Irányváltó szelepek

Parker’s D1VW directional control valves are high performance direct operated hydraulic valves. These are wet armature design solenoid valves in either 2 position or 3 position configurations. The D1VW valve conforms to D03 (NG6) mounting pattern.

The H Series Network Portal offers modular digital or analog inputs and outputs directly on the valve manifold thereby reducing the cost of I/O on machine and allows for easy centralized machine design.

Parker’s VP120 series is a sectional, pressure compensated load sensing directional control valve for mobile machines.

The base mounted H Series ISO -1 & -2 valve series covers the 5 ISO sizes (02 to 3) with Qn from 540 to 5890 Nl/mn. The H Universal manifold offers the opportunity to mix sizes from 02 to 2 and offers the flexibility for pneumatic zones in the manifold.

The H Series ISO Valve is a family of base mounted valves available in five size ranges (Sizes 02, 01, 1, 2 and 3) with flow from 0.55 to 6 Cv. The ability to mix sizes on one manifold adds space and cost savings to machine design.

A Parker 2-irányú poppet mágnesszelepei egy irányba szinte szivárgásmentesen ellenőrzik az áramlást, másik irányba szabad áramlást biztosítanak; normál nyitott/zárt konfigurációk választhatók. Nyomás: max. 350 bar, áramlás: max. 26

A Parker új, kompakt D1FC (NG06) / D3FC (NG10) szelepei csúcstechnológiát képviselnek, nagy dinamikával és áramlással optimalizált sebességet kínálva. Opcionálisan EtherCAT® interfésszel érhetők el a gyors adatátvitelhez és rövid cik

The ISO H-series, size 01 and 02, is a dual 3/2, 5/2, or 5/3 subbase valve. It can be plugin or non-plugin, and is mounted on a subbase or manifold. Electrical connection options are terminal block, 6" lead wires, and collective wiring / fieldbus.

A D1VW NG06 (CETOP 03) egy be-/kikapcsoló szelep, amely magas funkcionális határokat és energiatakarékos, alacsony nyomásesést biztosít. Rendelhető lágy váltás funkcióval vagy robbanásbiztos kivitelben (ATEX, IECEx szerint).

This range of valves has patented seal wear compensating technology for reliable and durable sealing, protecting any system whether under pressure or vacuum.

Parker's K220LS mobile valve is characterized by industry leading properties regarding robustness, control precision and energy efficiency.Parker K220LS is a sectional-built, load sensing, directional control valve for mobile machinery.

The D1VW in NG06 (CETOP 03) is an on/off valve which provides high functional limits in combination with a very low, energy-saving pressure drop. It is optionally available with soft shift option

Parker’s VPL Series is a stackable, multi-section, load-sensing, pressure-compensated directional valve for mobile equipment. Work Port flows rated to 30 GPM at 5000 PSI.

Parker’s VP/VPO series valve is a stackable, multi-section, load-sensing, pressure-compensated directional valve for mobile equipment.

The DX ISOMAX series, size 01 and 02, is a 5/2 or 5/3 subbase valve. They are non-plugin only, have a ceramic seat for resistance to contamination, and can be mounted on a subbase or manifold. Each coil is wired with a 15 mm 3 pin DIN connector.

H series ISO, Micro, and Moduflex valves use protocols DeviceNet, Profibus-DP, AS-i, CANopen, and Interbus-S.  Control up to 16 solenoids when using an industrial network.  AS-i modules are available with up to 8 inputs, and up to 8 solenoid outputs.

The NG10 direct operated directional control valve series D3W provides high functional limits up to 150 l/min in combination with a low, energy saving pressure drop.

Parker’s VP170 series is a sectional, pressure compensated load sensing directional control valve for mobile machines.

The DX ISOMAX series, size 1, 2, and 3, is a 5/2 or 5/3 subbase valve. They are non-plugin only, have a ceramic seat for resistance to contamination, and can be mounted on a subbase or manifold. Each coil is wired with a 30 mm 3 pin DIN connector.

The P2M IO-Link Node allows for simple, cost efficient connection to any IO-Link master. It can connect to any Safe Power Supply and connect IO-Link to three of our valve products: Moduflex, H Micro and all 5 sizes of H ISO valves (15407 & 5599)

Direct operated DFplus control valves D1FP in NG06 (CETOP 03) and D3FP in NG10 (CETOP 05) meet highest requirements in terms of dynamics combined with high flow, optionally with EtherCAT interface. The preferred choice for demanding hydraulic controls!

Parker's thermal bypass valves modulate fluid temperature by shifting return line flow through the cooler, or bypassing it directly to the reservoir.

Parker L90LS mobile valve is characterized by industry leading properties regarding robustness, control precision and energy efficiency. Parker L90LS is a sectional-built, load sensing, directional control valve for mobile machinery.

Parker’s V20 Series valve is a sectional, open center, CF (constant flow), or closed center load sensing (variable flow) directional control valve for mobile equipment. It is typically applied between 15 and 25 GPM pump flow at 3500 psi.

directional-control-valves-1

<article class="ph-card-basic">
	<header class="ph-card-basic__header">
		<h2 class="ph-card-basic__title">Get your Parker account Today!</h2>
	</header>
	<div class="ph-card-basic__body">
		<p>Create one account to manage everything you do with Parker, from your shopping preferences to your application access.</p>
	</div>
	<footer class="ph-card-basic__footer">
		<a href="[registerUrl]" class="button accent-button round-button small-button">Register now</a>
	</footer>
</article>