Conjuntos de mangueras

Manguera de fijación automática Parker Legris diseñada según la norma CNOMO E07.21.115N*. Esta gama debe utilizarse con los conectores serrados Legris y proporciona fiabilidad de tecnología de fijación automática y simplicidad de instalación.

Liquid Petroleum Gas LPG Hose Factory Assemblies are designed for delivery, supply and transfer of propane in commercial and industrial applications to -40°F and 350 psi, Series 7132

Parker Legris offers two grades of PVC hose with textile braid which cover a wide range of industrial applications for the transportation of various fluids.

GST II Air Hose Factory Assemblies are designed for transfer of air for shop use and to power pneumatic tools to 212°F and 300 psi, Series 7092/7093

Hurricane Pressure Washer Hose Factory Assemblies are designed for high pressure service in applications to 250°F and 3000 psi, Series 7258

Contractor's Water Hose Factory Assemblies are designed to transfer water for clean-up, wash down and general service applications to 180°F and 100 psi, Series 7055

Premium Contractor's Water Hose Factory Assemblies are designed to transfer water for clean-up, wash down and general service applications to 180°F and 125 psi, Series PR

X-treme Low Temperature Liquid Petroleum Gas LPG Hose Factory Assemblies are designed for delivery, supply and transfer of propane in commercial and industrial applications to -65°F and 350 psi, Series 7132XTC

Premium Hot Water Hose Factory Assemblies are designed to transfer hot water for clean-up, wash down and general service applications to 212°F and 125 psi, Series HWR

GST II Service Station Air Hose Factory Assemblies are designed for transfer of air from garage and service station air compressors and dispensers to 212°F and 300 psi, Series 7092

RGR Water Hose Assemblies are designed for low pressure water service in applications to 180°F and 125 psi, Series RGR

PTFE High Pressure Hydraulic Hose Assemblies have exceptional chemical compatibility, resist moisture, and handle pressures up to 5,500 psi. They are designed for high temp hydraulics,chemical transfer, and compressor discharge applications.

Note: This product is no longer available – please refer to the “Recommended Products” section of this page for alternative products, or contact us for further assistance.

Flare-Seal® assemblies increase flow by providing smooth, clean connections and preventing bacterial entrapment. They are available with a stainless steel braid, polypropylene braid or other optional braids for fluid handling and paint applications.

PTFE hose with a nomex braid eliminates RFI  issues and theyare also less susceptible to cracking from stress or flexing than metal hose assemblies.

GlobalCore hose assemblies simplify specifications for OEMs and end users. Featuring six hoses, four cover options, and two fitting series, all available through a network of distributors. Any pressure. Any project. One solution. GlobalCore.

SCR Hose Assemblies are designed for heating and conveying DEF (Diesel Exhaust Fluid; or AdBlue) throughout Selective Catalytic Reduction (SCR) systems. Parker's hoses are uniquely made with both an extruded sheath and an overmold for protection.

PTFE hose assemblies are extremely chemical and corrosion resistant and offer a low coefficient of friction to assist with flow. Most 919 hoses handle temperatures up to 450°F.  Jacketed hoses vary in temperature.

Non-Marring, abrasion resistant polyurethane cover has very low, to near zero, parts per billion emissions of volatile organic compounds. Cover protects the stainless steel wire reinforcement against wear, fraying and contaminants.

Nota: Este producto ya no está disponible - por favor, consulte la sección "Soporte del Producto" o "Productos recomendados" de esta página para obtener detalles sobre cualquier producto alternativo, o contacte con nosotros para obtener más ayuda.

Note: This product is no longer available - please contact us for further assistance

Softwall Farm Pump Hose Factory Assemblies are designed to transfer refined fuels from gravity-feed storage tanks or manual dispensers to 180°F and 50 psi, Series 7174

Parker offers popular configurations of factory made hose assemblies for media such as air brake, fuel dispensers, propane, shop air, water and welding service.

hose-assemblies

<article class="ph-card-basic">
	<header class="ph-card-basic__header">
		<h2 class="ph-card-basic__title">Consiga su cuenta de Parker hoy mismo!</h2>
	</header>
	<div class="ph-card-basic__body">
		<p>Cree una cuenta para gestionar todo lo que haga con Parker, desde sus preferencias de compra hasta su acceso a la aplicación.</p>
	</div>
	<footer class="ph-card-basic__footer">
		<a href="[registerUrl]" class="button accent-button round-button small-button">Regístrese ahora</a>
	</footer>
</article>