Prep-Air II Lubricators are available in micro-mist and standard-mist types. These lubricators inject a mist of oil into the flowing air stream to automatically provide the correct amount of internal lubrication for air tools and other pneumatic devices. Prep-Air II Lubricators can be precisely adjusted to a very low oil flow rate because only a portion of the oil drops seen in the sight dome travels downstream. Proportional oil is delivered over a wide range of air flows and precision needle valve assures repeatable oil delivery. A slight adjustment can provide a desired mist rate. These units are ideal for low and high flow applications that demand uniform lubrication in a robust package. Prep-Air II Lubricators can be mounted using a modular connector to other Prep-Air II products. F442 oil is suggested for lubrication and will allow the product to perform at peak performance. The lubricators should be used where only a very small amount of lubrication is desirable or where it is necessary for the oil to remain suspended in the air stream for long distances.
The Prep-Air II Micro-Mist Lubricators (06L and 07L) are designed to provide optimum lubrication with fine micro-mist particles of 2 micron or smaller, even through complex piping arrangements.
The Prep-Air II Standard-Mist Lubricators (15L, 16L and 17L) are designed to provide lubrication with larger particles.
Markets:
• Air and Gas
• Appliances
• Entertainment Automation
• Factory Automation
• Food and Beverage
• Machine Tools
• Misc. Industrial
• Misc. Manufacturing
• Misc. Processing
• Molding
• Packaging Machinery
• Printing and Marking Equipment
• Vehicle Assembly Facilities
• Wearing Apparel
Features/Benefits:
• Proportional oil delivery over a wide range of air flows
• Fill from top under system pressure
• Robust construction
• Easily configurable
• Ideal for high and low flow applications that demand uniform lubrication
• Provides simple adjustment of delivery rate
• Precision needle valve assures repeatable oil delivery
• Transparent site dome for 360 degree visibility
• Bowl can be filled while airline is under pressure
Micro-Mist Lubricators
• Generates oil particles of 5 microns or smaller downstream to lubricate systems
• Yellow fill cap identifies micro-mist lubricator
Standard-Mist Lubricators
• Black fill cap identifies stand-mist lubricator
Applications:
• To be used in combination with valves and cylinders
• To protect tools and cylinder against corrosion
• To reduce friction
• At the transfer point from workshop to machine
• In combination with tools for assembly and on the shop floor
• For all type of machines and tools pneumatic driven
