Accessori/kit per valvole

L''ampia gamma di elettrovalvole e di valvole proporzionali a cartuccia di Parker è integrata dalla vasta scelta di opzioni di bobine AC e DC IP69K della serie Super Coil.  Disponibili a catalogo tensioni e stili di terminazione diversi.

La valvola di massima diretta PLC di Parker ha eccellenti caratteristiche prestazionali. La PLC è realizzata come una cartuccia e protegge i componenti dai picchi di pressione in un impianto idraulico.

Parker C-Series Evaluation Manifolds are perfect for sample testing and come with all accessories necessary for installation.

Parker C-Series Replacement Screws for C7, C15, or C21 miniature cartridge valves.

Le valvole interruttori di servizio e controllo serie PXB forniscono segnali di uscita doppi pneumatici ed elettrici. Progettate per knock out elettrici standard da Ø22 mm, le valvole hanno una serie di opzioni di pulsanti e attuatori di interruttore.

Parker C-Series Replacement O-Rings for C-Series miniature cartridge valves create a perfect seal with manifolds manufactured in accordance to Parker recommendations.

Gli interruttori di soglia compatti a valvola pneumatica 3/2 serie PXC normalm. chiusi con corpo metallico hanno collegam. pneumatici a innesto e garantiscono elevato duty cycle di produzione e lunga durata. Per i settori manifatturiero o di imballaggio.

Gli indicatori visivi della serie PXV offrono informazioni immediate e chiare sull'azionamento della pressione. Gli indicatori sono disponibili in dimensioni pari a Ø 22 mm e Ø 30 mm, su un'ampia gamma di colori.

Parker’s C-Series Replacement Clips designed to work with Parker’s C-Series C7, C15, and C21 miniature cartridge valves.

Push button and panel valves are 3-way valves that are mounted in control panels for Human-Machine-Interface to remotely operate other pneumatic devices. Operators include push button flush and mushroom, selector, and sotary selector types.

The two hand control modules are used in applications that require both the operators hands to be occupied before a pneumatic signal is sent in an automation system. Pneumatic signal is generated only if both push buttons are activated within 0.5 seconds

Pneumatic Limit Switches are compact manual mechanical 3 way valves. Mechanical operators include both metal and plastic rollers and plungers, as well as whisker valves. Valves are either normally closed or normally open.

Gli intensificatori di pressione Parker della serie SD500 sono particolarmente adatti per l'uso nelle macchine utensili. Sono un sistema conveniente, in particolare per le applicazioni di serraggio.

Parker’s SRS Series single station aluminum manifold has .078” barbs installed for connection to 5/64” ID tubing. The FKM Gasket (195-000139-001) and 2 mounting screws (191-000100-009) are required and sold separately.

Pressostati elettroidraulici serie PSB: dispositivi solidi ad alta durata e prestazioni che forniscono un segnale elettrico quando la pressione rilevata supera o scende al di sotto del valore impostato. La pressione d'esercizio massima è 315 bar.

Parker’s RPL In-line Relief Valve rated at 60 GPM is designed for limiting the maximum pressure which can be applied to the portion of the hydraulic circuit where it is installed.

Parker’s S, H, SM, & HM are two position Selector Valves. The S & SM Models are designed for directing an input flow to two different selectable circuits. The H & HM Models are designed for adding float (or freewheeling) functionality to a circuit.

Parker’s LO & LOA are Pilot Operated Check Valves that are designed to lock a cylinder, or part of a circuit, without leakage while a control valve is in the neutral position.

Parker’s DXV Crossover Relief Valve is a fast, direct acting design that provides pressure overload protection for an actuator where the relieved flow is 10 GPM or less.

Parker’s WJL In-line Relief Valve rated at 25 GPM is designed for limiting the maximum pressure which can be applied to the portion of the hydraulic circuit where it is installed.

Parker’s CFQ Adjustable Flow Divider Valve is designed for providing a Controlled Flow source through one of three optional flow ranges from 0-30 GPM.

Parker’s DS, Two Position, Double Selector valve is designed for directing an A & B input to two different selectable circuits.

Parker’s DWV Crossover Relief Valve is a fast-acting differential area design that provides pressure overload protection for an actuator where the relieved flow is 30 GPM or less. They are installed between the control valve and actuator.

Parker’s PD and PDC accessory valves are pressure compensated flow dividers that are designed for applications where two separate hydraulic circuits are to be served from a single pump.

valves-accessories-kits

<article class="ph-card-basic">
	<header class="ph-card-basic__header">
		<h2 class="ph-card-basic__title">Get your Parker account Today!</h2>
	</header>
	<div class="ph-card-basic__body">
		<p>Create one account to manage everything you do with Parker, from your shopping preferences to your application access.</p>
	</div>
	<footer class="ph-card-basic__footer">
		<a href="[registerUrl]" class="button accent-button round-button small-button">Register now</a>
	</footer>
</article>