Venttiilien lisävarusteet/sarjat

Parker's broad range of solenoid and proportional cartridge valves are complemented by a wide selection of options in the Super Coil series of IP69K DC and AC coils.  Multiple voltage and termination styles are standard cataloged options.

Parker’s broad range of solenoid and proportional cartridge valves are complemented by a wide selection of options in the Super Coil series of IP69K DC and AC coils.  Multiple voltage and termination styles are standard cataloged options.

Parkers PLC direct acting pressure relief valve has excellent performance characteristics. PLC is built up as a cartridge and protects the components in a hydraulic system from pressure peaks.

Parker C-Series Evaluation Manifolds are perfect for sample testing and come with all accessories necessary for installation.

Parker C-Series Replacement Screws for C7, C15, or C21 miniature cartridge valves.

PXB-series control and process duty valve switches can provide dual pneumatic and electrical output signals. Designed to fit the standard electrical Ø22mm knock out, a variety of buttons and switch actuators options are available.

Parker C-Series Replacement O-Rings for C-Series miniature cartridge valves create a perfect seal with manifolds manufactured in accordance to Parker recommendations.

PXC-series compact 3/2 normally closed metal bodied pneumatic valve limit switches feature push-in air connections and have been designed for the process duty cycle with high durability. Ideal for the process or packaging industry.

PXV-series visual indicators give an immediate and clear information about pressure actuation. Available in Ø22mm and Ø30mm sizes, with a large choice of colours.

Parker’s C-Series Replacement Clips designed to work with Parker’s C-Series C7, C15, and C21 miniature cartridge valves.

Parker pressure intensifiers series SD500 are particularly suitable for machine tools. They enable a cost-effective system solution especially in clamping applications.

Parker’s SRS Series single station aluminum manifold has .078” barbs installed for connection to 5/64” ID tubing. The FKM Gasket (195-000139-001) and 2 mounting screws (191-000100-009) are required and sold separately.

Electro-hydraulic pressure switches series PSB are robust, long-life high performance devices that provide an electrical signal when sensed pressure rises above or falls below the selected setting. The maximum operating pressure is 315 bar.

Subplates series SPD are used for directional control valves with BSPP threads. They are available in different versions from size NG06/CETOP 03 to NG25/CETOP 08.

Parker’s 1 inch DS Coil is a high power coil often used with 12, 16, and 20 size proportional or on-off solenoid cartridges.  Multiple voltage and termination styles are standard cataloged options.

REGIONAL ONLY - Parker cavity plugs are a versatile option and can be used in any manifold where one valve serves several machines and/or options; either blocking flow completely or rerouting flow as needed.

Subplates series SPP are used for pressure valves with BSPP threads. They are available in different versions from size NG10 to NG32.

The cover plates series D51 in 3 different variants for NG06 / CETOP 03 and NG10 / CETOP 05 are part of Parker's comprehensive modular system for vertical stackings.

Pressure gauge selector valves series WM allow to connect up to 5 or 10 measuring points to one pressure gauge. When measuring is completed, the gauge is pressure-relieved to prevent it from being damaged by pressure surges.

The sandwich plates series H06 in 8 different variants for NG06 / CETOP 03 are part of Parker's comprehensive modular system for vertical stackings.

Adaptor plates series PADA  for NG10 to NG06 are used to combine cartridge components like covers and pilot valves in different sizes. They are available in two versions: connection A-B / B-A or connection A-A / B-B.

Sandwich plates series CS06 for NG06 / CETOP 03 offer a wide variety of applications, e.g. for vertical stackings. Cover plates series CS06 for NG06 / CETOP 03 may be used to connect porting patterns.

The test unit EX-M05 ValveMaster® is particularly suitable for testing and commissioning of Parker proportional and servo proportional valves with onboard electronics.

Parker sandwich plates series H10 allow energy saving circuits for differential cylinders in combination with various directional control  and proportional DC valves in size NG10 / CETOP 05.

The solid subplate series A102 in size NG10 is used for mounting the proven Parker pressure valves series VB and VM.

valves-accessories-kits

<article class="ph-card-basic">
	<header class="ph-card-basic__header">
		<h2 class="ph-card-basic__title">Get your Parker account Today!</h2>
	</header>
	<div class="ph-card-basic__body">
		<p>Create one account to manage everything you do with Parker, from your shopping preferences to your application access.</p>
	</div>
	<footer class="ph-card-basic__footer">
		<a href="[registerUrl]" class="button accent-button round-button small-button">Register now</a>
	</footer>
</article>

This stoer is mainly accessed by Finland users