Proporcionális szelepek

Parker’s VP120 series is a sectional, pressure compensated load sensing directional control valve for mobile machines.

A Parker új, kompakt D1FC (NG06) / D3FC (NG10) szelepei csúcstechnológiát képviselnek, nagy dinamikával és áramlással optimalizált sebességet kínálva. Opcionálisan EtherCAT® interfésszel érhetők el a gyors adatátvitelhez és rövid cik

Thermally compensated 2-way normally closed (NC) proportional valve designed to maintain accurate and repeatable flow over a wide range of media. Ideal for medical and analytical applications that require precision control and flow up to 56 slpm.

Parker’s VPL Series is a stackable, multi-section, load-sensing, pressure-compensated directional valve for mobile equipment. Work Port flows rated to 30 GPM at 5000 PSI.

Parker’s VP/VPO series valve is a stackable, multi-section, load-sensing, pressure-compensated directional valve for mobile equipment.

The VSO® LowPro is a miniature proportional valve designed for flow rates up to 57 SLPM with a typical power requirement of 1 Watt, and just 16 mm wide by 14 mm tall. Ideal for Respiratory, Patient Monitoring and Flow or Pressure Control Applications.

Parker’s VP170 series is a sectional, pressure compensated load sensing directional control valve for mobile machines.

Designed for 1 SCCM to 6.5 SLPM gas flow control in analytical instruments, the Parker VSO® LowPro GC proportional valve is compact, durable and easy to mount. High duty cycle and dynamic temperature range conforms to all analytical platforms.

Direct operated DFplus control valves D1FP in NG06 (CETOP 03) and D3FP in NG10 (CETOP 05) meet highest requirements in terms of dynamics combined with high flow, optionally with EtherCAT interface. The preferred choice for demanding hydraulic controls!

Parker’s V20 Series valve is a sectional, open center, CF (constant flow), or closed center load sensing (variable flow) directional control valve for mobile equipment. It is typically applied between 15 and 25 GPM pump flow at 3500 psi.

Parker’s V10 Series valve is a sectional, open center, CF (constant flow), directional control valve for mobile equipment. It is typically applied between 5 and 15 GPM pump flow at 3500 psi.

Parker's proven standard performance pilot operated proportional DC valves series D*1FB with onboard electronics are universally applicable and feature progressive flow characteristics for sensitive flow rate adjustment.

Parker’s VA35/VG35 is a sectional, open center, CF (constant flow), directional control valve for mobile machines. It is typically applied between 20 and 45 GPM pump flow.

Parker’s V20EH is a sectional, open center, CF (constant flow), directional control valve for mobile machines. It is Electro-Hydraulic actuated and can be applied up to 25 GPM

Parker's VG35EH valve is a sectional, open center, CF (constant flow), directional control valve for mobile machines. It is Electro-Hydraulic actuated and typically applied between 30 and 65 GPM pump flow.

With a high-definition position feedback system and an excellent price-performance ratio, Parker's pilot operated proportional directional control valves series D*1FC offer numerous competitive advantages for users - optionally with EtherCAT® interface.

Parker’s PC55 series valve is a sectional, pressure compensated load sensing directional control valve for mobile machines.

The VSO® MAX HP Series is a 2-Way Normally Closed proportional valve providing high flow and high pressure configurations, at less than 2.2 watts of power.  This family consists of two orifice sizes and three voltage options.

The pilot operated 2-way high response valves series TDP provide a precise control of high flows at maximum dynamics. Typical applications for these slip-in cartridge proportional throttle valves are die cast, injection molding and hydraulic presses.

The proven 2-way proportional throttle valves series TDA feature a precise control of large oil flows for an efficient, reliable operation.

Parker's pilot operated servo proportional directional control valve series D*1FP is the ultimate choice for demanding hydraulic applications. The valves are optionally available with EtherCAT® interface.

Parker's proven direct operated proportional directional control valves series D1FB OBE (NG06) / D3FB OBE (NG10) are universally applicable. The standard performance valves with onboard electronics provide high repeatability and low hysteresis.

With flow rates up to 9500 l/min and fast response times, proportional throttle valves series TEA are predestined for injection molding and die cast applications. The directional valve integrated in the pilot circuit provides the safety function.

Parker's proven direct operated proportional DC valves series D1FB (NG06) / D3FB (NG10) are universally applicable, provide high repeatability and low hysteresis. The D1FB*EE with explosion proof solenoids allows the usage in hazardous environments.

Parker's proven standard performance pilot operated proportional DC valves series D*1FB are universally applicable and provide progressive flow characteristics for sensitive flow rate adjustment. Also available as ex-proof version conform to ATEX.

Parker offers a range of proportional valves employing powerful voice-coil valve technology, which allows higher flows from smaller valves. These valves provide a high response and are offered with or without on-board control electronics.

proportional-valves

<article class="ph-card-basic">
	<header class="ph-card-basic__header">
		<h2 class="ph-card-basic__title">Get your Parker account Today!</h2>
	</header>
	<div class="ph-card-basic__body">
		<p>Create one account to manage everything you do with Parker, from your shopping preferences to your application access.</p>
	</div>
	<footer class="ph-card-basic__footer">
		<a href="[registerUrl]" class="button accent-button round-button small-button">Register now</a>
	</footer>
</article>