__0.2 __5	6__EPDM __6	7__N/A __7
34-10830-002-2-G	Standard	No Insert	222 O-Ring/Fin	30	0.2	S7442	N/A	1__Standard __1	2__No Insert __2	3__222 O-Ring/Fin __3	4__30 __4	5__0.2 __5	6__S7442 __6	7__N/A __7
34-10G20-002-2-G	Standard	No Insert	120 Internal/Recessed End Cap	20	0.2	S7442	N/A	1__Standard __1	2__No Insert __2	3__120 Internal/Recessed End Cap __3	4__20 __4	5__0.2 __5	6__S7442 __6	7__N/A __7
34-10G30-002-1-G	Standard	No Insert	120 Internal/Recessed End Cap	30	0.2	EPDM	N/A	1__Standard __1	2__No Insert __2	3__120 Internal/Recessed End Cap __3	4__30 __4	5__0.2 __5	6__EPDM __6	7__N/A __7
34-10H10-002-1-G	Standard	No Insert	213 O-Ring/Recessed End Cap	10	0.2	EPDM	N/A	1__Standard __1	2__No Insert __2	3__213 O-Ring/Recessed End Cap __3	4__10 __4	5__0.2 __5	6__EPDM __6	7__N/A __7
34-10H10-002-2-G	Standard	No Insert	213 O-Ring/Recessed End Cap	10	0.2	S7442	N/A	1__Standard __1	2__No Insert __2	3__213 O-Ring/Recessed End Cap __3	4__10 __4	5__0.2 __5	6__S7442 __6	7__N/A __7
34-10H10-002-4-G	Standard	No Insert	213 O-Ring/Recessed End Cap	10	0.2	Viton	N/A	1__Standard __1	2__No Insert __2	3__213 O-Ring/Recessed End Cap __3	4__10 __4	5__0.2 __5	6__Viton __6	7__N/A __7
34-10H20-002-1-G	Standard	No Insert	213 O-Ring/Recessed End Cap	20	0.2	EPDM	N/A	1__Standard __1	2__No Insert __2	3__213 O-Ring/Recessed End Cap __3	4__20 __4	5__0.2 __5	6__EPDM __6	7__N/A __7
34-10H20-002-2-G	Standard	No Insert	213 O-Ring/Recessed End Cap	20	0.2	S7442	N/A	1__Standard __1	2__No Insert __2	3__213 O-Ring/Recessed End Cap __3	4__20 __4	5__0.2 __5	6__S7442 __6	7__N/A __7
34-50220-002-2-G	Standard	Encapsulated Stainless Steel	226 O-Ring/Flat Cap	20	0.2	S7442	N/A	1__Standard __1	2__Encapsulated Stainless Steel __2	3__226 O-Ring/Flat Cap __3	4__20 __4	5__0.2 __5	6__S7442 __6	7__N/A __7
34-50310-002-0-G	Standard	Encapsulated Stainless Steel	222 O-Ring/Flat Cap	10	0.2	Buna-N	N/A	1__Standard __1	2__Encapsulated Stainless Steel __2	3__222 O-Ring/Flat Cap __3	4__10 __4	5__0.2 __5	6__Buna-N __6	7__N/A __7
34-50310-002-5-G	Standard	Encapsulated Stainless Steel	222 O-Ring/Flat Cap	10	0.2	FEP Encapsulated Viton	N/A	1__Standard __1	2__Encapsulated Stainless Steel __2	3__222 O-Ring/Flat Cap __3	4__10 __4	5__0.2 __5	6__FEP Encapsulated Viton __6	7__N/A __7
34-50710-002-4-G	Standard	Encapsulated Stainless Steel	226 O-Ring/Fin	10	0.2	Viton	N/A	1__Standard __1	2__Encapsulated Stainless Steel __2	3__226 O-Ring/Fin __3	4__10 __4	5__0.2 __5	6__Viton __6	7__N/A __7
34-50730-002-2-G	Standard	Encapsulated Stainless Steel	226 O-Ring/Fin	30	0.2	S7442	N/A	1__Standard __1	2__Encapsulated Stainless Steel __2	3__226 O-Ring/Fin __3	4__30 __4	5__0.2 __5	6__S7442 __6	7__N/A __7
34-50810-002-2-G	Standard	Encapsulated Stainless Steel	222 O-Ring/Fin	10	0.2	S7442	N/A	1__Standard __1	2__Encapsulated Stainless Steel __2	3__222 O-Ring/Fin __3	4__10 __4	5__0.2 __5	6__S7442 __6	7__N/A __7
34-50820-002-2-G	Standard	Encapsulated Stainless Steel	222 O-Ring/Fin	20	0.2	S7442	N/A	1__Standard __1	2__Encapsulated Stainless Steel __2	3__222 O-Ring/Fin __3	4__20 __4	5__0.2 __5	6__S7442 __6	7__N/A __7
34-60310-002-2-G	Standard	Encapsulated Polysulfone	222 O-Ring/Flat Cap	10	0.2	S7442	N/A	1__Standard __1	2__Encapsulated Polysulfone __2	3__222 O-Ring/Flat Cap __3	4__10 __4	5__0.2 __5	6__S7442 __6	7__N/A __7
34-60710-002-5-G	Standard	Encapsulated Polysulfone	226 O-Ring/Fin	10	0.2	FEP Encapsulated Viton	N/A	1__Standard __1	2__Encapsulated Polysulfone __2	3__226 O-Ring/Fin __3	4__10 __4	5__0.2 __5	6__FEP Encapsulated Viton __6	7__N/A __7
34-60720-002-1-G	Standard	Encapsulated Polysulfone	226 O-Ring/Fin	20	0.2	EPDM	N/A	1__Standard __1	2__Encapsulated Polysulfone __2	3__226 O-Ring/Fin __3	4__20 __4	5__0.2 __5	6__EPDM __6	7__N/A __7
34-A0310-002-5-G	Standard	1/2" Shortened 222 Fitting	222 O-Ring/Flat Cap	10	0.2	FEP Encapsulated Viton	N/A	1__Standard __1	2__1/2 Shortened 222 Fitting __2	3__222 O-Ring/Flat Cap __3	4__10 __4	5__0.2 __5	6__FEP Encapsulated Viton __6	7__N/A __7
34-A0320-002-5-G	Standard	1/2" Shortened 222 Fitting	222 O-Ring/Flat Cap	20	0.2	FEP Encapsulated Viton	N/A	1__Standard __1	2__1/2 Shortened 222 Fitting __2	3__222 O-Ring/Flat Cap __3	4__20 __4	5__0.2 __5	6__FEP Encapsulated Viton __6	7__N/A __7
34-A0330-002-5-G	Standard	1/2" Shortened 222 Fitting	222 O-Ring/Flat Cap	30	0.2	FEP Encapsulated Viton	N/A	1__Standard __1	2__1/2 Shortened 222 Fitting __2	3__222 O-Ring/Flat Cap __3	4__30 __4	5__0.2 __5	6__FEP Encapsulated Viton __6	7__N/A __7
34-A0R10-002-N-G	Standard	1/2" Shortened 222 Fitting	222 O-Ring/Recessed End Cap	10	0.2	None	N/A	1__Standard __1	2__1/2 Shortened 222 Fitting __2	3__222 O-Ring/Recessed End Cap __3	4__10 __4	5__0.2 __5	6__None __6	7__N/A __7
34-10110-004-NN-G	Standard	No Insert	DOE	10	0.45	None	No gasket	1__Standard __1	2__No Insert __2	3__DOE __3	4__10 __4	5__0.45 __5	6__None __6	7__No gasket __7
34-10310-004-5-G	Standard	No Insert	222 O-Ring/Flat Cap	10	0.45	FEP Encapsulated Viton	N/A	1__Standard __1	2__No Insert __2	3__222 O-Ring/Flat Cap __3	4__10 __4	5__0.45 __5	6__FEP Encapsulated Viton __6	7__N/A __7
34-10710-004-2-G	Standard	No Insert	226 O-Ring/Fin	10	0.45	S7442	N/A	1__Standard __1	2__No Insert __2	3__226 O-Ring/Fin __3	4__10 __4	5__0.45 __5	6__S7442 __6	7__N/A __7
34-10810-004-2-G	Standard	No Insert	222 O-Ring/Fin	10	0.45	S7442	N/A	1__Standard __1	2__No Insert __2	3__222 O-Ring/Fin __3	4__10 __4	5__0.45 __5	6__S7442 __6	7__N/A __7
34-A0310-004-5-G	Standard	1/2" Shortened 222 Fitting	222 O-Ring/Flat Cap	10	0.45	FEP Encapsulated Viton	N/A	1__Standard __1	2__1/2 Shortened 222 Fitting __2	3__222 O-Ring/Flat Cap __3	4__10 __4	5__0.45 __5	6__FEP Encapsulated Viton __6	7__N/A __7
34-A0320-004-5-G	Standard	1/2" Shortened 222 Fitting	222 O-Ring/Flat Cap	20	0.45	FEP Encapsulated Viton	N/A	1__Standard __1	2__1/2 Shortened 222 Fitting __2	3__222 O-Ring/Flat Cap __3	4__20 __4	5__0.45 __5	6__FEP Encapsulated Viton __6	7__N/A __7
34-A0330-004-5-G	Standard	1/2" Shortened 222 Fitting	222 O-Ring/Flat Cap	30	0.45	FEP Encapsulated Viton	N/A	1__Standard __1	2__1/2 Shortened 222 Fitting __2	3__222 O-Ring/Flat Cap __3	4__30 __4	5__0.45 __5	6__FEP Encapsulated Viton __6	7__N/A __7
34-10010-010-11-G	Standard	No Insert	DOE (Cuno)	10	1	EPDM	5mm thick gaskets	1__Standard __1	2__No Insert __2	3__DOE (Cuno) __3	4__10 __4	5__1 __5	6__EPDM __6	7__5mm thick gaskets __7
34-10110-010-11-G	Standard	No Insert	DOE	10	1	EPDM	5mm thick gaskets	1__Standard __1	2__No Insert __2	3__DOE __3	4__10 __4	5__1 __5	6__EPDM __6	7__5mm thick gaskets __7
34-10120-010-41-G	Standard	No Insert	DOE	20	1	Viton	5mm thick gaskets	1__Standard __1	2__No Insert __2	3__DOE __3	4__20 __4	5__1 __5	6__Viton __6	7__5mm thick gaskets __7
34-10230-010-2-G	Standard	No Insert	226 O-Ring/Flat Cap	30	1	S7442	N/A	1__Standard __1	2__No Insert __2	3__226 O-Ring/Flat Cap __3	4__30 __4	5__1 __5	6__S7442 __6	7__N/A __7
34-10320-010-4-G	Standard	No Insert	222 O-Ring/Flat Cap	20	1	Viton	N/A	1__Standard __1	2__No Insert __2	3__222 O-Ring/Flat Cap __3	4__20 __4	5__1 __5	6__Viton __6	7__N/A __7
34-10320-010-6-G	Standard	No Insert	222 O-Ring/Flat Cap	20	1	FEP Encapsulated Silicone	N/A	1__Standard __1	2__No Insert __2	3__222 O-Ring/Flat Cap __3	4__20 __4	5__1 __5	6__FEP Encapsulated Silicone __6	7__N/A __7
34-10720-010-5-G	Standard	No Insert	226 O-Ring/Fin	20	1	FEP Encapsulated Viton	N/A	1__Standard __1	2__No Insert __2	3__226 O-Ring/Fin __3	4__20 __4	5__1 __5	6__FEP Encapsulated Viton __6	7__N/A __7
34-10810-010-5-G	Standard	No Insert	222 O-Ring/Fin	10	1	FEP Encapsulated Viton	N/A	1__Standard __1	2__No Insert __2	3__222 O-Ring/Fin __3	4__10 __4	5__1 __5	6__FEP Encapsulated Viton __6	7__N/A __7
34-10820-010-4-G	Standard	No Insert	222 O-Ring/Fin	20	1	Viton	N/A	1__Standard __1	2__No Insert __2	3__222 O-Ring/Fin __3	4__20 __4	5__1 __5	6__Viton __6	7__N/A __7
34-60710-010-5-G	Standard	Encapsulated Polysulfone	226 O-Ring/Fin	10	1	FEP Encapsulated Viton	N/A	1__Standard __1	2__Encapsulated Polysulfone __2	3__226 O-Ring/Fin __3	4__10 __4	5__1 __5	6__FEP Encapsulated Viton __6	7__N/A __7
34-A0310-010-1-G	Standard	1/2" Shortened 222 Fitting	222 O-Ring/Flat Cap	10	1	EPDM	N/A	1__Standard __1	2__1/2 Shortened 222 Fitting __2	3__222 O-Ring/Flat Cap __3	4__10 __4	5__1 __5	6__EPDM __6	7__N/A __7
34-A0310-010-5-G	Standard	1/2" Shortened 222 Fitting	222 O-Ring/Flat Cap	10	1	FEP Encapsulated Viton	N/A	1__Standard __1	2__1/2 Shortened 222 Fitting __2	3__222 O-Ring/Flat Cap __3	4__10 __4	5__1 __5	6__FEP Encapsulated Viton __6	7__N/A __7
34-A0330-010-5-G	Standard	1/2" Shortened 222 Fitting	222 O-Ring/Flat Cap	30	1	FEP Encapsulated Viton	N/A	1__Standard __1	2__1/2 Shortened 222 Fitting __2	3__222 O-Ring/Flat Cap __3	4__30 __4	5__1 __5	6__FEP Encapsulated Viton __6	7__N/A __7
34-10310-925-5-G	Standard	No Insert	222 O-Ring/Flat Cap	10	0.05	FEP Encapsulated Viton	N/A	1__Standard __1	2__No Insert __2	3__222 O-Ring/Flat Cap __3	4__10 __4	5__0.05 __5	6__FEP Encapsulated Viton __6	7__N/A __7
34-10320-925-5-G	Standard	No Insert	222 O-Ring/Flat Cap	20	0.05	FEP Encapsulated Viton	N/A	1__Standard __1	2__No Insert __2	3__222 O-Ring/Flat Cap __3	4__20 __4	5__0.05 __5	6__FEP Encapsulated Viton __6	7__N/A __7
34-10330-925-4-G	Standard	No Insert	222 O-Ring/Flat Cap	30	0.05	Viton	N/A	1__Standard __1	2__No Insert __2	3__222 O-Ring/Flat Cap __3	4__30 __4	5__0.05 __5	6__Viton __6	7__N/A __7
34-A0320-925-5-G	Standard	1/2" Shortened 222 Fitting	222 O-Ring/Flat Cap	20	0.05	FEP Encapsulated Viton	N/A	1__Standard __1	2__1/2 Shortened 222 Fitting __2	3__222 O-Ring/Flat Cap __3	4__20 __4	5__0.05 __5	6__FEP Encapsulated Viton __6	7__N/A __7
34-A0R10-925-N-G	Standard	1/2" Shortened 222 Fitting	222 O-Ring/Recessed End Cap	10	0.05	None	N/A	1__Standard __1	2__1/2 Shortened 222 Fitting __2	3__222 O-Ring/Recessed End Cap __3	4__10 __4	5__0.05 __5	6__None __6	7__N/A __7

Show entries

Previous1Next

Proflow II-G Pleated Membrane Filter Cartridge | Hydrophobic PTFE membrane for gas & solvent purification | Product Series

Options

Style

End Cap Material

Length (inch)

Micron Rating (µm)

Seal Material

Secondary Seal

Get your Parker account Today!

Proflow II-G Pleated Membrane Filter Cartridge | Hydrophobic PTFE membrane for gas & solvent purification

Technical Specifications

Full Product Description

Related Documents

Recommended