OBSOLETE: Light Steam Trace Bundles - LT-Temptrace™ | Série de produits

Filtrer par

    Aucun filtre slectionn

Nombre de tubes

Matériau du tube de traitement

D.E. du tube de traitement (po)

D.E. tube du traceur (po)

Créez votre compte Parker aujourd'hui !

Créez un compte pour gérer tout ce que vous faites avec Parker, de vos préférences shopping à votre accès aux applications.


LOADING IMAGES
OBSOLETE: Light Steam Trace Bundles - LT-Temptrace™

OBSOLETE: Light Steam Trace Bundles - LT-Temptrace™ OBSOLETE

Où acheter

Note: This product is no longer available - please contact us for further assistance.

Caractéristiques techniques

  • Nombre de tubes : 1 to Multiple
  • Matériau du cache : Flame Resistant - PVC, TPE, PE & PU, PU, TPR, LDPE, PVDF
  • Température de service maximale : 204 °C, 400 °F, 400 °F (higher temperature rated designs are available), 204 °C (higher temperature rated designs are available), 200 °F (Process tube temperature at an ambient temperature of 80°F), Process tube temperature should not exceed 93C at 26.6C ambient temperature °C
  • Matériau du tube de traitement : Welded Stainless Steel Type 316/316L ASTM A269 (Other Materials available Upon Request. See How to Specify and Order for Details)
  • Diamètre extérieur du tube de traitement : 1/8 to 1 inch (metric sizes also available from 2mm to 16mm)
  • Épaisseur de paroi des tubes de traitement : 0.16 to 0.83 (metric sizes available from .89mm to 2.5mm) inch
  • Matériau du tube du traceur : Seamless Copper Type 122 DHP ASTM B68/B75 is standard, other materials available upon request (see How to Specify & Order for details)
  • Diamètre extérieur du tube du traceur : 1/8 to 1, metric sizes also available from 2mm to 16mm inch
  • Épaisseur de paroi des tubes du traceur : 0.16 to 0.83, metric sizes available from .89mm to 2.5mm inch
  • Diamètre extérieur nominal : 1.3 to 1.7 inch
  • Rayon de courbure minimal : 10 to 18 inch
  • Exigences de longueur du centre de support horizontal : When installed horizontally, supports are needed every 5 to 6 ft
  • Exigences de hauteur du centre de support vertical : 10 to 15 ft
  • Couleur du cache : Black is standard. Other cover colors are available upon request (see How to Specify & Order or CAT 4200-M-2 for more details)
Safety Warning

Description complète du produit

Parker LT Temptrace™ Light Steam Trace Tubing consists of single or multiple process tubes insulated from a single tracer with non-hygroscopic glass fiber insulation and a black, 105°C rated, flame-resistant PVC (FR-PVC) jacket. The LT Temptrace™ permits use of high pressure steam to heat trace instrument lines carrying water, light oil, paraffin, paraffin-based fluids and temperature-sensitive chemicals. The tough, flame-resistant PVC jacket protects the tubing against corrosive atmospheres, water, oils, acids, alkalies and most chemicals, allowing it to operate successfully under a variety of conditions. The LT Temptrace™ is ideal for simple instrument line freeze protection and viscosity maintenance applications. For order information and specific operating parameters, please review the literature listed under the Product Support tab.

Markets:
• Chemical Processing and Refineries

Features:
• Black, flame-resistant PVC jacket to protect tubing against corrosive atmospheres, water, oils, acids, alkalies and most chemicals
• Air-spaced, cross wrapped applied non-hygroscopic fiberglass thermal insulation for minimum heat loss
• The insulated tracer provides a more constant process tube temperature over long tubing runs
• Accessories are available for connecting multiple lengths of steam trace bundles and sealing bundle ends
• Utilizes saturated steam pressures up to 230 PSIG and 400°F to maintain process tube temperatures of 200°F or less

Applications:
• Instrument lines carrying water, light oil, paraffin, paraffin-based fluids and temperature-sensitive chemicals
• Simple instrument line freeze protection
• Viscosity maintenance

Technical Specifications:
• Standard product has a Maximum Temperature Rating (MTR) of 400°F (204.4°C). Higher temperature designs are available – consult the division for details. MTR is the maximum allowable temperature of the tracing fluid; temperatures in excess of this may damage the product or alter its performance

NOTE: It is absolutely necessary to seal the ends against contamination from moisture and/or corrosive liquids; Parker Hannifin cannot assume any liability for product damage caused by moisture from unsealed ends.

Documents annexes

Compliance, Certifications & Safety
Parflex ABS Certification for Tubes and Tube Bundles
Parker Safety Guide for Selecting Hose, Tubing, Fittings and Accessories - Parflex
×
Afficher les catalogues
Partager/Envoyer par e-mail
Imprimer
Produits Nombre de tubes Matériau du tube de traitement D.E. du tube de traitement (po) D.E. tube du traceur (po)
LT-20435A-10430 1 Welded Stainless Steel Type 316/316L ASTM A269 1/4 1/4
LT-20635A-10430 1 Welded Stainless Steel Type 316/316L ASTM A269 3/8 1/4
LT-20835A-10430 1 Welded Stainless Steel Type 316/316L ASTM A269 1/2 1/4
LT-20635A-10632 1 Welded Stainless Steel Type 316/316L ASTM A269 3/8 3/8
LT-20835A-10632 1 Welded Stainless Steel Type 316/316L ASTM A269 1/2 3/8
LT-20435B-10430 2 Welded Stainless Steel Type 316/316L ASTM A269 1/4 1/4
LT-20635B-10430 2 Welded Stainless Steel Type 316/316L ASTM A269 3/8 1/4
LT-20835B-10430 2 Welded Stainless Steel Type 316/316L ASTM A269 1/2 1/4
LT-20635B-10632 2 Welded Stainless Steel Type 316/316L ASTM A269 3/8 3/8
LT-20835B-10632 2 Welded Stainless Steel Type 316/316L ASTM A269 1/2 3/8
Close [ x ]
Full Screen
687PDC
687563