Uszczelki tłoczyska

Rod seal for hydraulic cylinders, single-acting. Compact seal design with anti-extrusion ring. Enhanced sealing performance in non-pressurized conditions. For high pressures and extreme pressure peaks. Robust design with extreme wear resistance. ISO 5597

Rod seal for hydraulic cylinders, single-acting, rubber fabric compact design. For extrem pressure applications. Robust seal profile for harsh operating conditions.

Rod chevron sealing set for hydraulic cylinders, single-acting. Contains of multiple chevrons, a header ring and a back-up ring.<br/>The number of chevrons vary from 3 up to 10 chevrons. Usually 5 chevrons are prefered.

Rod seal for hydraulic cylinders, single-acting, polyurethane compact PARK-O-PAK® design. For high-pressure applications. Robust seal profile for harsh operating conditions.

Rod seal for hydraulic cylinders, single-acting, polyurethane compact PARK-O-PAK® design. For high-pressure applications. Robust seal profile for harsh operating conditions. Short axial assembly length.

Rod seal for hydraulic cylinders, single-acting, polyurethane compact PARK-O-PAK® design. For high-pressure applications. Robust seal profile for harsh operating conditions. Long axial assembly length.

Rod seal for hydraulic cylinders, single-acting, polyurethane u-cup design. For high-pressure applications. Robust seal profile for harshest operating conditions. ISO 5597, ISO 6020.

Rod seal and wiper for pneumatic cylinders. U-cup design. Combines the functions sealing, wiping and holding in place. Robust design for applications with high temperatures and risk of contamination.

Rod seal, double-acting, PTFE slipper seal design. Low friction. Suitable for o-ring grooves. For limited dynamic conditions.

Rod seal for pneumatic cylinders, double-acting, PTFE slipper seal design. Low friction.

Rod sealing set for hydraulic cylinders, double-acting, PTFE slipper seal design. Low friction. For high-pressure applications.

Rod sealing set for hydraulic cylinders, double-acting, PTFE slipper seal design. Low friction. For high-pressure applications. ISO 7425.

Rod seal and wiper for pneumatic cylinders. U-cup design.

Rod seal and wiper for pneumatic cylinders. U-cup design. Short axial length.

Rod seal and wiper for pneumatic cylinders. U-cup design with front-face cover lip. Combines the functions sealing, wiping and holding in place. Robust design with extreme wear resistance.

Rod seal and wiper and guidance systems for pneumatic cylinders. U-cup design. Press-in-place design. Robust design with extreme wear resistance.

Rod seal and wiper for non-rotating pneumatic cylinders with flattened piston rods. U-cup design. Combines the functions sealing, wiping and holding in place. Robust design with extreme wear resistance.

Rod seal and wiper for pneumatic cylinders. U-cup design. Combines the functions sealing, wiping and holding in place. Robust design with extreme wear resistance.

Rod seal for hydraulic cylinders, single-acting, polyurethane u-cup design with anti-extrusion ring. For high-pressure applications and extreme pressure peaks. Robust seal profile for harshest operating conditions. ISO 5597, ISO 6020.

Rod seal. Inside dynamic sealing on reciprocating rods. FlexiSeal. Spring-energized PTFE seal. Axially short design.

Rod seal, inside dynamic sealing on reciprocating rods. FlexiSeal, spring-energized PTFE seal, high-pressure.

Rod seal for pneumatic cylinders, single-acting. U-cup design.

Rod seal and wiper for pneumatic cylinders. Two-piece U-cup design. Combines the functions sealing, wiping and holding in place.

Rod seal and wiper for pneumatic cylinders. U-cup design. Easy assembly due to snap ring. For high temperatures.

Rod seal and wiper for non-rotating pneumatic cylinders with flattened piston rods. U-cup design. Short axial length.

Uszczelki tłoczysk i uszczelki buforowe do cylindrów i siłowników hydraulicznych odcinają układ od atmosfery. Uszczelki tłoczysk odgrywają bardzo ważną rolę, gdyż nieszczelność w tym miejscu może oznaczać wyciek płynu hydraulicznego na zewnątrz i zanieczyszczenie środowiska. Uszczelki tego typu oferujemy w wersjach jedno- i dwustronnego działania najlepiej jednak stosować wersje jednostronnego działania. Dysponując bogatym asortymentem mieszanek elastomerowych oraz najrozmaitszymi profilami uszczelek możemy spełnić wymagania praktycznie każdego odbiorcy. Uszczelki tego typu zwykle współpracują z elementami zbierającymi w systemach uszczelnień głowic cylindrów.

rod-seals

<article class="ph-card-basic">
	<header class="ph-card-basic__header">
		<h2 class="ph-card-basic__title">Załóż konto Parker już dziś!</h2>
	</header>
	<div class="ph-card-basic__body">
		<p>Utwórz jedno konto do zarządzania wszystkimi działaniami w witrynie firmy Parker od preferencji zakupowych do dostępu do aplikacji.</p>
	</div>
	<footer class="ph-card-basic__footer">
		<a href="[registerUrl]" class="button accent-button round-button small-button">Zarejestruj teraz</a>
	</footer>
</article>

This store is mainly accessed by Poland users