Suuntaventtiilit

Parker’s VP120 series is a sectional, pressure compensated load sensing directional control valve for mobile machines.

The base mounted H Series ISO -1 & -2 valve series covers the 5 ISO sizes (02 to 3) with Qn from 540 to 5890 Nl/mn. The H Universal manifold offers the opportunity to mix sizes from 02 to 2 and offers the flexibility for pneumatic zones in the manifold.

The H Series ISO Valve is a family of base mounted valves available in five size ranges (Sizes 02, 01, 1, 2 and 3) with flow from 0.55 to 6 Cv. The ability to mix sizes on one manifold adds space and cost savings to machine design.

Parkerin 2-tie-istukkaventtiilit sallivat virtaussuunnan yhdellä suunnalla alhaisella vuodolla ja vapaan virtauksen vastasuuntaan. Saatavilla normaalisti auki/suljettu -versioina. Kestää jopa 350 baarin paineen ja 260 l/min virtaaman.

Parkerin uudet kompaktit D1FC (NG06) / D3FC (NG10) edustavat huipputekniikkaa, tarjoten optimoidun prosessinopeuden, korkean dynamiikan ja virtauksen eri sovelluksiin. Saatavilla myös EtherCAT®-liitännällä, joka mahdollistaa nopean datansiirron ja l

The ISO H-series, size 01 and 02, is a dual 3/2, 5/2, or 5/3 subbase valve. It can be plugin or non-plugin, and is mounted on a subbase or manifold. Electrical connection options are terminal block, 6" lead wires, and collective wiring / fieldbus.

D1VW NG06 (CETOP 03) on on/off-venttiili, joka tarjoaa korkeat toiminnalliset rajat ja energiatehokkaan matalan painehäviön. Saatavilla pehmeällä vaihtotoiminnolla tai ATEX/IECEx-suojausversiossa.

This range of valves has patented seal wear compensating technology for reliable and durable sealing, protecting any system whether under pressure or vacuum.

Parker's K220LS mobile valve is characterized by industry leading properties regarding robustness, control precision and energy efficiency.Parker K220LS is a sectional-built, load sensing, directional control valve for mobile machinery.

The DX ISOMAX series, size 01 and 02, is a 5/2 or 5/3 subbase valve. They are non-plugin only, have a ceramic seat for resistance to contamination, and can be mounted on a subbase or manifold. Each coil is wired with a 15 mm 3 pin DIN connector.

The NG10 direct operated directional control valve series D3W provides high functional limits up to 150 l/min in combination with a low, energy saving pressure drop.

The DX ISOMAX series, size 1, 2, and 3, is a 5/2 or 5/3 subbase valve. They are non-plugin only, have a ceramic seat for resistance to contamination, and can be mounted on a subbase or manifold. Each coil is wired with a 30 mm 3 pin DIN connector.

Direct operated DFplus control valves D1FP in NG06 (CETOP 03) and D3FP in NG10 (CETOP 05) meet highest requirements in terms of dynamics combined with high flow, optionally with EtherCAT interface. The preferred choice for demanding hydraulic controls!

Parker's thermal bypass valves modulate fluid temperature by shifting return line flow through the cooler, or bypassing it directly to the reservoir.

Parker L90LS mobile valve is characterized by industry leading properties regarding robustness, control precision and energy efficiency. Parker L90LS is a sectional-built, load sensing, directional control valve for mobile machinery.

Viking Xtreme is a harsh industrial inline valve. It is a Manual, Air or solenoid piloted valve with mobile rated coils. Bar manifold options . Salt spray & vibration resistant. Temp -40°C to +70°C, pressure vac to 16 bar. Port sizes: 1/8 to 1/2.

The Viking Lite is a general inline industrial valve. It is solenoid air piloted with bar manifold options. Temp: -10°C to +50°C. Pressure : 1.5 to 10 bar. Port sizes:  1/8 to 3/8.

Parker has a large selection of direct acting 4-way, 3-position spool-type solenoid valves to cover a wide range of flow requirements up to 57 lpm (15 gpm) and pressures as high as 350 bar (5000 psi); closed, open, float, and tandem centers available.

Parker's proven standard performance pilot operated proportional DC valves series D*1FB with onboard electronics are universally applicable and feature progressive flow characteristics for sensitive flow rate adjustment.

Robust and heavy duty modular valves: The S9 range of standard and special valves are designed for durability, versatility and efficiency for the most diverse pneumatic requirements.

Setting standards for pilot operated on-/off valves in terms of functional limits and pressure drop, Parker's series D31DW, D31NW, D*1VW are suitable for practically any industrial application. Optionally available as ex-proof version.

With their push-in connections, these polymer lightweight ball valves allow for a significant reduction in installation time while offering full flow capability and compact dimensions.

Parker M402LS mobile valve is characterized by industry leading properties regarding robustness, control precision and energy efficiency.Parker M402LS is a monoblock valve designed for mobile machinery used in load sensing systems.

The Moduflex series is an air piloted stacking valve. Functions are 4/2, 3/2, and dual 3/2. S series, T series, and V series wiring configurations. V series collective wiring- 20 and 25 pin Dsub, IO-Link and Industrial Ethernet protocols.

The H Micro series is an air piloted subbase valve. It is plugin only and is mounted on a manifold base which holds 4 valves. Functions are 4/2, 4/3, and dual 3/2. The manifold bases contain circuit boards for collective wiring / fieldbus.

directional-control-valves-1

<article class="ph-card-basic">
	<header class="ph-card-basic__header">
		<h2 class="ph-card-basic__title">Get your Parker account Today!</h2>
	</header>
	<div class="ph-card-basic__body">
		<p>Create one account to manage everything you do with Parker, from your shopping preferences to your application access.</p>
	</div>
	<footer class="ph-card-basic__footer">
		<a href="[registerUrl]" class="button accent-button round-button small-button">Register now</a>
	</footer>
</article>

This stoer is mainly accessed by Finland users