The maximum number of products that can be compared is 4. Please refine your selection.
Du fait de labsence dactivité, votre session va bientôt expirer. Cliquez sur OK pour prolonger votre délai de 0 minutes supplémentaires.
Brass Standard Compression Fittings
386135
false
[
]
This item has been successfully added to your list.
Afin de vous offrir la meilleure expérience possible, ce site utilise des cookies. En continuant à utiliser ce site ou en restant sur cette page, vous autorisez l'utilisation de ces cookies, conformément à notre
politique de confidentialité.
Pour en savoir plus et découvrir comment gérer les cookies, cliquez
cliquez ici.
Inch Brass Compression Fittings | Série de produits
var attrArray = new Array();
var attrValueMap = {};
attrValueMap['Taille du raccordement 2'] = '3/8 ';
attrValueMap['Taille du raccordement 1'] = '3/8 ';
attrValueMap['Type de raccordement 1'] = 'Compression ';
attrValueMap['Configuration'] = 'Tube to Pipe ';
attrValueMap['Type de raccordement 2'] = 'Male NPTF ';
attrValueMap['Matériau du corps'] = 'Brass, Forged ';
attrValueMap['Style de produit'] = 'Tank Fitting ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Taille du raccordement 2'] = '1/2 ';
attrValueMap['Type de raccordement 1'] = 'Compression ';
attrValueMap['Taille du raccordement 1'] = '1/2 ';
attrValueMap['Configuration'] = 'Tube to Pipe ';
attrValueMap['Type de raccordement 2'] = 'Male NPTF ';
attrValueMap['Matériau du corps'] = 'Brass, Forged ';
attrValueMap['Style de produit'] = 'Tank Fitting ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Taille du raccordement 2'] = '3/4 ';
attrValueMap['Taille du raccordement 1'] = '5/8 ';
attrValueMap['Type de raccordement 1'] = 'Compression ';
attrValueMap['Configuration'] = 'Tube to Pipe ';
attrValueMap['Type de raccordement 2'] = 'Male NPTF ';
attrValueMap['Matériau du corps'] = 'Brass, Forged ';
attrValueMap['Style de produit'] = 'Connector ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Taille du raccordement 2'] = '3/8 ';
attrValueMap['Taille du raccordement 1'] = '5/8 ';
attrValueMap['Type de raccordement 1'] = 'Compression ';
attrValueMap['Configuration'] = 'Tube to Pipe ';
attrValueMap['Type de raccordement 2'] = 'Male NPTF ';
attrValueMap['Matériau du corps'] = 'Brass, Forged ';
attrValueMap['Style de produit'] = 'Connector ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Taille du raccordement 2'] = '1/2 ';
attrValueMap['Taille du raccordement 1'] = '5/8 ';
attrValueMap['Type de raccordement 1'] = 'Compression ';
attrValueMap['Configuration'] = 'Tube to Pipe ';
attrValueMap['Type de raccordement 2'] = 'Male NPTF ';
attrValueMap['Matériau du corps'] = 'Brass, Forged ';
attrValueMap['Style de produit'] = 'Connector ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Taille du raccordement 1'] = '3/4 ';
attrValueMap['Taille du raccordement 2'] = '3/4 ';
attrValueMap['Type de raccordement 1'] = 'Compression ';
attrValueMap['Configuration'] = 'Tube to Pipe ';
attrValueMap['Type de raccordement 2'] = 'Male NPTF ';
attrValueMap['Matériau du corps'] = 'Brass, Forged ';
attrValueMap['Style de produit'] = 'Connector ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Taille du raccordement 1'] = '3/4 ';
attrValueMap['Taille du raccordement 2'] = '1/2 ';
attrValueMap['Type de raccordement 1'] = 'Compression ';
attrValueMap['Configuration'] = 'Tube to Pipe ';
attrValueMap['Type de raccordement 2'] = 'Male NPTF ';
attrValueMap['Matériau du corps'] = 'Brass, Forged ';
attrValueMap['Style de produit'] = 'Connector ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Taille du raccordement 1'] = '7/8 ';
attrValueMap['Taille du raccordement 2'] = '3/4 ';
attrValueMap['Type de raccordement 1'] = 'Compression ';
attrValueMap['Configuration'] = 'Tube to Pipe ';
attrValueMap['Type de raccordement 2'] = 'Male NPTF ';
attrValueMap['Matériau du corps'] = 'Brass, Forged ';
attrValueMap['Style de produit'] = 'Connector ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Taille du raccordement 1'] = '1/8 ';
attrValueMap['Type de raccordement 1'] = 'Compression ';
attrValueMap['Taille du raccordement 2'] = '1/16 ';
attrValueMap['Configuration'] = 'Tube to Pipe ';
attrValueMap['Type de raccordement 2'] = 'Male NPTF ';
attrValueMap['Matériau du corps'] = 'Brass, Forged ';
attrValueMap['Style de produit'] = 'Connector ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Taille du raccordement 1'] = '3/4 ';
attrValueMap['Forme'] = 'Elbow 90° ';
attrValueMap['Taille du raccordement 2'] = '1/2 ';
attrValueMap['Type de raccordement 1'] = 'Compression ';
attrValueMap['Configuration'] = 'Tube to Pipe ';
attrValueMap['Type de raccordement 2'] = 'Male NPTF ';
attrValueMap['Matériau du corps'] = 'Brass, Forged ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Forme'] = 'Elbow 90° ';
attrValueMap['Taille du raccordement 1'] = '1/8 ';
attrValueMap['Type de raccordement 1'] = 'Compression ';
attrValueMap['Taille du raccordement 2'] = '1/16 ';
attrValueMap['Configuration'] = 'Tube to Pipe ';
attrValueMap['Type de raccordement 2'] = 'Male NPTF ';
attrValueMap['Matériau du corps'] = 'Brass, Forged ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Forme'] = 'Elbow 90° ';
attrValueMap['Type de raccordement 1'] = 'Compression ';
attrValueMap['Taille du raccordement 2'] = '1/16 ';
attrValueMap['Taille du raccordement 1'] = '3/16 ';
attrValueMap['Configuration'] = 'Tube to Pipe ';
attrValueMap['Type de raccordement 2'] = 'Male NPTF ';
attrValueMap['Matériau du corps'] = 'Brass, Forged ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Forme'] = 'Elbow 90° ';
attrValueMap['Taille du raccordement 2'] = '1/8 ';
attrValueMap['Type de raccordement 1'] = 'Compression ';
attrValueMap['Taille du raccordement 1'] = '3/16 ';
attrValueMap['Configuration'] = 'Tube to Pipe ';
attrValueMap['Type de raccordement 2'] = 'Male NPTF ';
attrValueMap['Matériau du corps'] = 'Brass, Forged ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Taille du raccordement 2'] = '1/4 ';
attrValueMap['Forme'] = 'Elbow 90° ';
attrValueMap['Type de raccordement 1'] = 'Compression ';
attrValueMap['Taille du raccordement 1'] = '3/16 ';
attrValueMap['Configuration'] = 'Tube to Pipe ';
attrValueMap['Type de raccordement 2'] = 'Male NPTF ';
attrValueMap['Matériau du corps'] = 'Brass, Forged ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Forme'] = 'Elbow 90° ';
attrValueMap['Taille du raccordement 1'] = '1/4 ';
attrValueMap['Taille du raccordement 2'] = '1/8 ';
attrValueMap['Type de raccordement 1'] = 'Compression ';
attrValueMap['Configuration'] = 'Tube to Pipe ';
attrValueMap['Type de raccordement 2'] = 'Male NPTF ';
attrValueMap['Matériau du corps'] = 'Brass, Forged ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Taille du raccordement 2'] = '1/4 ';
attrValueMap['Forme'] = 'Elbow 90° ';
attrValueMap['Taille du raccordement 1'] = '1/4 ';
attrValueMap['Type de raccordement 1'] = 'Compression ';
attrValueMap['Configuration'] = 'Tube to Pipe ';
attrValueMap['Type de raccordement 2'] = 'Male NPTF ';
attrValueMap['Matériau du corps'] = 'Brass, Forged ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Forme'] = 'Elbow 90° ';
attrValueMap['Taille du raccordement 1'] = '1/4 ';
attrValueMap['Taille du raccordement 2'] = '3/8 ';
attrValueMap['Type de raccordement 1'] = 'Compression ';
attrValueMap['Configuration'] = 'Tube to Pipe ';
attrValueMap['Type de raccordement 2'] = 'Male NPTF ';
attrValueMap['Matériau du corps'] = 'Brass, Forged ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Taille du raccordement 1'] = '5/16 ';
attrValueMap['Forme'] = 'Elbow 90° ';
attrValueMap['Taille du raccordement 2'] = '1/8 ';
attrValueMap['Type de raccordement 1'] = 'Compression ';
attrValueMap['Configuration'] = 'Tube to Pipe ';
attrValueMap['Type de raccordement 2'] = 'Male NPTF ';
attrValueMap['Matériau du corps'] = 'Brass, Forged ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Taille du raccordement 2'] = '1/4 ';
attrValueMap['Taille du raccordement 1'] = '5/16 ';
attrValueMap['Forme'] = 'Elbow 90° ';
attrValueMap['Type de raccordement 1'] = 'Compression ';
attrValueMap['Configuration'] = 'Tube to Pipe ';
attrValueMap['Type de raccordement 2'] = 'Male NPTF ';
attrValueMap['Matériau du corps'] = 'Brass, Forged ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Taille du raccordement 1'] = '5/16 ';
attrValueMap['Forme'] = 'Elbow 90° ';
attrValueMap['Taille du raccordement 2'] = '3/8 ';
attrValueMap['Type de raccordement 1'] = 'Compression ';
attrValueMap['Configuration'] = 'Tube to Pipe ';
attrValueMap['Type de raccordement 2'] = 'Male NPTF ';
attrValueMap['Matériau du corps'] = 'Brass, Forged ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Taille du raccordement 1'] = '1/8 ';
attrValueMap['Taille du raccordement 2'] = '1/8 ';
attrValueMap['Type de raccordement 1'] = 'Compression ';
attrValueMap['Configuration'] = 'Tube to Pipe ';
attrValueMap['Type de raccordement 2'] = 'Male NPTF ';
attrValueMap['Matériau du corps'] = 'Brass, Forged ';
attrValueMap['Style de produit'] = 'Connector ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Type de raccordement 1'] = 'Compression ';
attrValueMap['Taille du raccordement 2'] = '1/16 ';
attrValueMap['Taille du raccordement 1'] = '3/16 ';
attrValueMap['Configuration'] = 'Tube to Pipe ';
attrValueMap['Type de raccordement 2'] = 'Male NPTF ';
attrValueMap['Matériau du corps'] = 'Brass, Forged ';
attrValueMap['Style de produit'] = 'Connector ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Taille du raccordement 2'] = '1/8 ';
attrValueMap['Type de raccordement 1'] = 'Compression ';
attrValueMap['Taille du raccordement 1'] = '3/16 ';
attrValueMap['Configuration'] = 'Tube to Pipe ';
attrValueMap['Type de raccordement 2'] = 'Male NPTF ';
attrValueMap['Matériau du corps'] = 'Brass, Forged ';
attrValueMap['Style de produit'] = 'Connector ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Taille du raccordement 2'] = '1/4 ';
attrValueMap['Type de raccordement 1'] = 'Compression ';
attrValueMap['Taille du raccordement 1'] = '3/16 ';
attrValueMap['Configuration'] = 'Tube to Pipe ';
attrValueMap['Type de raccordement 2'] = 'Male NPTF ';
attrValueMap['Matériau du corps'] = 'Brass, Forged ';
attrValueMap['Style de produit'] = 'Connector ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Taille du raccordement 1'] = '1/4 ';
attrValueMap['Taille du raccordement 2'] = '1/8 ';
attrValueMap['Type de raccordement 1'] = 'Compression ';
attrValueMap['Configuration'] = 'Tube to Pipe ';
attrValueMap['Type de raccordement 2'] = 'Male NPTF ';
attrValueMap['Matériau du corps'] = 'Brass, Forged ';
attrValueMap['Style de produit'] = 'Connector ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Taille du raccordement 2'] = '1/4 ';
attrValueMap['Taille du raccordement 1'] = '1/4 ';
attrValueMap['Type de raccordement 1'] = 'Compression ';
attrValueMap['Configuration'] = 'Tube to Pipe ';
attrValueMap['Type de raccordement 2'] = 'Male NPTF ';
attrValueMap['Matériau du corps'] = 'Brass, Forged ';
attrValueMap['Style de produit'] = 'Connector ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Taille du raccordement 1'] = '1/4 ';
attrValueMap['Taille du raccordement 2'] = '3/8 ';
attrValueMap['Type de raccordement 1'] = 'Compression ';
attrValueMap['Configuration'] = 'Tube to Pipe ';
attrValueMap['Type de raccordement 2'] = 'Male NPTF ';
attrValueMap['Matériau du corps'] = 'Brass, Forged ';
attrValueMap['Style de produit'] = 'Connector ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Taille du raccordement 1'] = '1/4 ';
attrValueMap['Taille du raccordement 2'] = '1/2 ';
attrValueMap['Type de raccordement 1'] = 'Compression ';
attrValueMap['Configuration'] = 'Tube to Pipe ';
attrValueMap['Type de raccordement 2'] = 'Male NPTF ';
attrValueMap['Matériau du corps'] = 'Brass, Forged ';
attrValueMap['Style de produit'] = 'Connector ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Taille du raccordement 1'] = '5/16 ';
attrValueMap['Taille du raccordement 2'] = '1/8 ';
attrValueMap['Type de raccordement 1'] = 'Compression ';
attrValueMap['Configuration'] = 'Tube to Pipe ';
attrValueMap['Type de raccordement 2'] = 'Male NPTF ';
attrValueMap['Matériau du corps'] = 'Brass, Forged ';
attrValueMap['Style de produit'] = 'Connector ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Taille du raccordement 2'] = '1/4 ';
attrValueMap['Taille du raccordement 1'] = '5/16 ';
attrValueMap['Type de raccordement 1'] = 'Compression ';
attrValueMap['Configuration'] = 'Tube to Pipe ';
attrValueMap['Type de raccordement 2'] = 'Male NPTF ';
attrValueMap['Matériau du corps'] = 'Brass, Forged ';
attrValueMap['Style de produit'] = 'Connector ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Taille du raccordement 2'] = '1/8 ';
attrValueMap['Taille du raccordement 1'] = '3/8 ';
attrValueMap['Type de raccordement 1'] = 'Compression ';
attrValueMap['Configuration'] = 'Tube to Pipe ';
attrValueMap['Type de raccordement 2'] = 'Male NPTF ';
attrValueMap['Matériau du corps'] = 'Brass, Forged ';
attrValueMap['Style de produit'] = 'Connector ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Taille du raccordement 2'] = '1/4 ';
attrValueMap['Taille du raccordement 1'] = '3/8 ';
attrValueMap['Type de raccordement 1'] = 'Compression ';
attrValueMap['Configuration'] = 'Tube to Pipe ';
attrValueMap['Type de raccordement 2'] = 'Male NPTF ';
attrValueMap['Matériau du corps'] = 'Brass, Forged ';
attrValueMap['Style de produit'] = 'Connector ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Taille du raccordement 2'] = '3/8 ';
attrValueMap['Taille du raccordement 1'] = '3/8 ';
attrValueMap['Type de raccordement 1'] = 'Compression ';
attrValueMap['Configuration'] = 'Tube to Pipe ';
attrValueMap['Type de raccordement 2'] = 'Male NPTF ';
attrValueMap['Matériau du corps'] = 'Brass, Forged ';
attrValueMap['Style de produit'] = 'Connector ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Taille du raccordement 1'] = '3/8 ';
attrValueMap['Taille du raccordement 2'] = '1/2 ';
attrValueMap['Type de raccordement 1'] = 'Compression ';
attrValueMap['Configuration'] = 'Tube to Pipe ';
attrValueMap['Type de raccordement 2'] = 'Male NPTF ';
attrValueMap['Matériau du corps'] = 'Brass, Forged ';
attrValueMap['Style de produit'] = 'Connector ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Taille du raccordement 2'] = '1/4 ';
attrValueMap['Taille du raccordement 1'] = '7/16 ';
attrValueMap['Type de raccordement 1'] = 'Compression ';
attrValueMap['Configuration'] = 'Tube to Pipe ';
attrValueMap['Type de raccordement 2'] = 'Male NPTF ';
attrValueMap['Matériau du corps'] = 'Brass, Forged ';
attrValueMap['Style de produit'] = 'Connector ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Taille du raccordement 2'] = '1/4 ';
attrValueMap['Type de raccordement 1'] = 'Compression ';
attrValueMap['Taille du raccordement 1'] = '1/2 ';
attrValueMap['Configuration'] = 'Tube to Pipe ';
attrValueMap['Type de raccordement 2'] = 'Male NPTF ';
attrValueMap['Matériau du corps'] = 'Brass, Forged ';
attrValueMap['Style de produit'] = 'Connector ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Taille du raccordement 2'] = '3/8 ';
attrValueMap['Type de raccordement 1'] = 'Compression ';
attrValueMap['Taille du raccordement 1'] = '1/2 ';
attrValueMap['Configuration'] = 'Tube to Pipe ';
attrValueMap['Type de raccordement 2'] = 'Male NPTF ';
attrValueMap['Matériau du corps'] = 'Brass, Forged ';
attrValueMap['Style de produit'] = 'Connector ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Taille du raccordement 2'] = '1/2 ';
attrValueMap['Type de raccordement 1'] = 'Compression ';
attrValueMap['Taille du raccordement 1'] = '1/2 ';
attrValueMap['Configuration'] = 'Tube to Pipe ';
attrValueMap['Type de raccordement 2'] = 'Male NPTF ';
attrValueMap['Matériau du corps'] = 'Brass, Forged ';
attrValueMap['Style de produit'] = 'Connector ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Taille du raccordement 3'] = '5/8 ';
attrValueMap['Type de raccordement 2'] = 'Compression ';
attrValueMap['Type de raccordement 3'] = 'Compression ';
attrValueMap['Configuration'] = 'Tube to Tube ';
attrValueMap['Taille du raccordement 2'] = '5/8 ';
attrValueMap['Taille du raccordement 1'] = '5/8 ';
attrValueMap['Type de raccordement 1'] = 'Compression ';
attrValueMap['Forme'] = 'Té ';
attrValueMap['Matériau du corps'] = 'Brass, Forged ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Taille du raccordement 3'] = '3/4 ';
attrValueMap['Taille du raccordement 1'] = '3/4 ';
attrValueMap['Type de raccordement 2'] = 'Compression ';
attrValueMap['Type de raccordement 3'] = 'Compression ';
attrValueMap['Taille du raccordement 2'] = '3/4 ';
attrValueMap['Configuration'] = 'Tube to Tube ';
attrValueMap['Type de raccordement 1'] = 'Compression ';
attrValueMap['Forme'] = 'Té ';
attrValueMap['Matériau du corps'] = 'Brass, Forged ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Forme'] = 'Elbow 90° ';
attrValueMap['Taille du raccordement 2'] = '1/8 ';
attrValueMap['Taille du raccordement 1'] = '3/8 ';
attrValueMap['Type de raccordement 1'] = 'Compression ';
attrValueMap['Configuration'] = 'Tube to Pipe ';
attrValueMap['Type de raccordement 2'] = 'Male NPTF ';
attrValueMap['Matériau du corps'] = 'Brass, Forged ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Taille du raccordement 2'] = '1/4 ';
attrValueMap['Forme'] = 'Elbow 90° ';
attrValueMap['Taille du raccordement 1'] = '3/8 ';
attrValueMap['Type de raccordement 1'] = 'Compression ';
attrValueMap['Configuration'] = 'Tube to Pipe ';
attrValueMap['Type de raccordement 2'] = 'Male NPTF ';
attrValueMap['Matériau du corps'] = 'Brass, Forged ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Forme'] = 'Elbow 90° ';
attrValueMap['Taille du raccordement 2'] = '3/8 ';
attrValueMap['Taille du raccordement 1'] = '3/8 ';
attrValueMap['Type de raccordement 1'] = 'Compression ';
attrValueMap['Configuration'] = 'Tube to Pipe ';
attrValueMap['Type de raccordement 2'] = 'Male NPTF ';
attrValueMap['Matériau du corps'] = 'Brass, Forged ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Forme'] = 'Elbow 90° ';
attrValueMap['Taille du raccordement 1'] = '3/8 ';
attrValueMap['Taille du raccordement 2'] = '1/2 ';
attrValueMap['Type de raccordement 1'] = 'Compression ';
attrValueMap['Configuration'] = 'Tube to Pipe ';
attrValueMap['Type de raccordement 2'] = 'Male NPTF ';
attrValueMap['Matériau du corps'] = 'Brass, Forged ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Taille du raccordement 2'] = '1/4 ';
attrValueMap['Forme'] = 'Elbow 90° ';
attrValueMap['Type de raccordement 1'] = 'Compression ';
attrValueMap['Taille du raccordement 1'] = '1/2 ';
attrValueMap['Configuration'] = 'Tube to Pipe ';
attrValueMap['Type de raccordement 2'] = 'Male NPTF ';
attrValueMap['Matériau du corps'] = 'Brass, Forged ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Forme'] = 'Elbow 90° ';
attrValueMap['Taille du raccordement 2'] = '3/8 ';
attrValueMap['Type de raccordement 1'] = 'Compression ';
attrValueMap['Taille du raccordement 1'] = '1/2 ';
attrValueMap['Configuration'] = 'Tube to Pipe ';
attrValueMap['Type de raccordement 2'] = 'Male NPTF ';
attrValueMap['Matériau du corps'] = 'Brass, Forged ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Forme'] = 'Elbow 90° ';
attrValueMap['Taille du raccordement 2'] = '1/2 ';
attrValueMap['Type de raccordement 1'] = 'Compression ';
attrValueMap['Taille du raccordement 1'] = '1/2 ';
attrValueMap['Configuration'] = 'Tube to Pipe ';
attrValueMap['Type de raccordement 2'] = 'Male NPTF ';
attrValueMap['Matériau du corps'] = 'Brass, Forged ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Taille du raccordement 1'] = '3/4 ';
attrValueMap['Forme'] = 'Elbow 90° ';
attrValueMap['Taille du raccordement 2'] = '3/4 ';
attrValueMap['Type de raccordement 1'] = 'Compression ';
attrValueMap['Type de raccordement 2'] = 'Female NPTF ';
attrValueMap['Configuration'] = 'Tube to Pipe ';
attrValueMap['Matériau du corps'] = 'Brass, Forged ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Forme'] = 'Elbow 90° ';
attrValueMap['Taille du raccordement 1'] = '1/8 ';
attrValueMap['Taille du raccordement 2'] = '1/8 ';
attrValueMap['Type de raccordement 1'] = 'Compression ';
attrValueMap['Type de raccordement 2'] = 'Female NPTF ';
attrValueMap['Configuration'] = 'Tube to Pipe ';
attrValueMap['Matériau du corps'] = 'Brass, Forged ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Forme'] = 'Elbow 90° ';
attrValueMap['Taille du raccordement 2'] = '1/8 ';
attrValueMap['Type de raccordement 1'] = 'Compression ';
attrValueMap['Type de raccordement 2'] = 'Female NPTF ';
attrValueMap['Taille du raccordement 1'] = '3/16 ';
attrValueMap['Configuration'] = 'Tube to Pipe ';
attrValueMap['Matériau du corps'] = 'Brass, Forged ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Taille du raccordement 2'] = '1/4 ';
attrValueMap['Forme'] = 'Elbow 90° ';
attrValueMap['Taille du raccordement 1'] = '1/4 ';
attrValueMap['Type de raccordement 2'] = 'Compression ';
attrValueMap['Configuration'] = 'Tube to Tube ';
attrValueMap['Type de raccordement 1'] = 'Compression ';
attrValueMap['Matériau du corps'] = 'Brass, Extruded ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Forme'] = 'Elbow 90° ';
attrValueMap['Taille du raccordement 1'] = '1/8 ';
attrValueMap['Taille du raccordement 2'] = '1/8 ';
attrValueMap['Type de raccordement 1'] = 'Compression ';
attrValueMap['Configuration'] = 'Tube to Pipe ';
attrValueMap['Type de raccordement 2'] = 'Male NPTF ';
attrValueMap['Matériau du corps'] = 'Brass, Extruded ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Forme'] = 'Elbow 90° ';
attrValueMap['Taille du raccordement 2'] = '1/8 ';
attrValueMap['Type de raccordement 1'] = 'Compression ';
attrValueMap['Taille du raccordement 1'] = '3/16 ';
attrValueMap['Configuration'] = 'Tube to Pipe ';
attrValueMap['Type de raccordement 2'] = 'Male NPTF ';
attrValueMap['Matériau du corps'] = 'Brass, Extruded ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Forme'] = 'Elbow 90° ';
attrValueMap['Taille du raccordement 1'] = '1/4 ';
attrValueMap['Taille du raccordement 2'] = '1/8 ';
attrValueMap['Type de raccordement 1'] = 'Compression ';
attrValueMap['Configuration'] = 'Tube to Pipe ';
attrValueMap['Type de raccordement 2'] = 'Male NPTF ';
attrValueMap['Matériau du corps'] = 'Brass, Extruded ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Taille du raccordement 2'] = '1/4 ';
attrValueMap['Forme'] = 'Elbow 90° ';
attrValueMap['Taille du raccordement 1'] = '1/4 ';
attrValueMap['Type de raccordement 1'] = 'Compression ';
attrValueMap['Configuration'] = 'Tube to Pipe ';
attrValueMap['Type de raccordement 2'] = 'Male NPTF ';
attrValueMap['Matériau du corps'] = 'Brass, Extruded ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Taille du raccordement 1'] = '5/16 ';
attrValueMap['Forme'] = 'Elbow 90° ';
attrValueMap['Taille du raccordement 2'] = '1/8 ';
attrValueMap['Type de raccordement 1'] = 'Compression ';
attrValueMap['Configuration'] = 'Tube to Pipe ';
attrValueMap['Type de raccordement 2'] = 'Male NPTF ';
attrValueMap['Matériau du corps'] = 'Brass, Extruded ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Taille du raccordement 2'] = '1/4 ';
attrValueMap['Taille du raccordement 1'] = '5/16 ';
attrValueMap['Forme'] = 'Elbow 90° ';
attrValueMap['Type de raccordement 1'] = 'Compression ';
attrValueMap['Configuration'] = 'Tube to Pipe ';
attrValueMap['Type de raccordement 2'] = 'Male NPTF ';
attrValueMap['Matériau du corps'] = 'Brass, Extruded ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Forme'] = 'Elbow 90° ';
attrValueMap['Taille du raccordement 2'] = '1/8 ';
attrValueMap['Taille du raccordement 1'] = '3/8 ';
attrValueMap['Type de raccordement 1'] = 'Compression ';
attrValueMap['Configuration'] = 'Tube to Pipe ';
attrValueMap['Type de raccordement 2'] = 'Male NPTF ';
attrValueMap['Matériau du corps'] = 'Brass, Extruded ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Taille du raccordement 2'] = '1/4 ';
attrValueMap['Forme'] = 'Elbow 90° ';
attrValueMap['Taille du raccordement 1'] = '3/8 ';
attrValueMap['Type de raccordement 1'] = 'Compression ';
attrValueMap['Configuration'] = 'Tube to Pipe ';
attrValueMap['Type de raccordement 2'] = 'Male NPTF ';
attrValueMap['Matériau du corps'] = 'Brass, Extruded ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Forme'] = 'Elbow 90° ';
attrValueMap['Taille du raccordement 2'] = '3/8 ';
attrValueMap['Taille du raccordement 1'] = '3/8 ';
attrValueMap['Type de raccordement 1'] = 'Compression ';
attrValueMap['Configuration'] = 'Tube to Pipe ';
attrValueMap['Type de raccordement 2'] = 'Male NPTF ';
attrValueMap['Matériau du corps'] = 'Brass, Extruded ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Taille du raccordement 1'] = '3/8 ';
attrValueMap['Type de raccordement 1'] = 'Compression ';
attrValueMap['Matériau du corps'] = 'Brass, Forged ';
attrValueMap['Style de produit'] = 'Long Nut ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Type de raccordement 1'] = 'Compression ';
attrValueMap['Taille du raccordement 1'] = '1/2 ';
attrValueMap['Matériau du corps'] = 'Brass, Forged ';
attrValueMap['Style de produit'] = 'Long Nut ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Type de raccordement 2'] = 'Compression ';
attrValueMap['Configuration'] = 'Tube to Tube ';
attrValueMap['Taille du raccordement 2'] = '5/8 ';
attrValueMap['Taille du raccordement 1'] = '5/8 ';
attrValueMap['Type de raccordement 1'] = 'Compression ';
attrValueMap['Matériau du corps'] = 'Brass, Forged ';
attrValueMap['Forme'] = 'Union ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Type de raccordement 2'] = 'Compression ';
attrValueMap['Taille du raccordement 2'] = '3/8 ';
attrValueMap['Configuration'] = 'Tube to Tube ';
attrValueMap['Taille du raccordement 1'] = '5/8 ';
attrValueMap['Type de raccordement 1'] = 'Compression ';
attrValueMap['Matériau du corps'] = 'Brass, Forged ';
attrValueMap['Forme'] = 'Union Reducer ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Taille du raccordement 1'] = '3/4 ';
attrValueMap['Type de raccordement 2'] = 'Compression ';
attrValueMap['Taille du raccordement 2'] = '3/4 ';
attrValueMap['Configuration'] = 'Tube to Tube ';
attrValueMap['Type de raccordement 1'] = 'Compression ';
attrValueMap['Matériau du corps'] = 'Brass, Forged ';
attrValueMap['Forme'] = 'Union ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Taille du raccordement 1'] = '7/8 ';
attrValueMap['Taille du raccordement 2'] = '7/8 ';
attrValueMap['Type de raccordement 2'] = 'Compression ';
attrValueMap['Configuration'] = 'Tube to Tube ';
attrValueMap['Type de raccordement 1'] = 'Compression ';
attrValueMap['Matériau du corps'] = 'Brass, Forged ';
attrValueMap['Forme'] = 'Union ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Taille du raccordement 1'] = '1/8 ';
attrValueMap['Type de raccordement 2'] = 'Compression ';
attrValueMap['Taille du raccordement 2'] = '1/8 ';
attrValueMap['Configuration'] = 'Tube to Tube ';
attrValueMap['Type de raccordement 1'] = 'Compression ';
attrValueMap['Matériau du corps'] = 'Brass, Forged ';
attrValueMap['Forme'] = 'Union ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Taille du raccordement 2'] = '3/16 ';
attrValueMap['Type de raccordement 2'] = 'Compression ';
attrValueMap['Configuration'] = 'Tube to Tube ';
attrValueMap['Type de raccordement 1'] = 'Compression ';
attrValueMap['Taille du raccordement 1'] = '3/16 ';
attrValueMap['Matériau du corps'] = 'Brass, Forged ';
attrValueMap['Forme'] = 'Union ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Taille du raccordement 2'] = '1/4 ';
attrValueMap['Taille du raccordement 1'] = '1/4 ';
attrValueMap['Type de raccordement 2'] = 'Compression ';
attrValueMap['Configuration'] = 'Tube to Tube ';
attrValueMap['Type de raccordement 1'] = 'Compression ';
attrValueMap['Matériau du corps'] = 'Brass, Forged ';
attrValueMap['Forme'] = 'Union ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Taille du raccordement 1'] = '1/4 ';
attrValueMap['Type de raccordement 2'] = 'Compression ';
attrValueMap['Taille du raccordement 2'] = '3/8 ';
attrValueMap['Configuration'] = 'Tube to Tube ';
attrValueMap['Type de raccordement 1'] = 'Compression ';
attrValueMap['Matériau du corps'] = 'Brass, Forged ';
attrValueMap['Forme'] = 'Union Reducer ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Taille du raccordement 1'] = '5/16 ';
attrValueMap['Type de raccordement 2'] = 'Compression ';
attrValueMap['Taille du raccordement 2'] = '5/16 ';
attrValueMap['Configuration'] = 'Tube to Tube ';
attrValueMap['Type de raccordement 1'] = 'Compression ';
attrValueMap['Matériau du corps'] = 'Brass, Forged ';
attrValueMap['Forme'] = 'Union ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Taille du raccordement 1'] = '1/8 ';
attrValueMap['Type de raccordement 2'] = 'Compression ';
attrValueMap['Type de raccordement 3'] = 'Compression ';
attrValueMap['Taille du raccordement 2'] = '1/8 ';
attrValueMap['Configuration'] = 'Tube to Tube ';
attrValueMap['Type de raccordement 1'] = 'Compression ';
attrValueMap['Taille du raccordement 3'] = '1/8 ';
attrValueMap['Forme'] = 'Té ';
attrValueMap['Matériau du corps'] = 'Brass, Forged ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Taille du raccordement 2'] = '1/4 ';
attrValueMap['Taille du raccordement 1'] = '1/4 ';
attrValueMap['Type de raccordement 2'] = 'Compression ';
attrValueMap['Type de raccordement 3'] = 'Compression ';
attrValueMap['Configuration'] = 'Tube to Tube ';
attrValueMap['Type de raccordement 1'] = 'Compression ';
attrValueMap['Taille du raccordement 3'] = '1/4 ';
attrValueMap['Forme'] = 'Té ';
attrValueMap['Matériau du corps'] = 'Brass, Forged ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Taille du raccordement 1'] = '5/16 ';
attrValueMap['Type de raccordement 2'] = 'Compression ';
attrValueMap['Type de raccordement 3'] = 'Compression ';
attrValueMap['Taille du raccordement 2'] = '5/16 ';
attrValueMap['Configuration'] = 'Tube to Tube ';
attrValueMap['Type de raccordement 1'] = 'Compression ';
attrValueMap['Taille du raccordement 3'] = '5/16 ';
attrValueMap['Forme'] = 'Té ';
attrValueMap['Matériau du corps'] = 'Brass, Forged ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Taille du raccordement 3'] = '3/8 ';
attrValueMap['Type de raccordement 2'] = 'Compression ';
attrValueMap['Taille du raccordement 2'] = '3/8 ';
attrValueMap['Type de raccordement 3'] = 'Compression ';
attrValueMap['Taille du raccordement 1'] = '3/8 ';
attrValueMap['Configuration'] = 'Tube to Tube ';
attrValueMap['Type de raccordement 1'] = 'Compression ';
attrValueMap['Forme'] = 'Té ';
attrValueMap['Matériau du corps'] = 'Brass, Forged ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Taille du raccordement 2'] = '1/4 ';
attrValueMap['Type de raccordement 2'] = 'Compression ';
attrValueMap['Type de raccordement 3'] = 'Compression ';
attrValueMap['Taille du raccordement 1'] = '3/8 ';
attrValueMap['Configuration'] = 'Tube to Tube ';
attrValueMap['Type de raccordement 1'] = 'Compression ';
attrValueMap['Taille du raccordement 3'] = '1/4 ';
attrValueMap['Forme'] = 'Té ';
attrValueMap['Matériau du corps'] = 'Brass, Forged ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Type de raccordement 2'] = 'Compression ';
attrValueMap['Taille du raccordement 2'] = '3/8 ';
attrValueMap['Type de raccordement 3'] = 'Compression ';
attrValueMap['Taille du raccordement 1'] = '3/8 ';
attrValueMap['Configuration'] = 'Tube to Tube ';
attrValueMap['Type de raccordement 1'] = 'Compression ';
attrValueMap['Taille du raccordement 3'] = '1/4 ';
attrValueMap['Forme'] = 'Té ';
attrValueMap['Matériau du corps'] = 'Brass, Forged ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Taille du raccordement 3'] = '1/2 ';
attrValueMap['Type de raccordement 2'] = 'Compression ';
attrValueMap['Type de raccordement 3'] = 'Compression ';
attrValueMap['Configuration'] = 'Tube to Tube ';
attrValueMap['Taille du raccordement 2'] = '1/2 ';
attrValueMap['Type de raccordement 1'] = 'Compression ';
attrValueMap['Taille du raccordement 1'] = '1/2 ';
attrValueMap['Forme'] = 'Té ';
attrValueMap['Matériau du corps'] = 'Brass, Forged ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Taille du raccordement 3'] = '3/8 ';
attrValueMap['Type de raccordement 2'] = 'Compression ';
attrValueMap['Type de raccordement 3'] = 'Compression ';
attrValueMap['Configuration'] = 'Tube to Tube ';
attrValueMap['Taille du raccordement 2'] = '1/2 ';
attrValueMap['Type de raccordement 1'] = 'Compression ';
attrValueMap['Taille du raccordement 1'] = '1/2 ';
attrValueMap['Forme'] = 'Té ';
attrValueMap['Matériau du corps'] = 'Brass, Forged ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Forme'] = 'Elbow 90° ';
attrValueMap['Type de raccordement 2'] = 'Compression ';
attrValueMap['Configuration'] = 'Tube to Tube ';
attrValueMap['Taille du raccordement 2'] = '5/8 ';
attrValueMap['Taille du raccordement 1'] = '5/8 ';
attrValueMap['Type de raccordement 1'] = 'Compression ';
attrValueMap['Matériau du corps'] = 'Brass, Forged ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Taille du raccordement 1'] = '3/4 ';
attrValueMap['Forme'] = 'Elbow 90° ';
attrValueMap['Type de raccordement 2'] = 'Compression ';
attrValueMap['Taille du raccordement 2'] = '3/4 ';
attrValueMap['Configuration'] = 'Tube to Tube ';
attrValueMap['Type de raccordement 1'] = 'Compression ';
attrValueMap['Matériau du corps'] = 'Brass, Forged ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Forme'] = 'Elbow 90° ';
attrValueMap['Taille du raccordement 1'] = '1/4 ';
attrValueMap['Taille du raccordement 2'] = '1/8 ';
attrValueMap['Type de raccordement 1'] = 'Compression ';
attrValueMap['Type de raccordement 2'] = 'Female NPTF ';
attrValueMap['Configuration'] = 'Tube to Pipe ';
attrValueMap['Matériau du corps'] = 'Brass, Forged ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Taille du raccordement 2'] = '1/4 ';
attrValueMap['Forme'] = 'Elbow 90° ';
attrValueMap['Taille du raccordement 1'] = '1/4 ';
attrValueMap['Type de raccordement 1'] = 'Compression ';
attrValueMap['Type de raccordement 2'] = 'Female NPTF ';
attrValueMap['Configuration'] = 'Tube to Pipe ';
attrValueMap['Matériau du corps'] = 'Brass, Forged ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Taille du raccordement 2'] = '1/4 ';
attrValueMap['Forme'] = 'Elbow 90° ';
attrValueMap['Taille du raccordement 1'] = '3/8 ';
attrValueMap['Type de raccordement 1'] = 'Compression ';
attrValueMap['Type de raccordement 2'] = 'Female NPTF ';
attrValueMap['Configuration'] = 'Tube to Pipe ';
attrValueMap['Matériau du corps'] = 'Brass, Forged ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Forme'] = 'Elbow 90° ';
attrValueMap['Taille du raccordement 2'] = '3/8 ';
attrValueMap['Taille du raccordement 1'] = '3/8 ';
attrValueMap['Type de raccordement 1'] = 'Compression ';
attrValueMap['Type de raccordement 2'] = 'Female NPTF ';
attrValueMap['Configuration'] = 'Tube to Pipe ';
attrValueMap['Matériau du corps'] = 'Brass, Forged ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Taille du raccordement 2'] = '1/4 ';
attrValueMap['Taille du raccordement 1'] = '7/16 ';
attrValueMap['Forme'] = 'Elbow 90° ';
attrValueMap['Type de raccordement 1'] = 'Compression ';
attrValueMap['Type de raccordement 2'] = 'Female NPTF ';
attrValueMap['Configuration'] = 'Tube to Pipe ';
attrValueMap['Matériau du corps'] = 'Brass, Forged ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Forme'] = 'Elbow 90° ';
attrValueMap['Taille du raccordement 2'] = '3/8 ';
attrValueMap['Type de raccordement 1'] = 'Compression ';
attrValueMap['Type de raccordement 2'] = 'Female NPTF ';
attrValueMap['Taille du raccordement 1'] = '1/2 ';
attrValueMap['Configuration'] = 'Tube to Pipe ';
attrValueMap['Matériau du corps'] = 'Brass, Forged ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Forme'] = 'Elbow 90° ';
attrValueMap['Taille du raccordement 2'] = '1/2 ';
attrValueMap['Type de raccordement 1'] = 'Compression ';
attrValueMap['Type de raccordement 2'] = 'Female NPTF ';
attrValueMap['Taille du raccordement 1'] = '1/2 ';
attrValueMap['Configuration'] = 'Tube to Pipe ';
attrValueMap['Matériau du corps'] = 'Brass, Forged ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Taille du raccordement 1'] = '1/8 ';
attrValueMap['Type de raccordement 3'] = 'Compression ';
attrValueMap['Taille du raccordement 2'] = '1/8 ';
attrValueMap['Type de raccordement 1'] = 'Compression ';
attrValueMap['Taille du raccordement 3'] = '1/8 ';
attrValueMap['Configuration'] = 'Tube to Pipe ';
attrValueMap['Type de raccordement 2'] = 'Male NPTF ';
attrValueMap['Matériau du corps'] = 'Brass, Forged ';
attrValueMap['Forme'] = 'Run Tee ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Type de raccordement 3'] = 'Compression ';
attrValueMap['Taille du raccordement 2'] = '1/8 ';
attrValueMap['Type de raccordement 1'] = 'Compression ';
attrValueMap['Taille du raccordement 1'] = '3/16 ';
attrValueMap['Taille du raccordement 3'] = '3/16 ';
attrValueMap['Configuration'] = 'Tube to Pipe ';
attrValueMap['Type de raccordement 2'] = 'Male NPTF ';
attrValueMap['Matériau du corps'] = 'Brass, Forged ';
attrValueMap['Forme'] = 'Run Tee ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Taille du raccordement 1'] = '1/4 ';
attrValueMap['Type de raccordement 3'] = 'Compression ';
attrValueMap['Taille du raccordement 2'] = '1/8 ';
attrValueMap['Type de raccordement 1'] = 'Compression ';
attrValueMap['Configuration'] = 'Tube to Pipe ';
attrValueMap['Type de raccordement 2'] = 'Male NPTF ';
attrValueMap['Taille du raccordement 3'] = '1/4 ';
attrValueMap['Matériau du corps'] = 'Brass, Forged ';
attrValueMap['Forme'] = 'Run Tee ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Taille du raccordement 1'] = '7/16 ';
attrValueMap['Forme'] = 'Elbow 90° ';
attrValueMap['Taille du raccordement 2'] = '3/8 ';
attrValueMap['Type de raccordement 1'] = 'Compression ';
attrValueMap['Configuration'] = 'Tube to Pipe ';
attrValueMap['Type de raccordement 2'] = 'Male NPTF ';
attrValueMap['Matériau du corps'] = 'Brass, Extruded ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Forme'] = 'Elbow 90° ';
attrValueMap['Taille du raccordement 1'] = '1/4 ';
attrValueMap['Taille du raccordement 2'] = '1/8 ';
attrValueMap['Type de raccordement 1'] = 'Compression ';
attrValueMap['Type de raccordement 2'] = 'Female NPTF ';
attrValueMap['Configuration'] = 'Tube to Pipe ';
attrValueMap['Matériau du corps'] = 'Brass, Extruded ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Taille du raccordement 1'] = '5/8 ';
attrValueMap['Type de raccordement 1'] = 'Compression ';
attrValueMap['Matériau du corps'] = 'Brass, Forged ';
attrValueMap['Style de produit'] = 'Sleeve ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Taille du raccordement 1'] = '3/4 ';
attrValueMap['Type de raccordement 1'] = 'Compression ';
attrValueMap['Matériau du corps'] = 'Brass, Forged ';
attrValueMap['Style de produit'] = 'Sleeve ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Taille du raccordement 1'] = '7/8 ';
attrValueMap['Type de raccordement 1'] = 'Compression ';
attrValueMap['Matériau du corps'] = 'Brass, Forged ';
attrValueMap['Style de produit'] = 'Sleeve ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Taille du raccordement 1'] = '1/8 ';
attrValueMap['Type de raccordement 1'] = 'Compression ';
attrValueMap['Matériau du corps'] = 'Brass, Forged ';
attrValueMap['Style de produit'] = 'Sleeve ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Type de raccordement 1'] = 'Compression ';
attrValueMap['Taille du raccordement 1'] = '3/16 ';
attrValueMap['Matériau du corps'] = 'Brass, Forged ';
attrValueMap['Style de produit'] = 'Sleeve ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Taille du raccordement 1'] = '1/4 ';
attrValueMap['Type de raccordement 1'] = 'Compression ';
attrValueMap['Matériau du corps'] = 'Brass, Forged ';
attrValueMap['Style de produit'] = 'Sleeve ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Taille du raccordement 1'] = '5/16 ';
attrValueMap['Type de raccordement 1'] = 'Compression ';
attrValueMap['Matériau du corps'] = 'Brass, Forged ';
attrValueMap['Style de produit'] = 'Sleeve ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Taille du raccordement 1'] = '3/8 ';
attrValueMap['Type de raccordement 1'] = 'Compression ';
attrValueMap['Matériau du corps'] = 'Brass, Forged ';
attrValueMap['Style de produit'] = 'Sleeve ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Type de raccordement 2'] = 'Compression ';
attrValueMap['Taille du raccordement 2'] = '3/8 ';
attrValueMap['Taille du raccordement 1'] = '3/8 ';
attrValueMap['Configuration'] = 'Tube to Tube ';
attrValueMap['Type de raccordement 1'] = 'Compression ';
attrValueMap['Matériau du corps'] = 'Brass, Forged ';
attrValueMap['Forme'] = 'Union ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Taille du raccordement 2'] = '1/4 ';
attrValueMap['Type de raccordement 2'] = 'Compression ';
attrValueMap['Taille du raccordement 1'] = '3/8 ';
attrValueMap['Configuration'] = 'Tube to Tube ';
attrValueMap['Type de raccordement 1'] = 'Compression ';
attrValueMap['Matériau du corps'] = 'Brass, Forged ';
attrValueMap['Forme'] = 'Union Reducer ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Taille du raccordement 1'] = '7/16 ';
attrValueMap['Taille du raccordement 2'] = '7/16 ';
attrValueMap['Type de raccordement 2'] = 'Compression ';
attrValueMap['Configuration'] = 'Tube to Tube ';
attrValueMap['Type de raccordement 1'] = 'Compression ';
attrValueMap['Matériau du corps'] = 'Brass, Forged ';
attrValueMap['Forme'] = 'Union ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Type de raccordement 2'] = 'Compression ';
attrValueMap['Configuration'] = 'Tube to Tube ';
attrValueMap['Taille du raccordement 2'] = '1/2 ';
attrValueMap['Type de raccordement 1'] = 'Compression ';
attrValueMap['Taille du raccordement 1'] = '1/2 ';
attrValueMap['Matériau du corps'] = 'Brass, Forged ';
attrValueMap['Forme'] = 'Union ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Type de raccordement 2'] = 'Compression ';
attrValueMap['Taille du raccordement 2'] = '3/8 ';
attrValueMap['Configuration'] = 'Tube to Tube ';
attrValueMap['Type de raccordement 1'] = 'Compression ';
attrValueMap['Taille du raccordement 1'] = '1/2 ';
attrValueMap['Matériau du corps'] = 'Brass, Forged ';
attrValueMap['Forme'] = 'Union Reducer ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Taille du raccordement 2'] = '1/4 ';
attrValueMap['Taille du raccordement 1'] = '1/4 ';
attrValueMap['Type de raccordement 2'] = 'Compression ';
attrValueMap['Configuration'] = 'Tube to Tube ';
attrValueMap['Type de raccordement 1'] = 'Compression ';
attrValueMap['Matériau du corps'] = 'Brass, Forged ';
attrValueMap['Style de produit'] = 'Bulkhead ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Type de raccordement 2'] = 'Compression ';
attrValueMap['Taille du raccordement 2'] = '3/8 ';
attrValueMap['Taille du raccordement 1'] = '3/8 ';
attrValueMap['Configuration'] = 'Tube to Tube ';
attrValueMap['Type de raccordement 1'] = 'Compression ';
attrValueMap['Matériau du corps'] = 'Brass, Forged ';
attrValueMap['Style de produit'] = 'Bulkhead ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Taille du raccordement 1'] = '1/4 ';
attrValueMap['Type de raccordement 1'] = 'Compression ';
attrValueMap['Matériau du corps'] = 'Brass, Forged ';
attrValueMap['Style de produit'] = 'Plug ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Taille du raccordement 2'] = '1/2 ';
attrValueMap['Taille du raccordement 1'] = '5/8 ';
attrValueMap['Type de raccordement 1'] = 'Compression ';
attrValueMap['Type de raccordement 2'] = 'Female Pipe ';
attrValueMap['Configuration'] = 'Tube to Pipe ';
attrValueMap['Matériau du corps'] = 'Brass, Forged ';
attrValueMap['Style de produit'] = 'Connector ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Taille du raccordement 1'] = '1/8 ';
attrValueMap['Taille du raccordement 2'] = '1/8 ';
attrValueMap['Type de raccordement 1'] = 'Compression ';
attrValueMap['Type de raccordement 2'] = 'Female NPTF ';
attrValueMap['Configuration'] = 'Tube to Pipe ';
attrValueMap['Matériau du corps'] = 'Brass, Forged ';
attrValueMap['Style de produit'] = 'Connector ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Forme'] = 'Elbow 90° ';
attrValueMap['Taille du raccordement 1'] = '1/8 ';
attrValueMap['Type de raccordement 2'] = 'Compression ';
attrValueMap['Taille du raccordement 2'] = '1/8 ';
attrValueMap['Configuration'] = 'Tube to Tube ';
attrValueMap['Type de raccordement 1'] = 'Compression ';
attrValueMap['Matériau du corps'] = 'Brass, Forged ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Forme'] = 'Elbow 90° ';
attrValueMap['Taille du raccordement 2'] = '3/16 ';
attrValueMap['Type de raccordement 2'] = 'Compression ';
attrValueMap['Configuration'] = 'Tube to Tube ';
attrValueMap['Type de raccordement 1'] = 'Compression ';
attrValueMap['Taille du raccordement 1'] = '3/16 ';
attrValueMap['Matériau du corps'] = 'Brass, Forged ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Taille du raccordement 2'] = '1/4 ';
attrValueMap['Forme'] = 'Elbow 90° ';
attrValueMap['Taille du raccordement 1'] = '1/4 ';
attrValueMap['Type de raccordement 2'] = 'Compression ';
attrValueMap['Configuration'] = 'Tube to Tube ';
attrValueMap['Type de raccordement 1'] = 'Compression ';
attrValueMap['Matériau du corps'] = 'Brass, Forged ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Taille du raccordement 1'] = '5/16 ';
attrValueMap['Forme'] = 'Elbow 90° ';
attrValueMap['Type de raccordement 2'] = 'Compression ';
attrValueMap['Taille du raccordement 2'] = '5/16 ';
attrValueMap['Configuration'] = 'Tube to Tube ';
attrValueMap['Type de raccordement 1'] = 'Compression ';
attrValueMap['Matériau du corps'] = 'Brass, Forged ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Forme'] = 'Elbow 90° ';
attrValueMap['Type de raccordement 2'] = 'Compression ';
attrValueMap['Taille du raccordement 2'] = '3/8 ';
attrValueMap['Taille du raccordement 1'] = '3/8 ';
attrValueMap['Configuration'] = 'Tube to Tube ';
attrValueMap['Type de raccordement 1'] = 'Compression ';
attrValueMap['Matériau du corps'] = 'Brass, Forged ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Taille du raccordement 1'] = '7/16 ';
attrValueMap['Forme'] = 'Elbow 90° ';
attrValueMap['Taille du raccordement 2'] = '7/16 ';
attrValueMap['Type de raccordement 2'] = 'Compression ';
attrValueMap['Configuration'] = 'Tube to Tube ';
attrValueMap['Type de raccordement 1'] = 'Compression ';
attrValueMap['Matériau du corps'] = 'Brass, Forged ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Forme'] = 'Elbow 90° ';
attrValueMap['Type de raccordement 2'] = 'Compression ';
attrValueMap['Configuration'] = 'Tube to Tube ';
attrValueMap['Taille du raccordement 2'] = '1/2 ';
attrValueMap['Type de raccordement 1'] = 'Compression ';
attrValueMap['Taille du raccordement 1'] = '1/2 ';
attrValueMap['Matériau du corps'] = 'Brass, Forged ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Taille du raccordement 1'] = '1/4 ';
attrValueMap['Type de raccordement 2'] = 'Compression ';
attrValueMap['Type de raccordement 3'] = 'Compression ';
attrValueMap['Taille du raccordement 2'] = '1/8 ';
attrValueMap['Type de raccordement 1'] = 'Compression ';
attrValueMap['Taille du raccordement 3'] = '1/8 ';
attrValueMap['Configuration'] = 'Tube to Pipe ';
attrValueMap['Matériau du corps'] = 'Brass, Forged ';
attrValueMap['Forme'] = 'Tee - Gage ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Forme'] = 'Elbow 90° ';
attrValueMap['Taille du raccordement 2'] = '1/2 ';
attrValueMap['Taille du raccordement 1'] = '5/8 ';
attrValueMap['Type de raccordement 1'] = 'Compression ';
attrValueMap['Configuration'] = 'Tube to Pipe ';
attrValueMap['Type de raccordement 2'] = 'Male NPTF ';
attrValueMap['Matériau du corps'] = 'Brass, Forged ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Taille du raccordement 1'] = '3/4 ';
attrValueMap['Forme'] = 'Elbow 90° ';
attrValueMap['Taille du raccordement 2'] = '3/4 ';
attrValueMap['Type de raccordement 1'] = 'Compression ';
attrValueMap['Configuration'] = 'Tube to Pipe ';
attrValueMap['Type de raccordement 2'] = 'Male NPTF ';
attrValueMap['Matériau du corps'] = 'Brass, Forged ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Taille du raccordement 2'] = '1/4 ';
attrValueMap['Taille du raccordement 1'] = '1/4 ';
attrValueMap['Type de raccordement 3'] = 'Compression ';
attrValueMap['Type de raccordement 1'] = 'Compression ';
attrValueMap['Configuration'] = 'Tube to Pipe ';
attrValueMap['Type de raccordement 2'] = 'Male NPTF ';
attrValueMap['Taille du raccordement 3'] = '1/4 ';
attrValueMap['Matériau du corps'] = 'Brass, Forged ';
attrValueMap['Forme'] = 'Run Tee ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Taille du raccordement 2'] = '1/4 ';
attrValueMap['Taille du raccordement 3'] = '3/8 ';
attrValueMap['Type de raccordement 3'] = 'Compression ';
attrValueMap['Taille du raccordement 1'] = '3/8 ';
attrValueMap['Type de raccordement 1'] = 'Compression ';
attrValueMap['Configuration'] = 'Tube to Pipe ';
attrValueMap['Type de raccordement 2'] = 'Male NPTF ';
attrValueMap['Matériau du corps'] = 'Brass, Forged ';
attrValueMap['Forme'] = 'Run Tee ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Taille du raccordement 1'] = '1/8 ';
attrValueMap['Type de raccordement 2'] = 'Compression ';
attrValueMap['Taille du raccordement 2'] = '1/8 ';
attrValueMap['Type de raccordement 1'] = 'Compression ';
attrValueMap['Taille du raccordement 3'] = '1/8 ';
attrValueMap['Type de raccordement 3'] = 'Male NPTF ';
attrValueMap['Configuration'] = 'Tube to Pipe ';
attrValueMap['Matériau du corps'] = 'Brass, Forged ';
attrValueMap['Forme'] = 'Branch Tee ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Taille du raccordement 2'] = '3/16 ';
attrValueMap['Type de raccordement 2'] = 'Compression ';
attrValueMap['Type de raccordement 1'] = 'Compression ';
attrValueMap['Taille du raccordement 3'] = '1/8 ';
attrValueMap['Taille du raccordement 1'] = '3/16 ';
attrValueMap['Type de raccordement 3'] = 'Male NPTF ';
attrValueMap['Configuration'] = 'Tube to Pipe ';
attrValueMap['Matériau du corps'] = 'Brass, Forged ';
attrValueMap['Forme'] = 'Branch Tee ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Taille du raccordement 2'] = '1/4 ';
attrValueMap['Taille du raccordement 1'] = '1/4 ';
attrValueMap['Type de raccordement 2'] = 'Compression ';
attrValueMap['Type de raccordement 1'] = 'Compression ';
attrValueMap['Taille du raccordement 3'] = '1/8 ';
attrValueMap['Type de raccordement 3'] = 'Male NPTF ';
attrValueMap['Configuration'] = 'Tube to Pipe ';
attrValueMap['Matériau du corps'] = 'Brass, Forged ';
attrValueMap['Forme'] = 'Branch Tee ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Taille du raccordement 2'] = '1/4 ';
attrValueMap['Taille du raccordement 1'] = '1/4 ';
attrValueMap['Type de raccordement 2'] = 'Compression ';
attrValueMap['Type de raccordement 1'] = 'Compression ';
attrValueMap['Type de raccordement 3'] = 'Male NPTF ';
attrValueMap['Configuration'] = 'Tube to Pipe ';
attrValueMap['Taille du raccordement 3'] = '1/4 ';
attrValueMap['Matériau du corps'] = 'Brass, Forged ';
attrValueMap['Forme'] = 'Branch Tee ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Type de raccordement 2'] = 'Compression ';
attrValueMap['Taille du raccordement 2'] = '3/8 ';
attrValueMap['Taille du raccordement 1'] = '3/8 ';
attrValueMap['Type de raccordement 1'] = 'Compression ';
attrValueMap['Taille du raccordement 3'] = '1/8 ';
attrValueMap['Type de raccordement 3'] = 'Male NPTF ';
attrValueMap['Configuration'] = 'Tube to Pipe ';
attrValueMap['Matériau du corps'] = 'Brass, Forged ';
attrValueMap['Forme'] = 'Branch Tee ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Type de raccordement 2'] = 'Compression ';
attrValueMap['Taille du raccordement 2'] = '3/8 ';
attrValueMap['Taille du raccordement 1'] = '3/8 ';
attrValueMap['Type de raccordement 1'] = 'Compression ';
attrValueMap['Type de raccordement 3'] = 'Male NPTF ';
attrValueMap['Configuration'] = 'Tube to Pipe ';
attrValueMap['Taille du raccordement 3'] = '1/4 ';
attrValueMap['Matériau du corps'] = 'Brass, Forged ';
attrValueMap['Forme'] = 'Branch Tee ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Taille du raccordement 3'] = '3/8 ';
attrValueMap['Type de raccordement 2'] = 'Compression ';
attrValueMap['Taille du raccordement 2'] = '3/8 ';
attrValueMap['Taille du raccordement 1'] = '3/8 ';
attrValueMap['Type de raccordement 1'] = 'Compression ';
attrValueMap['Type de raccordement 3'] = 'Male NPTF ';
attrValueMap['Configuration'] = 'Tube to Pipe ';
attrValueMap['Matériau du corps'] = 'Brass, Forged ';
attrValueMap['Forme'] = 'Branch Tee ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Taille du raccordement 3'] = '3/8 ';
attrValueMap['Type de raccordement 2'] = 'Compression ';
attrValueMap['Taille du raccordement 2'] = '1/2 ';
attrValueMap['Type de raccordement 1'] = 'Compression ';
attrValueMap['Taille du raccordement 1'] = '1/2 ';
attrValueMap['Type de raccordement 3'] = 'Male NPTF ';
attrValueMap['Configuration'] = 'Tube to Pipe ';
attrValueMap['Matériau du corps'] = 'Brass, Forged ';
attrValueMap['Forme'] = 'Branch Tee ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Taille du raccordement 1'] = '7/16 ';
attrValueMap['Type de raccordement 1'] = 'Compression ';
attrValueMap['Matériau du corps'] = 'Brass, Forged ';
attrValueMap['Style de produit'] = 'Sleeve ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Type de raccordement 1'] = 'Compression ';
attrValueMap['Taille du raccordement 1'] = '1/2 ';
attrValueMap['Matériau du corps'] = 'Brass, Forged ';
attrValueMap['Style de produit'] = 'Sleeve ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Taille du raccordement 1'] = '5/8 ';
attrValueMap['Type de raccordement 1'] = 'Compression ';
attrValueMap['Matériau du corps'] = 'Acetal ';
attrValueMap['Style de produit'] = 'Sleeve ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Taille du raccordement 1'] = '1/4 ';
attrValueMap['Type de raccordement 1'] = 'Compression ';
attrValueMap['Matériau du corps'] = 'Acetal ';
attrValueMap['Style de produit'] = 'Sleeve ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Taille du raccordement 1'] = '5/16 ';
attrValueMap['Type de raccordement 1'] = 'Compression ';
attrValueMap['Matériau du corps'] = 'Acetal ';
attrValueMap['Style de produit'] = 'Sleeve ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Taille du raccordement 1'] = '3/8 ';
attrValueMap['Type de raccordement 1'] = 'Compression ';
attrValueMap['Matériau du corps'] = 'Acetal ';
attrValueMap['Style de produit'] = 'Sleeve ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Type de raccordement 1'] = 'Compression ';
attrValueMap['Taille du raccordement 1'] = '1/2 ';
attrValueMap['Matériau du corps'] = 'Acetal ';
attrValueMap['Style de produit'] = 'Sleeve ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Taille du raccordement 1'] = '5/8 ';
attrValueMap['Type de raccordement 1'] = 'Compression ';
attrValueMap['Matériau du corps'] = 'Brass, Forged ';
attrValueMap['Style de produit'] = 'Nut ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Taille du raccordement 1'] = '3/4 ';
attrValueMap['Type de raccordement 1'] = 'Compression ';
attrValueMap['Matériau du corps'] = 'Brass, Forged ';
attrValueMap['Style de produit'] = 'Nut ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Taille du raccordement 1'] = '7/8 ';
attrValueMap['Type de raccordement 1'] = 'Compression ';
attrValueMap['Matériau du corps'] = 'Brass, Forged ';
attrValueMap['Style de produit'] = 'Nut ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Taille du raccordement 2'] = '1/8 ';
attrValueMap['Type de raccordement 1'] = 'Compression ';
attrValueMap['Type de raccordement 2'] = 'Female NPTF ';
attrValueMap['Taille du raccordement 1'] = '3/16 ';
attrValueMap['Configuration'] = 'Tube to Pipe ';
attrValueMap['Matériau du corps'] = 'Brass, Forged ';
attrValueMap['Style de produit'] = 'Connector ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Taille du raccordement 2'] = '1/4 ';
attrValueMap['Type de raccordement 1'] = 'Compression ';
attrValueMap['Type de raccordement 2'] = 'Female NPTF ';
attrValueMap['Taille du raccordement 1'] = '3/16 ';
attrValueMap['Configuration'] = 'Tube to Pipe ';
attrValueMap['Matériau du corps'] = 'Brass, Forged ';
attrValueMap['Style de produit'] = 'Connector ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Taille du raccordement 1'] = '1/4 ';
attrValueMap['Taille du raccordement 2'] = '1/8 ';
attrValueMap['Type de raccordement 1'] = 'Compression ';
attrValueMap['Type de raccordement 2'] = 'Female NPTF ';
attrValueMap['Configuration'] = 'Tube to Pipe ';
attrValueMap['Matériau du corps'] = 'Brass, Forged ';
attrValueMap['Style de produit'] = 'Connector ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Taille du raccordement 2'] = '1/4 ';
attrValueMap['Taille du raccordement 1'] = '1/4 ';
attrValueMap['Type de raccordement 1'] = 'Compression ';
attrValueMap['Type de raccordement 2'] = 'Female NPTF ';
attrValueMap['Configuration'] = 'Tube to Pipe ';
attrValueMap['Matériau du corps'] = 'Brass, Forged ';
attrValueMap['Style de produit'] = 'Connector ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Taille du raccordement 1'] = '5/16 ';
attrValueMap['Taille du raccordement 2'] = '1/8 ';
attrValueMap['Type de raccordement 1'] = 'Compression ';
attrValueMap['Type de raccordement 2'] = 'Female NPTF ';
attrValueMap['Configuration'] = 'Tube to Pipe ';
attrValueMap['Matériau du corps'] = 'Brass, Forged ';
attrValueMap['Style de produit'] = 'Connector ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Taille du raccordement 2'] = '1/4 ';
attrValueMap['Taille du raccordement 1'] = '5/16 ';
attrValueMap['Type de raccordement 1'] = 'Compression ';
attrValueMap['Type de raccordement 2'] = 'Female NPTF ';
attrValueMap['Configuration'] = 'Tube to Pipe ';
attrValueMap['Matériau du corps'] = 'Brass, Forged ';
attrValueMap['Style de produit'] = 'Connector ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Taille du raccordement 2'] = '1/8 ';
attrValueMap['Taille du raccordement 1'] = '3/8 ';
attrValueMap['Type de raccordement 1'] = 'Compression ';
attrValueMap['Type de raccordement 2'] = 'Female NPTF ';
attrValueMap['Configuration'] = 'Tube to Pipe ';
attrValueMap['Matériau du corps'] = 'Brass, Forged ';
attrValueMap['Style de produit'] = 'Connector ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Taille du raccordement 2'] = '1/4 ';
attrValueMap['Taille du raccordement 1'] = '3/8 ';
attrValueMap['Type de raccordement 1'] = 'Compression ';
attrValueMap['Type de raccordement 2'] = 'Female NPTF ';
attrValueMap['Configuration'] = 'Tube to Pipe ';
attrValueMap['Matériau du corps'] = 'Brass, Forged ';
attrValueMap['Style de produit'] = 'Connector ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Taille du raccordement 2'] = '3/8 ';
attrValueMap['Taille du raccordement 1'] = '3/8 ';
attrValueMap['Type de raccordement 1'] = 'Compression ';
attrValueMap['Type de raccordement 2'] = 'Female NPTF ';
attrValueMap['Configuration'] = 'Tube to Pipe ';
attrValueMap['Matériau du corps'] = 'Brass, Forged ';
attrValueMap['Style de produit'] = 'Connector ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Taille du raccordement 1'] = '3/8 ';
attrValueMap['Taille du raccordement 2'] = '1/2 ';
attrValueMap['Type de raccordement 1'] = 'Compression ';
attrValueMap['Type de raccordement 2'] = 'Female NPTF ';
attrValueMap['Configuration'] = 'Tube to Pipe ';
attrValueMap['Matériau du corps'] = 'Brass, Forged ';
attrValueMap['Style de produit'] = 'Connector ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Taille du raccordement 1'] = '1/8 ';
attrValueMap['Type de raccordement 3'] = 'Compression ';
attrValueMap['Taille du raccordement 2'] = '1/8 ';
attrValueMap['Type de raccordement 1'] = 'Female NPTF ';
attrValueMap['Configuration'] = 'Tube to Pipe ';
attrValueMap['Type de raccordement 2'] = 'Male NPTF ';
attrValueMap['Taille du raccordement 3'] = '1/4 ';
attrValueMap['Matériau du corps'] = 'Brass, Forged ';
attrValueMap['Forme'] = 'Té ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Taille du raccordement 2'] = '1/4 ';
attrValueMap['Taille du raccordement 1'] = '1/4 ';
attrValueMap['Type de raccordement 2'] = 'Compression ';
attrValueMap['Type de raccordement 1'] = 'Compression ';
attrValueMap['Taille du raccordement 3'] = '1/8 ';
attrValueMap['Configuration'] = 'Tube to Pipe ';
attrValueMap['Type de raccordement 3'] = 'Female NPTF ';
attrValueMap['Matériau du corps'] = 'Brass, Forged ';
attrValueMap['Forme'] = 'Branch Tee ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Taille du raccordement 1'] = '1/4 ';
attrValueMap['Taille du raccordement 2'] = '1/8 ';
attrValueMap['Type de raccordement 1'] = 'Compression ';
attrValueMap['Configuration'] = 'Tube to Pipe ';
attrValueMap['Type de raccordement 2'] = 'Male NPTF ';
attrValueMap['Matériau du corps'] = 'Brass, Forged ';
attrValueMap['Forme'] = 'Elbow 45° ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Taille du raccordement 2'] = '1/4 ';
attrValueMap['Taille du raccordement 1'] = '1/4 ';
attrValueMap['Type de raccordement 1'] = 'Compression ';
attrValueMap['Configuration'] = 'Tube to Pipe ';
attrValueMap['Type de raccordement 2'] = 'Male NPTF ';
attrValueMap['Matériau du corps'] = 'Brass, Forged ';
attrValueMap['Forme'] = 'Elbow 45° ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Taille du raccordement 2'] = '1/8 ';
attrValueMap['Taille du raccordement 1'] = '3/8 ';
attrValueMap['Type de raccordement 1'] = 'Compression ';
attrValueMap['Configuration'] = 'Tube to Pipe ';
attrValueMap['Type de raccordement 2'] = 'Male NPTF ';
attrValueMap['Matériau du corps'] = 'Brass, Forged ';
attrValueMap['Forme'] = 'Elbow 45° ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Taille du raccordement 2'] = '1/4 ';
attrValueMap['Taille du raccordement 1'] = '3/8 ';
attrValueMap['Type de raccordement 1'] = 'Compression ';
attrValueMap['Configuration'] = 'Tube to Pipe ';
attrValueMap['Type de raccordement 2'] = 'Male NPTF ';
attrValueMap['Matériau du corps'] = 'Brass, Forged ';
attrValueMap['Forme'] = 'Elbow 45° ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Taille du raccordement 2'] = '3/8 ';
attrValueMap['Taille du raccordement 1'] = '3/8 ';
attrValueMap['Type de raccordement 1'] = 'Compression ';
attrValueMap['Configuration'] = 'Tube to Pipe ';
attrValueMap['Type de raccordement 2'] = 'Male NPTF ';
attrValueMap['Matériau du corps'] = 'Brass, Forged ';
attrValueMap['Forme'] = 'Elbow 45° ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Taille du raccordement 2'] = '3/8 ';
attrValueMap['Type de raccordement 1'] = 'Compression ';
attrValueMap['Taille du raccordement 1'] = '1/2 ';
attrValueMap['Configuration'] = 'Tube to Pipe ';
attrValueMap['Type de raccordement 2'] = 'Male NPTF ';
attrValueMap['Matériau du corps'] = 'Brass, Forged ';
attrValueMap['Forme'] = 'Elbow 45° ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Taille du raccordement 2'] = '3/16 ';
attrValueMap['Type de raccordement 2'] = 'Compression ';
attrValueMap['Type de raccordement 3'] = 'Compression ';
attrValueMap['Configuration'] = 'Tube to Tube ';
attrValueMap['Type de raccordement 1'] = 'Compression ';
attrValueMap['Taille du raccordement 1'] = '3/16 ';
attrValueMap['Taille du raccordement 3'] = '3/16 ';
attrValueMap['Forme'] = 'Té ';
attrValueMap['Matériau du corps'] = 'Brass, Extruded ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Taille du raccordement 2'] = '1/4 ';
attrValueMap['Taille du raccordement 1'] = '1/4 ';
attrValueMap['Type de raccordement 2'] = 'Compression ';
attrValueMap['Type de raccordement 3'] = 'Compression ';
attrValueMap['Configuration'] = 'Tube to Tube ';
attrValueMap['Type de raccordement 1'] = 'Compression ';
attrValueMap['Taille du raccordement 3'] = '3/16 ';
attrValueMap['Forme'] = 'Té ';
attrValueMap['Matériau du corps'] = 'Brass, Extruded ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Taille du raccordement 1'] = '1/8 ';
attrValueMap['Type de raccordement 1'] = 'Compression ';
attrValueMap['Matériau du corps'] = 'Brass, Forged ';
attrValueMap['Style de produit'] = 'Nut ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Type de raccordement 1'] = 'Compression ';
attrValueMap['Taille du raccordement 1'] = '3/16 ';
attrValueMap['Matériau du corps'] = 'Brass, Forged ';
attrValueMap['Style de produit'] = 'Nut ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Taille du raccordement 1'] = '1/4 ';
attrValueMap['Type de raccordement 1'] = 'Compression ';
attrValueMap['Matériau du corps'] = 'Brass, Forged ';
attrValueMap['Style de produit'] = 'Nut ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Taille du raccordement 1'] = '5/16 ';
attrValueMap['Type de raccordement 1'] = 'Compression ';
attrValueMap['Matériau du corps'] = 'Brass, Forged ';
attrValueMap['Style de produit'] = 'Nut ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Taille du raccordement 1'] = '3/8 ';
attrValueMap['Type de raccordement 1'] = 'Compression ';
attrValueMap['Matériau du corps'] = 'Brass, Forged ';
attrValueMap['Style de produit'] = 'Nut ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Taille du raccordement 1'] = '7/16 ';
attrValueMap['Type de raccordement 1'] = 'Compression ';
attrValueMap['Matériau du corps'] = 'Brass, Forged ';
attrValueMap['Style de produit'] = 'Nut ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Type de raccordement 1'] = 'Compression ';
attrValueMap['Taille du raccordement 1'] = '1/2 ';
attrValueMap['Matériau du corps'] = 'Brass, Forged ';
attrValueMap['Style de produit'] = 'Nut ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Taille du raccordement 1'] = '5/8 ';
attrValueMap['Type de raccordement 1'] = 'Compression ';
attrValueMap['Matériau du corps'] = 'Brass, Forged ';
attrValueMap['Style de produit'] = 'Long Nut ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Taille du raccordement 1'] = '3/4 ';
attrValueMap['Type de raccordement 1'] = 'Compression ';
attrValueMap['Matériau du corps'] = 'Brass, Forged ';
attrValueMap['Style de produit'] = 'Long Nut ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Taille du raccordement 1'] = '1/4 ';
attrValueMap['Type de raccordement 1'] = 'Compression ';
attrValueMap['Matériau du corps'] = 'Brass, Forged ';
attrValueMap['Style de produit'] = 'Long Nut ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Taille du raccordement 1'] = '5/16 ';
attrValueMap['Type de raccordement 1'] = 'Compression ';
attrValueMap['Matériau du corps'] = 'Brass, Forged ';
attrValueMap['Style de produit'] = 'Long Nut ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Taille du raccordement 1'] = '7/16 ';
attrValueMap['Taille du raccordement 2'] = '3/8 ';
attrValueMap['Type de raccordement 1'] = 'Compression ';
attrValueMap['Type de raccordement 2'] = 'Female NPTF ';
attrValueMap['Configuration'] = 'Tube to Pipe ';
attrValueMap['Matériau du corps'] = 'Brass, Forged ';
attrValueMap['Style de produit'] = 'Connector ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Taille du raccordement 2'] = '1/4 ';
attrValueMap['Type de raccordement 1'] = 'Compression ';
attrValueMap['Type de raccordement 2'] = 'Female NPTF ';
attrValueMap['Taille du raccordement 1'] = '1/2 ';
attrValueMap['Configuration'] = 'Tube to Pipe ';
attrValueMap['Matériau du corps'] = 'Brass, Forged ';
attrValueMap['Style de produit'] = 'Connector ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Taille du raccordement 2'] = '3/8 ';
attrValueMap['Type de raccordement 1'] = 'Compression ';
attrValueMap['Type de raccordement 2'] = 'Female NPTF ';
attrValueMap['Taille du raccordement 1'] = '1/2 ';
attrValueMap['Configuration'] = 'Tube to Pipe ';
attrValueMap['Matériau du corps'] = 'Brass, Forged ';
attrValueMap['Style de produit'] = 'Connector ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Taille du raccordement 2'] = '1/2 ';
attrValueMap['Type de raccordement 1'] = 'Compression ';
attrValueMap['Type de raccordement 2'] = 'Female NPTF ';
attrValueMap['Taille du raccordement 1'] = '1/2 ';
attrValueMap['Configuration'] = 'Tube to Pipe ';
attrValueMap['Matériau du corps'] = 'Brass, Forged ';
attrValueMap['Style de produit'] = 'Connector ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Taille du raccordement 2'] = '1/8 ';
attrValueMap['Type de raccordement 1'] = 'Compression ';
attrValueMap['Taille du raccordement 1'] = '3/16 ';
attrValueMap['Configuration'] = 'Tube to Pipe ';
attrValueMap['Type de raccordement 2'] = 'Male NPTF ';
attrValueMap['Matériau du corps'] = 'Brass, Forged ';
attrValueMap['Style de produit'] = 'Tank Fitting ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Style de produit'] = 'Insert ';
attrValueMap['Taille du raccordement 1'] = '1/8 ';
attrValueMap['Type de raccordement 1'] = 'Push-to-Connect ';
attrValueMap['Matériau du corps'] = 'Brass, Forged ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Style de produit'] = 'Insert ';
attrValueMap['Type de raccordement 1'] = 'Push-to-Connect ';
attrValueMap['Taille du raccordement 1'] = '3/8 ';
attrValueMap['Matériau du corps'] = 'Brass, Forged ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Forme'] = 'Elbow 90° ';
attrValueMap['Taille du raccordement 2'] = '3/8 ';
attrValueMap['Taille du raccordement 1'] = '5/8 ';
attrValueMap['Type de raccordement 1'] = 'Compression ';
attrValueMap['Matériau du corps'] = 'Brass, Forged ';
attrValueMap['Configuration'] = 'Tube to Pipe ';
attrValueMap['Type de raccordement 2'] = 'Male NPTF ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Taille du raccordement 1'] = '5/16 ';
attrValueMap['Style de produit'] = 'Connector ';
attrValueMap['Taille du raccordement 2'] = '1/2 ';
attrValueMap['Type de raccordement 1'] = 'Compression ';
attrValueMap['Type de raccordement 2'] = 'Female NPTF ';
attrValueMap['Matériau du corps'] = 'Brass, Forged ';
attrValueMap['Configuration'] = 'Tube to Pipe ';
attrArray.push(attrValueMap);
var attrValueMap = {};
attrValueMap['Taille du raccordement 1'] = '5/16 ';
attrValueMap['Style de produit'] = 'Connector ';
attrValueMap['Taille du raccordement 2'] = '3/4 ';
attrValueMap['Type de raccordement 1'] = 'Compression ';
attrValueMap['Matériau du corps'] = 'Brass, Forged ';
attrValueMap['Configuration'] = 'Tube to Pipe ';
attrValueMap['Type de raccordement 2'] = 'Male NPTF ';
attrArray.push(attrValueMap);
Parker's compression fittings require no flaring, soldering or other preparation of tubing necessary to assemble. Offered in both forgings and extrusions compression fittings meet functional requirements of SAE J-512
Caractéristiques techniques
Secteur :
Industrial Manufacturing Equipment, Material Handling, Printing, Marine
Marque :
Parker
Forme :
Shape Dependent on Configured Part
Type de produit :
Compression Fittings
Type de raccordement :
Compression, Thread
Technologie :
Fluid & Gas Handling
Division :
Fluid System Connectors Division
Matériau du corps :
Extruded Brass, Forged Brass
Région d'origine :
United States
Matériau du tube :
Copper, Brass, Steel, Polyamide, Aluminum, Thermoplastic
Pour le type de fluide :
Water, Lubricants (Machining Oil), Fuels, Hydraulic Oil, Air (Compressed Air), Chemicals (Disinfectants), Air, Inert Gases, Non-combustible Gases
Spécifications respectées :
SAE J512
Pression de service maximale :
Dependent on Size bar, Dependent on Size psi
FAILURE OR IMPROPER SELECTION OR IMPROPER USE OF THE PRODUCTS DESCRIBED HEREIN OR RELATED ITEMS CAN CAUSE DEATH, PERSONAL INJURY AND PROPERTY DAMAGE. This document and other information from Parker-Hannifin Corporation, its subsidiaries and authorized distributors provide product or system options for further investigation by users having technical expertise. The user, through its own analysis and testing, is solely responsible for making the final selection of the system and components and assuring that all performance, endurance, maintenance, safety and warning requirements of the application are met. The user must analyze all aspects of the application, follow applicable industry standards, and follow the information concerning the product in the current product catalog and in any other materials provided from Parker or its subsidiaries or authorized distributors. To the extent that Parker or its subsidiaries or authorized distributors provide component or system options based upon data or specifications provided by the user, the user is responsible for determining that such data and specifications are suitable and sufficient for all applications and reasonably foreseeable uses of the components or systems.....
Click here to view all product safety information.
Description complète du produit
Parker's compression fittings are economical and offered in both extrusions and forgings. These compression fittings require no flaring, soldering, tube preparation or special tools to operate. Compression fittings are especially useful in installations that may require occasional disassembly or partial removal for maintenance since the fitting can be broken and remade without affecting the integrity of the joint. Compression fittings are also used in situations where a heat source, in particular a soldering torch, is prohibited.
Use with copper, aluminum and the following Parker Parflex Division tubing:
• Polyethylene
• Nylon
• Polypropylene
Markets:
• Industrial
• Packaging
• Pneumatic
• Printing
• Compressors
• Marine
Features/Benefits:
• All brass construction
• Economical
• Long Nut for vibration
• UL listed for flammable liquid
• Meets SAE J-512
• Acetal sleeve for use with thermoplastic tubing
Applications:
• Air lines
• Lubrication lines
• Cooling lines
• Fluid transfer
• Water lines
• Automotive process
Custom configurations and sizes are available upon request. Contact us for additional information.
